Abstract
β-Ti alloys with low Young’s modulus are always formed at the lower critical limit of β stabilization, where the β structure is prone to be destabilized. This present work aims at studying the structural stability of β-Ti alloy [(Mo0.5Sn0.5)-(Ti13Zr1)]Nb1 with low Young’s modulus (E) at different states of suction-cast (SC) and solution-treated (ST), and the deformation mechanisms of this alloy are also discussed. The solution treatment eliminates the composition heterogeneity of the SC alloy, and no second phases are precipitated from the β matrix, as a result of a further decrease of E from 48 GPa (SC) to 43 GPa (ST). After tension deformation, the stress-induced {112}\( \langle 111\rangle \) β twinning is dominant in the SC alloy, while the stress-induced phase transformation of β → α″ plays a decisive role in the ST alloy, which results from the different structural stabilities of β matrix at different states. The minor second-phase precipitation renders the matrix with a slightly higher β stability of the SC alloy than that of the ST one.
Similar content being viewed by others
References
M. Abdel-Hady, K. Hinoshita, and M. Morinaga: Scripta Mater., 2006, vol. 55, pp. 477–80.
M. Nakai, M. Niinomi, X. Zhao, and X. Zhao: Mater. Lett., 2011, vol. 65, pp. 688–90.
T. Saito, T. Furuta, J.-H. Hwang, S. Kuramoto, K. Nishino, N. Suzuki, R. Chen, A. Yamada, K. Ito, and Y. Seno: Science, 2003, vol. 300, pp. 464–67.
M. Niinomi: Mater. Sci. Eng. A, 1998, vol. 243, pp. 231–36.
M. Long and H. Rack: Biomaterials, 1998, vol. 19, pp. 1621–39.
Y. Hao, S. Li, S. Sun, C. Zheng, and R. Yang: Acta Biomater., 2007, vol. 3, pp. 277–86.
K.K. Wang, L.J. Gustavson, and J.H. Dumbleton: Medical Applications of Titanium and Its Alloys: The Material and Biological Issues, ASTM International, West Conshohocken, PA, 1996.
R. Davis, H. Flower, and D. West: J. Mater. Sci., 1979, vol. 14, pp. 712–22.
Y.L. Hao, R. Yang, M. Niinomi, D. Kuroda, Y.L. Zhou, K. Fukunaga, and A. Suzuki: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3137–44.
Y. Lee and G. Welsch: Mater. Sci. Eng. A, 1990, vol. 128, pp. 77–89.
B. Hickman: J. Mater. Sci., 1969, vol. 4, pp. 554–63.
W. Ho: J. Med. Biol. Eng., 2008, vol. 28, pp. 47–51.
Z. Fan and A. Miodownik: J. Mater. Sci., 1994, vol. 29, pp. 6403–12.
S. Hanada and O. Izumi: Metall. Trans. A, 1987, vol. 18A, pp. 265–71.
R. Talling, R. Dashwood, M. Jackson, and D. Dye: Acta Mater., 2009, vol. 57, pp. 1188–98.
N. Sakaguchi, M. Niinomi, T. Akahori, J. Takeda, and H. Toda: Mater. Sci. Eng. C, 2005, vol. 25, pp. 370–76.
N. Sakaguch, M. Niinomi, and T. Akahori: Mater. Trans., 2004, vol. 45, pp. 1113–19.
M. Ahmed, D. Wexler, G. Casillas, O.M. Ivasishin, and E.V. Pereloma: Acta Mater., 2015, vol. 84, pp. 124–35.
T. Grosdidier and M.-J. Philippe: Mater. Sci. Eng. A, 2000, vol. 291, pp. 218–23.
D. Banerjee and J.C. Williams: Acta Mater., 2013, vol. 61, pp. 844–79.
C. Brozek, F. Sun, P. Vermaut, Y. Millet, A. Lenain, D. Embury, P. Jacques, and F. Prima: Scripta Mater., 2016, vol. 114, pp. 60–64.
