Abstract
In situ dynamic observation of the progress of a peritectic reaction and transformation of Fe-(0.14 pct C)- and Fe-(0.42 pct C)-peritectic Fe-C alloys has been successfully made with a combination of a confocal scanning laser microscope and an infrared image furnace. The peritectic reaction is characterized by the formation of the γ-austenite phase at the junction of the liquid and the grain boundary of δ-ferrite crystals and subsequent propagation of the three-phase point, liquid/γ/δ, along the liquid/δ boundary, whereas the peritectic transformation occurs by the thickening of the intervening γ toward both the liquid side and the δ side. The rates of the peritectic reaction for the two peritectic alloys are found to be much faster than the rate that would be controlled by carbon diffusion, suggesting that either massive transformation to γ or solidification as γ controls the rate. This is also the case for the Fe-0.14%C transformation in the hypoperitectic alloy. However, the rate of the peritectic transformation in the Fe-0.42%C alloy is determined by carbon diffusion.
Similar content being viewed by others
References
H. Fredriksson: Scand. J. Metall., 1976, vol. 5, pp. 27–32.
T. Saeki, S. Ohguchi, T. Yamamoto, H. Misumi, and S. Tsuneoka: Tetsu-to-Hagané, 1982, vol. 68, pp. 1773–81.
S.N. Singh and K.E. Blazek: J. Met., 1974, vol. 26 (10), pp. 17–27.
A. Grill and J.K. Brimacombe: Ironmaking and Steelmaking, 1976, vol. 3 (2), pp. 76–79.
Y. Sugitani and M. Nakamura: Tetsu-to-Hagané, 1979, vol. 65, pp. 1702–11.
H.W. Kerr, J. Cisse, and G.F. Bolling: Acta Metall., 1974, vol. 22, pp. 677–86.
H. Fredriksson: Met. Sci., 1976, vol. 10, pp. 76–86.
M. Hillert: Solidification and Casting of Metals, The Metals Society, London, 1979.
D.H. St. John: Acta Metall., 1990, vol. 38, pp. 631–36.
H. Fredriksson and T. Nylen: Met. Sci., 1982, vol. 16, pp. 283–94.
Y.K. Chuang, D. Reinisch, and K. Schwerdtfeger: Metall. Trans. A, 1975, vol. 6A, pp. 235–38.
H. Fredriksson and J. Stjerndahl: Met. Sci., 1982, vol. 16, pp. 575–85.
Y. Ueshima, S. Mizoguchi, T. Matsumiya, and H. Kajioka: Metall. Trans. B, 1986, vol. 17B, pp. 845–59.
K. Matsuura, Y. Itoh, and T. Narita: Iron Steel Inst. Jpn. Int., 1993, vol. 33, pp. 583–87.
T. Takahashi, K. Ohsasa, and J. Tanaka: Tetsu-to-Hagané, 1987, vol. 73, pp. 99–106.
H. Chikama, H. Shibata, T. Emi, and M. Suzuki: Mater. Trans. JIM., 1996, vol. 37, pp. 620–26.
H. Yin, T. Emi, and H. Shibata: Acta Mater., 1999, vol. 47 (5), pp. 1523–35.
W.P. Bosze and R. Trivedi: Metall. Trans., 1974, vol. 5, pp. 511–12.
M. Kudoh, K. Osasa, and Y. Gao: Proc. 6th Int. Iron and Steel Congress, Nagoya, Japan, Iron and Steel Institute of Japan, Tokyo, 1990, pp. 697–704.
Author information
Authors and Affiliations
Additional information
This article is based on a presentation made in the “Geoffrey Belton Memorial Symposium,” held in January 2000, in Sydney, Australia, under the joint sponsorship of ISS and TMS.
Rights and permissions
About this article
Cite this article
Shibata, H., Arai, Y., Suzuki, M. et al. Kinetics of peritectic reaction and transformation in Fe-C alloys. Metall Mater Trans B 31, 981–991 (2000). https://doi.org/10.1007/s11663-000-0074-3
Issue Date:
DOI: https://doi.org/10.1007/s11663-000-0074-3