Abstract
The distribution of the dendrite arrays and the primary dendrite arm spacing (PDAS) in large-sized single-crystal superalloy blade was investigated by Voronoi tessellation. The dendrite arrays were hexagonal at the airfoil center and random at the trailing edge. The PDAS was gradually increased from the leading edge (about 370 μm) to the trailing edge (about 500 μm). With the solidification distance increasing, the PDAS in large-sized blade was decreased (about 380 μm) at the middle blade.
References
R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006, pp. 19–21.
J. Strickland, B. Nenchev, and H. Dong: Crystals, 2020, vol. 10, pp. 627–56.
A.I. Epishin and I.L. Svetlov: Inorg. Mater. Appl. Res., 2016, vol. 7, pp. 45–52.
J.W. Aveson, P.A. Tennant, B.J. Foss, B.A. Shollock, H.J. Stone, and N. D’Souza: Acta Mater., 2013, vol. 61, pp. 5162–71.
D. Ma, F. Wang, Q. Wu, S. Bogner, and A. B. Polaczek, In 13th International Symposium on Superalloys, Seven Springs, PA, 2016, pp. 237–46.
J. Strickland, B. Nenchev, K. Tassenberg, S. Perry, G. Sheppard, H.B. Dong, R.Y. Zhang, G. Burca, and N. D’Souza: Acta Mater., 2021, vol. 217, pp. 117180–96.
G. Xie, S.H. Zhang, W. Zheng, G. Zhang, J. Shen, Y.Z. Lu, H.Q. Hao, L. Wang, L.H. Lou, and J. Zhang: Acta Metall. Sin., 2019, vol. 55, pp. 1527–36.
T. Lamm and C. Singer: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1177–83.
D.G. Mccartney and J.D. Hunt: Acta Metall., 1981, vol. 29, pp. 1851–63.
C.L. Brundidge, J.D. Miller, and T.M. Pollock: Metall. Mater. Trans. A, 2011, vol. 42, pp. 2723–32.
T. Takaki, S. Sakane, M. Ohno, Y. Shibuta, T. Shimokawabe, and T. Aoki: Acta Mater., 2016, vol. 118, pp. 230–43.
K. Tassenberg, B. Nenchev, J. Strickland, S. Perry, and D. Weston: Mater. Charact., 2021, vol. 171, pp. 110763–73.
W.H. Wan, D.L. Li, H.Z. Wang, L. Zhao, X.J. Shen, D.D. Sun, J.Y. Chen, and C.B. Xiao: Crystals, 2021, vol. 11, pp. 1060–75.
F. Wang, Z.N. Wu, D.X. Ma, and A. Buhrig-Polaczek: Adv. Eng. Mater., 2017, vol. 19, pp. 1700297–1700304.
S.N. Tewari, Y.H.S. Weng, G.L. Ding, and R. Trivedi: Metall. Mater. Trans. A, 2002, vol. 33, pp. 1229–43.
J. Hui, R. Tiwari, X. Wu, S.N. Tewari, and R. Trivedi: Metall. Mater. Trans. A, 2002, vol. 33, pp. 3499–510.
M. Huo, L. Liu, W.C. Yang, D.J. Sun, S.S. Hu, J. Zhang, and H.Z. Fu: Adv. Eng. Mater., 2018, vol. 20, pp. 1701189–95.
N. Wang, L. Liu, S.F. Gao, X.B. Zhao, T.W. Huang, J. Zhang, and H.Z. Fu: J. Alloys Compd., 2014, vol. 586, pp. 220–29.
X.L. Zhang, T.Z. Xin, S.S. Yue, X.B. Meng, and G.Q. Liu: Mater. Tehnol., 2021, vol. 55, pp. 149–53.
J. Strickland, B. Nenchev, S. Perry, K. Tassenberg, S. Gill, C. Panwisawas, H.B. Dong, N. D’Souza, and S. Irwin: Acta Mater., 2020, vol. 200, pp. 417–31.
J.D. Hunt and S.Z. Lu: Metall. Mater. Trans. A, 1996, vol. 27, pp. 611–23.
R. Trivedi: Metall. Mater. Trans. A, 1984, vol. 15, pp. 977–82.
W. Kurz and D.J. Fisher: Acta Metall., 1981, vol. 29, pp. 11–20.
F. Sadeghi, A. Kermanpur, D. Heydari, and M. Bahmani: Cryst. Res. Technol., 2017, vol. 52, pp. 170012–19.
Acknowledgments
The authors are grateful for the financial support by the Jiangsu Science and Technology Funding (Key R&D industry foresight and key technologies) under Grant BE2022124, National Natural Science Foundation of China (52071267, 51631008, 51771148, 51690163), National Key Research and Development Program (2016YFB0701400), National Science and Technology Major Project (2017-VI-0001-0070), and Natural Science Foundation of Shaanxi Province (2020JM-122).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of Interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Zhang, C., Huang, T., Zhang, Z. et al. Uniformity of the Dendritic Microstructure in Large-Sized Single-Crystal Superalloy Blades. Metall Mater Trans A 54, 2507–2511 (2023). https://doi.org/10.1007/s11661-023-06963-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-023-06963-8