Abstract
A novel process of discrete surface abrasion during simple torsion (ST), named “surface abrasive torsion (SAT),” is proposed to overcome the limitation of ST, i.e., insufficient strain for severe plastic deformation (SPD) due to cracks initiated on the surface, by removing the roughened surface region. The effect of SAT on delayed crack initiation was explained using finite element simulations. Larger shear deformation applicable to the specimen in SAT than ST was demonstrated experimentally.
References
Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev, and Y. Zhu: Acta Mater., 2004, vol. 52, pp. 4589–99.
H.S. Kim, M.H. Seo, and S.I. Hong: J. Mater. Process. Technol., 2001, vol. 113, pp. 622–26.
K. Lu: Science, 2014, vol. 345, pp. 1455–56.
H.W. Zhang, Z.K. Hei, G. Liu, and K. Lu: Acta Mater., 2003, vol. 51, pp. 1871–81.
J. Moering, X. Ma, G. Chen, P. Miao, G. Li, G. Qian, S. Mathaudhu, and Y. Zhu: Scripta Mater., 2015, vol. 108, pp. 100–03.
X. Wu, P. Jiang, L. Chen, F. Yuan, and T. Zhu: Proc. Nat. Acad. Sci. USA, 2014, vol. 111, pp. 7197–7201.
M. Yang, Y. Pan, F. Yuan, Y. Zhu, and X. Xu: Mater. Res. Lett., 2016, vol. 4, pp. 145–51.
N. Guo, B. Song, H. Yu, R. Xin, B. Wang, and T. Liu: Mater. Des., 2016, vol. 90, pp. 545–50.
N. Guo, B. Song, C. Guo, R. Xin, and Q. Liu: Mater. Des., 2015, vol. 83, pp. 270–75.
Q. Huo, Z. Xiao, X. Yang, D. Ando, Y. Sutou, and J. Koike: Mater. Sci. Eng. A, 2017, vol. 696, pp. 52–59.
H. Chen, F. Li, J. Liu, J. Li, X. Ma, and Q. Wan: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2396–2409.
N. Guo, Z. Zhang, Q. Dong, H. Yu, B. Song, L. Chai, C. Liu, Z. Wao, and M. Daymond: Mater. Des., 2018, vol. 142, pp. 150–59.
J. Wang, D. Zhang, Y. Li, Z. Xiao, J. Fouse, and X. Yang: Mater. Des., 2015, vol. 86, pp. 526–35.
R. Becker: Acta Mater., 1998, vol. 46, pp. 1385–1401.
J.W. Bae, H.Y. Um, S.H. Lee, B.J. Min, S.Y. Kim, J.S. Chung, K.S. Park, M.H. Seo, and H.S. Kim: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 1021–32.
H. Proudhon, S. Fouvry, and J.Y. Buffiere: Int. J. Fatigue, 2005, vol. 27, pp. 569–79.
B. Ma and C. Laird: Acta Metall., 1989, vol. 37, pp. 325–36.
L. Xue: Int. J. Sol. Struct., 2007, vol. 44, pp. 5163–81.
T. Hanamura, F. Yin, and K. Nagai: ISIJ Int., 2004, vol. 44, pp. 610–17.
H.S. Kim and S.I. Hong: Acta Mater., 1999, vol. 47, pp. 2059–66.
V.S. Ivanova and V.M. Plastinin: Strength Mater., 1980, vol. 12, pp. 163–66.
X. Bian, F. Yuan, Y. Zhu, and X. Wu: Mater. Res. Lett., 2017, vol. 5, pp. 501–07.
L. Chen, E. Wu, F. Yin, and J. Li: J. Univ. Sci. Technol. Beijing, 2006, vol. 13, pp. 363–67.
This work was supported by a National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIP) (Grant No. 2017R1A2A1A17069427).
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted January 1, 2018.
Rights and permissions
About this article
Cite this article
Moon, J.H., Baek, S.M., Lee, S.G. et al. Surface Abrasive Torsion for Improved Mechanical Properties and Microstructure. Metall Mater Trans A 49, 3151–3156 (2018). https://doi.org/10.1007/s11661-018-4666-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-018-4666-4