Abstract
A general model based on the Urbain formalism has been developed, which enables the viscosities of liquid slags to be predicted for all compositions in the Al2O3-CaO-‘FeO’-SiO2 system in equilibrium with metallic iron. Available experimental viscosity data have been analyzed and critically reviewed. The Urbain formalism has been modified to include compositional dependent model parameters. Experimental data in unaries, binaries, ternaries, and the quaternary system have been described by the model over the whole compositional and temperature ranges using one set of model parameters. This viscosity model can now be applied to various industrial slag systems.
Similar content being viewed by others
References
G. Urbain, F. Cambier, M. Deletter, and M.R. Anseau: Trans. J. Br. Ceram. Soc., 1981, vol. 80, pp. 139–41.
C.W. Bale, A.D. Pelton, and W.T. Thompson: Facility for the Analysis of Chemical Thermodynamics (F*A*C*T), Ecole Polytechnique, Montreal, 2000 (http:www.crct.polymtl.ca).
A. Kondratiev and E. Jak: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 1027–32.
J.O’M. Bockris and D.C. Lowe: Proc. R. Soc., 1954, vol. A226, pp. 423–35.
G. Hofmaier and G. Urbain: Sci. Ceram., 1968, vol. 4, pp. 25–32.
Y. Bottinga and D.F. Weill: Am. J. Sci., 1972, vol. 272, pp. 438–75.
J.D. Watt and F. Fereday: J. Inst. Fuel. 1969, vol. 42, pp. 99–103.
H.R. Shaw: Am. J. Sci., 1972, vol. 272, pp. 870–93.
G. Urbain: Steel Res., 1987, vol. 58, pp. 111–16.
G. Urbain and M. Boiret: Ironmaking and Steelmaking, 1990, vol. 17, pp. 255–60.
H.D. Weymann: Kolloid Z. Z. Polymer, 1962, vol. 181, pp. 131–37.
P.V. Riboud, Y. Roux, D. Lucas, and H. Gaye: Fachber. Huttenprax. Metallweiterverarb., 1987, vol. 19, pp. 859–69.
P. Richet and Y. Bottinga: Rev. Mineral., 1995, vol. 32, pp. 67–93.
S. Seetharaman, D. Sichen, F.-Z. Ji: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 105–09.
R.G. Reddy and J.Y. Yen: Extrac. Metall. Copper, Nickel, Cobalt, 1993, vol. 1, pp. 308–23.
L. Zhang and S. Jahanshahi: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 177–86.
L. Zhang and S. Jahanshahi: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 187–95.
K.C. Mills and S. Sridhar: Ironmaking and Steelmaking, 1999, vol. 26, pp. 262–68.
K.C. Mills, L. Chapman, A.B. Fox, and S. Sridhar: 6th Int. Conf. Slags Fluxes Molten Salts, 2000, vol. 1, pp. 1–16.
K.C. Mills: Slag Atlas, 1995, vol. 9, pp. 349–402.
P. Kozakevitch: Rev. Metall., 1960, vol. 57, pp. 149–60.
G. Hofmaier: Berg und Huttenm. Monatsh. Montan. Hochschule in Loeben, 1968, vol. 113, pp. 270–81.
V.P. Elioutin, B.C. Mitin, and Y.A. Nagibin: Fiz. Aerodispersnykh Sist., 1972, vol. 7, pp. 129–35.
R.A. Blomquist, J.K. Fink, and L. Leibowitz: Ceram. Bull., 1978, vol. 5, p. 522.
G. Urbain: Rev. Int. Haut. Temp. Refract., 1982, vol. 19, pp. 55–57.
H. Schenck, M.G. Frohberg, and W. Rohde: Arch. Eisenhuttenwes., 1961, vol. 32, pp. 521–23.
J.F. Bacon, A.A. Hasapis, and J.W. Wholley Jr.: Phys. Chem. Glasses, 1960, vol. 1, pp. 90–98.
R. Rossin, J. Bersan, and G. Urbain: Rev. Int. Haut. Temp. Refract., 1964, vol. 1, pp. 159–70.
G. Urbain, Y. Bottinga, and P. Richet: Geochim. Cosmochim. Acta, 1982, vol. 46, pp. 1061–72.
J.O’M. Bockris, J.D. MacKenzie, and J.A. Kitchener: Trans. Faraday Soc., 1955, vol. 51, pp. 1734–48.
