References
M.C. Flemings: Metall. Trans. B, 1991, vol. 22B, pp. 269–70.
H.K. Jung and C.G. Kang: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2967–77.
H.K. Jung and C.G. Kang: Key Eng. Mater., 2000, vols. 177–80, pp. 571–76.
A. Zavaliangos: Int. J. Mech. Sci., 1998, vol. 40 (10), pp. 1029–41.
C.G. Kang and H.K. Jung: Int. J. Mech. Sci., 1999, vol. 41 (12), pp. 1423–45.
H.K. Jung, C.G. Kang, and Y.H. Moon: J. Mater. Eng. Performance, 2000, vol. 9 (1), pp. 12–23.
G. Hirt, R. Cremer, A. Winkelmann, T. Witulski, and M. Zillgen: J. Mater. Processing Technol., 1994, vol. 45, pp. 359–64.
H.K. Jung and C.G. Kang: Proc. 8th Int. Symp. on Plasticity and Its Current Applications (PLASTICITY2000), Whistler Resort, Vancouver, July 2000, A.S. Khan, ed., Whistler Resort, Vancouver, 2000, pp. 237–39.
H.K. Jung and C.G. Kang: Proc. 8th Int. Symp. on Plasticity and Its Current Applications (PLASTICITY2000), Whistler Resort, Vancouver, July 2000, A.S. Khan, ed., Whistler Resort, Vancouver, 2000, pp. 240–42.
C.G. Kang and H.K. Jung: J. Mater. Eng. Performance, 2000, vol. 9 (5), pp. 530–35.
H.K. Jung and C.G. Kang: Proc. 5th Asia-Pacific Symp. on Advances in Engineering Plasticity and Its Applications (AEPA2000), Hong Kong, June 2000, T.X. Yu, ed., Hong Kong University of Science and Technology, Hong Kong, 2000, pp. 571–76.
D.B. Spencer: Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1971, pp. 1–50.
D.B. Spencer, R. Mehrabian, and M.C. Flemings: Metall. Trans. A, 1972, vol. 3A, pp. 1925–32.
M.C. Flemings: Proc. 6th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Turin, Italy, Sept. 2000, M. Rosso and G. Chiarmetta, eds., Unione Industriale di Torino, Turin, 2000, pp. 11–4.
R. Mehrabian and M.C. Flemings: Trans. AFS, Die Casting Eng., 1973, vol. 80, pp. 173–82.
M. Garat, S. Blais, C. Pluchon, and W.R. Loué: Proc. 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Golden, CO, June 1998, A.K. Bhasin, J.J. Moore, K.P. Young, and S. Midson, eds., Colorado School of Mines, Golden, CO, 1998, pp. xvii-xxxi.
M. Zillgen and G. Hirt: Proc. 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Sheffield, United Kingdom, June 1996, D.H. Kirkwood and P. Kapranos, eds., The University of Sheffield, Sheffield, 1996, pp. 180–86.
C.G. Kang, H.K. Jung, and Y.J. Jung: Adv. Technol. Plasticity, 1999, vol. 3, pp. 1689–94.
K.P. Young and R. Fitze: Proc. 3rd Int. Conf. on Semi-Solid Processing of Alloys and Composites, Tokyo, June 1994, M. Kiuchi, ed., Tokyo University, Tokyo, 1994, pp. 155–77.
W. Kahrmann, R. Schragner, and K. Young: Proc. 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Sheffield, United Kingdom, June 1996, D.H. Kirkwood and P. Kapranos, eds., The University of Sheffield, Sheffield, 1996, pp. 154–58.
D.H. Kirkwood: Int. Mater. Rev., 1994, vol. 39 (5), pp. 173–89.
P. Kapranos, R.C. Gibson, D.H. Kirkwood, and C.M. Sellars: Proc. 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Sheffield, United Kingdom, June 1996, D.H. Kirkwood and P. Kapranos, eds. The University of Sheffield, Sheffield, 1996, pp. 148–52.
C.G. Kang, S.S. Kang, and H.K. Jung: Adv. Technol. Plasticity, 1999, vol. 3, pp. 1701–06.
H.K. Jung and C.G. Kang: Key Eng. Mater., 2000, vols. 177–180, pp. 565–70.
H.K. Jung and C.G. Kang: J. Mater. Processing Technol., 2000, vol. 104 (3), pp. 244–53.
C.G. Kang, H.K. Jung, and K.W. Jung: Proc. Int. Symp. on Advanced Forming and Die Manufacturing Technology (AFDM’99), Haeundae, Pusan, Korea, Sept. 1999, C.G. Kang and Y.H. Moon, eds., Engineering Research Center for Net Shape and Die Manufacturing, Pusan National University, Pusan, 1999, pp. 83–88.
E. Tzimas and A. Zavaliangos: Acta Mater., 1999, vol. 47 (2), pp. 517–28.
C.G. Kang, N.S. Kim, and H.K. Jung: Proc. 6th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Turin, Italy, Sept. 2000, M. Rosso and G. Chiarmetta, eds., Unione Industriale di Torino, Turin, 2000, pp. 801–06.
Metals Handbook: Properties and Selection: Nonferrous Alloys and Special Purpose Materials, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2, pp. 100–300.
V.I. Rudnev, L.C. Raymond, D.L. Loveless, and M.R. Black: Induction Heat Treatment, Marcel Dekker Inc., New York, NY, 1997, pp. 775–911.
C.G. Kang and H.K. Jung: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 119–27.
C.G. Kang, K.D. Jung, and H.K. Jung: Proc. 2nd Int. Conf. on Intelligent Processing and Manufacturing of Materials (IPMM ’99), Honolulu, HI, July 1999, J.A. Meech, M.M. Veiga, M.H. Smith, and S.R. LeClair, eds., West Coast Reproduction Centers, Vancouver, 1999, pp. 593–99.
C.G. Kang, H.K. Jung, K.D. Jung, and D.H. Lee: Proc. Korea-French Int. Joint Workshop on Metal Forming, KAIST (Korea Advanced Institute of Science and Technology), Daejon, Korea, Aug. 1999, D.Y. Yang and J.L. Chenot, eds., KAIST Daejon, 1999, pp. 51–56.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kang, C.G., Jung, H.K. Semisolid forming process—numerical simulation and experimental study. Metall Mater Trans B 32, 363–371 (2001). https://doi.org/10.1007/s11663-001-0059-x
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11663-001-0059-x