Avoid common mistakes on your manuscript.
1 Correction to: METALLURGICAL AND MATERIALS TRANSACTIONS A https://doi.org/10.1007/s11661-020-06040-4
The following is missing from the Acknowledgments in the original article:
Access to the Oak Ridge National Laboratory’s (ORNL) additive manufacturing equipment at ORNL’s Manufacturing Demonstration Facility (MDF) was facilitated by US Department of Energy’s Strategic Partnership Projects (SPP) mechanism. More information can be found at https://science.energy.gov/lp/strategic-partnership-projects. Research sponsored by the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Industrial Technologies Program, under contract DE-AC05-00OR22725 with UT-Battelle, LLC.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Quintana, M.J., Kenney, M.J., Agrawal, P. et al. Correction to: Texture Analysis of Additively Manufactured Ti-6Al-4V Deposited Using Different Scanning Strategies. Metall Mater Trans A 52, 438 (2021). https://doi.org/10.1007/s11661-020-06082-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-020-06082-8