Abstract
By taking a galvanizing bath with inductors from an Iron and Steel Co., Ltd as an example, the distributions of Lorentz force and generated heat in the inductor are simulated. As a result, the zinc flow and the temperature distribution driven by the Lorentz force and the generated heat in the inductor of a galvanizing bath are simulated numerically, and their characteristics are analyzed. The relationship of the surface-weighted average velocity at the outlet and the temperature difference between the inlet and the outlet and the effective power for the inductor is studied. Results show that with an increase in effective power for the inductor, the surface-weighted average velocity at the outlet and the temperature difference between the inlet and the outlet increase gradually. We envisage this work to lay a foundation for the study of the performance of the galvanizing bath in future.
Similar content being viewed by others
References
F. Ilinca, F. Ajersch, C. Baril, and F.E. Goodwin: Int. J. Numer. Meth. Fluids, 2007, vol. 53, p. 1629–46.
P. Toussaint, P. Vernin, B. Symoens, L. Segers, M. Tolley, R. Winand, and M. Dubois: Ironmaking Steelmaking, 1996, vol. 23, p. 357–60.
C. Koutsaris, F. Ajersch, F. Ilinca, and F.E. Goodwim: Proc. of 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, Galvatech 2011, Genova, Italy, 2011.
F. Ajersch, F. Ilinca, J.-F. Hétu, and F.E. Goodwin: Proc. of 7th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, Galvatech ’07, Osaka, Japan, 2007.
F. Ilinca, J.-F. Hétu, and F. Ajersch: Numerical Heat Transfer, Part A: Applications, 2003, vol. 44, p. 463–82.
F. Ajersch, F. Ilinca, J.-F. Hétu, and F.E. Goodwin: Can. Metall. Q., 2005, vol. 44, p. 369–78.
F. Ajersch, F. Ilinca, and J.-F. Hétu: Metall. Mater. Trans. B, 2004, vol. 35B, p. 161–70.
F. Ajersch, F. Ilinca, and J.-F. Hétu: Metall. Mater. Trans. B, 2004, vol. 35B, p. 171–78.
F. Ajersch, C. Binet, F.E. Goodwin, K.S. Turke, and P.S. Kolisnyk: Proc. of Galvatech’98, Iron & Steel Society, 1998, p. 642.
Y.H. Kim, Y.W. Cho, S.-H. Chung, J.-D. Shim, and H.Y. Ra: ISIJ Int., 2000, vol. 40, p. 706–12.
H.S. Park, K.-A. Han, J. Lee, and J.-W. Shim: ISIJ Int., 2008, vol. 48, p. 224–29.
S.K. Dash, M. Dutta, and N. Rajesh: ISIJ Int., 2005, vol. 45, p. 1059–65.
Z.W. Yan: Engineering Electromagnetic Analysis Technology and Example Explanation with ANSYS 10.0, China Water Conservancy and Hydropower Press, Beijing, China, 2006.
Fluent: FLUENT 6.3 User’s Guide, Fluent Inc., Lebanon, NH, 2006.
S.V. Patankar: Numerical Heat Transfer and Fluid Flow, Taylor & Francis, London, U.K., 1980.
Acknowledgments
This research has been partially supported by the National Natural Science Foundation of China (No. 50908094), the Ph.D. Programs Foundation of Ministry of Education of China (No. 20100142120071), and the Fundamental Research Funds for the Central Universities, HUST (Nos. 2012QN022 and 2013NY015).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Manuscript submitted April 12, 2013.
Rights and permissions
About this article
Cite this article
Zhou, X., Yuan, S., Liu, C. et al. Performance of Inductors Attached to a Galvanizing Bath. Metall Mater Trans B 44, 1580–1585 (2013). https://doi.org/10.1007/s11663-013-9938-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11663-013-9938-1