Abstract
The development of processing maps using the dynamic materials modeling (DMM) approach is a widely used method for choosing the appropriate process parameters for the thermomechanical processing of any material. This paper highlights the correct algorithm for developing the processing map by calculating the metallurgical power dissipation efficiency (η) and the newly proposed binary instability parameter (β). Further, common errors that can arise during the computations, and their consequences are also highlighted.
References
Y. V. R. K. Prasad, H. L. Gegel, S. M. Doraivelu, J. C. Malas, J. T. Morgan, K. A. Lark, and D. R. Barker: Metall. Trans. A, 1984, vol. 15A, pp. 1883-1892.
H. Zeigler: Progress in Solid Mechanics, Wiley, New York, 1963, pp. 93-113.
P. E. Wellstead: Introduction to Physical Systems Modelling, Academic Press, London, 1979, pp. 9-22.
L. E. Malvern: Introduction to the Mechanics of a Continuous Medium, Prentice-Hall, Eaglewood Cliffs, NJ, 1969, pp. 197-271.
C. Truesdell and W. Noll: in The Non-linear Field Theories of Mechanics (eds) S. S. Antman, ed., 3rd edn., Springer, Berlin, 2004, pp. 294–96.
Y. V. R. K. Prasad: Metall. Mater. Trans. A, 1996, vol. 27(1), pp. 235-236.
Y. V. R. K. Prasad, K. P. Rao, and S. Sasidhar: Hot Working Guide: A Compendium of Processing Maps, ASM International, Materials Park, OH, 2015, pp. 1-29.
Zhiye Huang, Xingxing Zhang, Bolyu Xiao, and Zongyi Ma: J. Alloys Compd., 2017, vol. 722, pp. 145-157.
S. V. S. Narayana-Murty, M. S. Sarma, and B. Nageswara-Rao: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1581-1582.
S. V. S. Narayana-Murty, B. Nageswara-Rao, and B. P. Kashyap: Int. Mater. Rev., 2000, vol. 45, pp. 15-26.
A.K.S. Kalyan Kumar, MSc (Eng) thesis, Indian Institute of Science, Bangalore, India, 1987.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Manuscript submitted December 30, 2019.
Rights and permissions
About this article
Cite this article
Neethu, N., Chakravarthy, P. Development of Processing Maps for Hot Deformation: Algorithm and Common Errors. Metall Mater Trans A 51, 3398–3402 (2020). https://doi.org/10.1007/s11661-020-05817-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-020-05817-x