Abstract
All available thermodynamic and phase-diagram data have been critically evaluated and optimized for the liquid-slag phase and for all solid phases at 1 bar pressure from 298 K to above the liquidus temperatures for the systems MnO-Al2O3 and MnO-Al2O3-SiO2, and a database of model parameters has been prepared. The modified quasichemical model was employed for the molten-slag phase. Calculations using the database were performed with applications to inclusion engineering for Mn/Si killed steel.
Similar content being viewed by others
References
www.factsage.com, Montreal, 2002.
E. Jak, S. Degterov, P. Hayes, and A.D. Pelton: Can. Metall. Q., 1998, vol. 37, pp. 41–47.
E. Jak, S. Degterov, P. Wu, P. Hayes, and A.D. Pelton: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 1011–18.
S. Degterov and A.D. Pelton: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 235–42.
S. Degterov and A.D. Pelton: J. Phase Equilibria, 1996, vol. 17, pp. 476–87.
S. Degterov and A.D. Pelton: J. Phase Equilibria, 1996, vol. 17, pp. 488–94.
G. Eriksson, P. Wu, M. Blander, and A.D. Pelton: Can. Metall. Q., 1994, vol. 33, pp. 13–22.
P. Wu, G. Eriksson, and A.D. Pelton: J. Am. Ceram. Soc., 1993, vol. 76, pp. 2065–75.
P. Wu, G. Eriksson, and A.D. Pelton: J. Am. Ceram. Soc., 1993, pp. 2059–63.
G. Eriksson and A.D. Pelton: Metall. Trans. B, 1993, vol. 24B, pp. 807–816.
G. Eriksson and A.D. Pelton: Metall. Trans. B, 1993, vol. 24B, pp. 795–805.
A.D. Pelton and M. Blander: Proc. 2nd Int. Symp. on Metallurgical Slags and Fluxes, TMS-AIME, Warrendale, PA, 1984, pp. 281–91.
A.D. Pelton and M. Blander: Metall. Trans. B, 1986, vol. 17B, pp. 805–15.
A.D. Pelton and P. Chartrand: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1355–60.
A.D. Pelton, S.A. Degterov, G. Eriksson, C. Robelin, and Y. Dessureault: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 651–60.
K.T. Jacob: Can. Metall. Q., 1981, vol. 20, pp. 89–92.
W. Oelsen and G. Heynert: Arch. Eisenhuttenwes., 1955, vol. 26, pp. 567–75.
R. Hay, J. White, and A.B. McIntosh: J. West. Scot. Iron Steel Inst., 1934–35, vol. 42, pp. 99–104.
I.A. Novokhatskii, L.M. Lenev, A.A. Savinskaya, and A.V. Gorokh: Z. Neorg. Khim., 1966, vol. 11, pp. 427–28.
Y. Zhao, K. Morita, and N. Sano: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 1013–17.
L.M. Lenev and I.A. Novokhatskii: Izv. Akad. Nauk. SSSR Metally, 1966, vol. 3, pp. 73–78.
S. Dimitrov, A. Weyl, and D. Janke: Steel Res., 1995, vol. 66, pp. 87–92.
C.K. Kim and A. McLean: Metall. Trans. B, 1979, vol. 10B, pp. 575–84.
M. Timucin and A. Muan: J. Am. Ceram. Soc., 1992, vol. 75, pp. 1399–406.
I. Barin: Thermochemical Data of Pure Substances, VCH, Weinheim, Germany, 1989.
Thermicheskie Konstanty, Veshchestv (Thermal Constants of Substances), V.P. Glushko, ed., 1965, vol. 1, 1966, vol. 2, 1968, vol. 3, 1970, vol. 4, 1971, vol. 5, 1972, vol. 6 (1), 1973, vol. 6 (2), 1974, vol. 7, 1978, vol. 8, 1979, vol. 9, 1981, vol. 10; Akad. Nauk USSR, Viniti, Moscow.
R.A. Sharma and F.D. Richardson: Trans. TMS-AIME, 1965, vol. 233, pp. 1586–92.
G. Eriksson, P. Wu, and A.D. Pelton: CALPHAD J., 1993, vol. 17, pp. 189–206.
R.B. Snow: J. Am. Ceram. Soc., 1943, vol. 26, pp. 11–20.
G. Roghani, E. Jak, and P. Hayes: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 827–38.
R.G. Berman: J. Petrology, 1988, vol. 29, pp. 445–522.
T. Fujisawa and H. Sakao: Tetsu-to-Hagané, 1977, vol. 63, pp. 1504–11.
Sakao: Tetsu-to-Hagané, 1970, vol. 56, pp. S621-S624.
H. Ohta and H. Suito: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 263–70.
Y.-B. Kang and H.-G. Lee: Pohang University of Science and Technology, Pohang, 2003, unpublished work.
D.-H. Woo, Y.-B. Kang, and H.-G. Lee: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 915–20.
I.-H. Jung, S.A. Decterov and A.D. Pelton: Metall. Mater. Trans. B, in press.
T. Fujisawa and H. Sakao: Tetsu-to-Hagané, 1977, vol. 63, pp. 1494–503.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jung, IH., Kang, YB., Decterov, S.A. et al. Thermodynamic evaluation and optimization of the MnO-Al2O3 and MnO-Al2O3-SiO2 systems and applications to inclusion engineering. Metall Mater Trans B 35, 259–268 (2004). https://doi.org/10.1007/s11663-004-0027-3
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11663-004-0027-3