1 Erratum to: METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 47A, SEPTEMBER 2016, pp. 4467–4475 DOI: 10.1007/s11661-016-3612-6
In the original article HIP316L-A and HIP316L-B have incorrect N concentrations stated in Table I. The correct N concentration for HIP316L-A is 1400 ppm; the correct N concentration for HIP316L-B is 1000 ppm.
These nitrogen concentrations are not discussed elsewhere in the paper, and thus no other revisions are necessary.
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found under doi:10.1007/s11661-016-3612-6.
Rights and permissions
About this article
Cite this article
Cooper, A.J., Cooper, N.I., Dhers, J. et al. Erratum to: Effect of Oxygen Content Upon the Microstructural and Mechanical Properties of Type 316L Austenitic Stainless Steel Manufactured by Hot Isostatic Pressing. Metall Mater Trans A 48, 3941 (2017). https://doi.org/10.1007/s11661-017-4149-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-017-4149-z