Avoid common mistakes on your manuscript.
1 Correction to: Metallurgical and Materials Transactions A, Volume 50A, October 2019 https://doi.org/10.1007/s11661-019-05381-z
The article “Advancement in the Pressureless Sintering of CP Titanium Using High-Frequency Induction Heating”, written by Stella Raynova, Yan Collas, Fei Yang, and Leandro Bolzoni was originally published Online First without Open Access. After publication in volume 50A, issue 10, page 4732 the author decided to opt for Open Choice and to make the article an Open Access publication. Therefore, the copyright of the article has been changed to © The Author(s) 2019 and the article is forthwith distributed under the terms of the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/), which permits use, duplication, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Raynova, S., Collas, Y., Yang, F. et al. Correction to: Advancement in the Pressureless Sintering of CP Titanium Using High-Frequency Induction Heating. Metall Mater Trans A 51, 1439 (2020). https://doi.org/10.1007/s11661-019-05586-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-019-05586-2