Advertisement

Metallurgical and Materials Transactions A

, Volume 49, Issue 5, pp 1481–1485 | Cite as

On the Effect of Liquid-State Diffusion on Isothermal Solidification Completion Time During Transient Liquid-Phase Bonding of Dissimilar Materials

  • O. A. Ojo
  • O. Aina
Communication
  • 184 Downloads

Abstract

A study of transient liquid-phase bonding (TLPB) of dissimilar materials consisting of a nickel-based superalloy and a cobalt material is performed. In contrast to the assumption that rapid atomic diffusion in the liquid would reduce the processing time, tf, required to completely eliminate the liquid phase from the joint region through diffusional solidification, the occurrence of liquid-state diffusion significantly prolonged the processing time tf. This finding is crucially important to the TLPB of dissimilar materials.

Notes

The authors gratefully acknowledge the financial support from the NSERC of Canada.

References

  1. 1.
    D. S. Duvall, W. A. Owczarski and D. F. Paulonis, Weld J., vol 53, pp. 203 - 214, 1974Google Scholar
  2. 2.
    M. S. Park, S. L. Gibbon and R. Arroyave, Acta Mater. vol. 60, pp. 6278-6287, 2012.CrossRefGoogle Scholar
  3. 3.
    N. S. Bosco and F. W. Zok, Acta Mater. vol. 52, pp. 2965-2972, 2004.CrossRefGoogle Scholar
  4. 4.
    R. Zhongci, W. Shuncai and Z. Yunrong, Scripta Mater. vol. 34, pp. 163-168, 1996CrossRefGoogle Scholar
  5. 5.
    D. M. Turiff, S. F. Corbin, M. Kozdras, Acta Mater. vol. 58, pp. 1332-1341,2010CrossRefGoogle Scholar
  6. 6.
    I. Tuah-Poku, M. Dollar, and T. B. Massalski,, Metall. Trans. A, 1988, Vol. 19A, pp. 675 – 686.CrossRefGoogle Scholar
  7. 7.
    Y. Zhou, W. F. Gale and T. H. North, Intern. Mater. Rev. vol. 40 pp 181 – 196, 1995CrossRefGoogle Scholar
  8. 8.
    H. Nakagawa, C. H. Lee, and T. H. North, Metallurgical Trans. 1991, 22A, 543-555.CrossRefGoogle Scholar
  9. 9.
    O. A. Ojo, O. A. Olatunji and M. C. Chaturvedi, Philosophical Magazine Letters, 2017,  https://doi.org/10.1080/09500839.2017.1396373 Google Scholar
  10. 10.
    A. Ghoneim and O. A. Ojo, Metall. & Mater. Trans. A, vol. 43 pp. 900-911, 2012CrossRefGoogle Scholar
  11. 11.
    M. Khakian, S. Nategh and S. Mirdamadi, Journal of Alloys and Compounds vol. 653, pp. 386-394, 2015CrossRefGoogle Scholar
  12. 12.
    X. Wu, R. S. Chandel and H. Li, Journal of Mater. Sci. vol. 36, pp. 1539-1546, 2001CrossRefGoogle Scholar
  13. 13.
    L. X. Zhang, Z. Sun, Q. Xue, M. Lei and X. Y. Tian, Materials and Design vol. 90, pp. 949-957, 2016CrossRefGoogle Scholar
  14. 14.
    B. A. Khazael, G. Asghari, R. Bakhtiari, Trans. Nonferrous Metals Soci. China, vol. 24, pp. 996-1003, 2014CrossRefGoogle Scholar
  15. 15.
    J. D. Liu, T. Jin, N. R. Zhao, Z. H. Wang, X. F. Su, H. R. Guan and Z. Q. Hu, Sci Technol. Weld. Join. vol. 15, pp. 194-198, 2010CrossRefGoogle Scholar
  16. 16.
    A. G. Bigvand and O. A. Ojo, Metall. Mater. Trans. Vol 45, pp 1670-1674, 2014CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2018

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringUniversity of ManitobaWinnipegCanada

Personalised recommendations