D.W. Bowen and R.W. Taylor: Ceram. Bull., 1978, vol. 57, pp. 818–19.
R. Bruckner: Glastech. Ber., 1964, vol. 37, pp. 413–25.
T. Licko and V. Danek: Phys. Chem. Glasses, 1986, vol. 27, pp. 22–26.
P. Kozakevitch: Rev. Metall., 1949, vol. 46, pp. 505–16 and 572–82.
P. Roentgen, H. Winterhager, and L. Kammel: Z. Erz. Metall., 1956, vol. 9, pp. 207–14.
T. Myslivec, J. Wozniak, and V. Cerny: Sb. Ved. Pr. Vys. Sk. Banaske Ostrave, 1974, vol. 20, pp. 57–67.
P. Williams, M. Sunderland, and G. Briggs: Trans. Inst. Min. Metall., 1983, vol. 92C, pp. 105–09.
Y. Shiraishi, K. Ikeda, A. Tamura, and T. Saito: Trans. Jpn. Inst. Met., 1978, vol. 19, pp. 264–74.
G.H. Kaiura, J.M. Toguri, and G. Marchant: Can. Metall. Q., 1977, vol. 16, pp. 156–60.
M. Kucharski, N.M. Stubina, and J.M. Toguri: Can. Metall. Q., 1989, vol. 28, pp. 7–11.
G. Urbain: Compt. Rendus, 1951, vol. 232, pp. 330–32.
P. Roentgen, H. Winterhager, and L. Kammel: Z. Erz. Metall., 1960, vol. 13, pp. 363–73.
P.P. Evseev, L.I. Sinyukova, and A.F. Filippov: Izv. VUZ Chern. Met., 1966, vol. 9 (1), pp. 74–78.
R.B. Lobzhanidze, A.F. Fillipov, and P.P. Evseev: Izv. VUZ Chern. Met., 1970, vol. 13 (7), pp. 57–60.
D.Y. Povolotskii, V.Y. Mischenko, G.P. Vyatkin, and A.V. Puzyrev: Izv. VUZ Chern. Met., 1970, vol. 13 (12), pp. 8–12.
G. Urbain: Rev. Int. Haut. Temp. Refract., 1983, vol. 20, pp. 135–39.
G.I. Zhmoidin and I.S. Kulikov: Izv. Akad. Nauk SSSR Metally, 1965 (2), pp. 42–52.
V.M. Lopatin, Y.P. Nikitin, L.N. Barmin, and I.B. Bobylev: Fiz. Khim. Issled. Metall. Protsessov, 1975, vol. 3, pp. 63–66.
A.F. Kurochkin, A.V. Pavlov, and A.N. Kuyatkovskii: Kompleksn. Ispol. Miner. Syr’ya, 1983, No. 12, pp. 33–36.
L.N. Sheludyakov, E.T. Sarancha, and A.A. Vakhitov: Tr. Inst. Khim. Nauk Akad. Nauk Kaz. SSR, 1967, vol. 15, pp. 158–64.
C.M. Scarfe, D.J. Cronin, J.T. Wenzel, and D.A. Kauffman: Am. Miner., 1983, vol. 68, pp. 1083–88.
J.S. Machin and T.B. Yee: J. Am. Ceram. Soc., 1948, vol. 31, pp. 200–04.
H.J. Hurst: CSIRO DET, Sydney, private communication, 1999.
P.M. Bills: J. Iron Steel Inst., 1963, vol. 201, pp. 133–40.
M. Kato and S. Minowa: Trans. Iron Steel Inst. Jpn., 1969, vol. 9, pp. 31–38.
F. Johannsen and H. Brunion: Z. Erz. Metal., 1959, vol. 12, pp. 211–19.
F. Johannsen and W. Weize: Z. Erz. Metal., 1958, vol. 11, pp. 1–15.
F. Ji, D. Sichen, and S. Seetharaman: 5th Int. Conf. Molten Slags, Fluxes and Salts, Iron and Steel Society, Sydney, Australia, 1997, pp. 519–34.
A.A. Gimmelfarb: Izv. Akad. Nauk SSSR Metally, 1968, No. 2, pp. 59–70.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kondratiev, A., Jak, E. Review of experimental data and modeling of the viscosities of fully liquid slags in the Al2O3-CaO-‘FeO’-SiO2 system. Metall Mater Trans B 32, 1015–1025 (2001). https://doi.org/10.1007/s11663-001-0090-y
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11663-001-0090-y