S. Kuramoto, T. Furuta, J. Hwang, K. Nishino, and T. Saito: Mater. Sci. Eng. A, 2006, vol. 442, pp. 454–57.
Q. Li, M. Niinomi, M. Nakai, Z. Cui, S. Zhu, and X. Yang: Mater. Sci. Eng. A, 2012, vol. 536, pp. 197–206.
M. Hida, E. Sukedai, C. Henmi, K. Sakaue, and H. Terauchi: Acta Metall., 1982, vol. 30, pp. 1471–79.
Y. Yang, G. Li, G. Cheng, H. Wang, M. Zhang, F. Xu, and K. Yang: Scripta Mater., 2008, vol. 58, pp. 9–12.
F. Sun, J. Zhang, M. Marteleur, T. Gloriant, P. Vermaut, D. Laillé, P. Castany, C. Curfs, P. Jacques, and F. Prima: Acta Mater., 2013, vol. 61, pp. 6406–17.
H. Matsumoto, S. Watanabe, and S. Hanada: Metall. Mater. Trans. A, 2005, vol. 46A, pp. 1070–78.
S. Hanada, N. Masahashi, and T.K. Jung: Mater. Sci. Eng. A, 2013, vol. 588, pp. 403–10.
R.P. Kolli, W.J. Joost, and S. Ankem: JOM, 2015, vol. 67, pp. 1273–80.
Q. Wang, C. Ji, Y. Wang, J. Qiang, and C. Dong: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1872–79.
C. Pang, B. Jiang, Y. Shi, Q. Wang, and C. Dong: J. Alloys Compd., 2015, vol. 652, pp. 63–69.
A. Takeuchi and A. Inoue: Mater. Trans., 2005, vol. 46, pp. 2817–29.
Q. Wang, C. Dong, and P.K. Liaw: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3440–47.
B.B. Jiang, Q. Wang, D.H. Wen, F. Xu, G.Q. Chen, C. Dong, L.X. Sun, and P K. Liaw: Mater. Sci. Eng. A, 2017, vol. 687, pp. 1–7.
S. Li, T. Cui, Y. Hao, and R. Yang: Acta Biomater., 2008, vol. 4, pp. 305–17.
D. Ping, Y. Mitarai, and F. Yin: Scripta Mater., 2005, vol. 52, pp. 1287–91.
Y. Hao, S. Li, S. Sun, and R. Yang: Mater. Sci. Eng. A, 2006, vol. 441, pp. 112–18.
W.Q. Song, S. Sun, S. Zhu, G. Wang, J. Wang, and M.S. Dargusch: Mater. Des., 2012, vol. 34, pp. 739–45.
Q. Wang, Q. Li, X. Li, R. Zhang, X. Gao, C. Dong, and P.K. Liaw: Metall. Mater. Trans. A, 2005, vol. 46A, pp. 3924–31.
P. Laheurte, A. Eberhardt, and M.-J. Philippe: Mater. Sci. Eng. A, 2005, vol. 396, pp. 223–30.
D.L. Moffat and D.C. Larbalestier: Metall. Trans. A, 1988, vol. 19A, pp. 1677–86.
T. Ahmed and H.J. Rack: Mater. Sci. Eng. A, 1998, vol. 243, pp. 206–11
T. Li, D. Kent, G. Sha, L.T. Stephenson, A.V. Ceguerra, S.P. Ringer, M.S. Dargusch, and J.M. Cairney: Acta Mater., 2016, vol. 106, pp. 353–66.
A. Devaraj, S. Nag, R. Srinivasan, R.E.A. Williams, S. Banerjee, R. Banerjee, and H.L. Fraser: Acta Mater., 2012, vol. 60, pp. 596–609.
S. Guo, Q. Meng, X. Zhao, Q. Wei, and H. Xu: Sci. Rep., 2014. doi:10.1038/srep14688.
F. Sun, J. Zhang, M. Marteleur, C. Brozek, E. Rauch, M. Veron, P. Vermaut, P. Jacques, and F. Prima: Scripta Mater., 2015, vol. 94, pp. 17–20.
Y. Yang, S. Wu, G. Li, Y. Li, Y. Lu, K. Yang, and P. Ge: Acta Mater., 2010, vol. 58, pp. 2778–87.
M. Besse, P. Castany, and T. Gloriant: Acta Mater., 2011, vol. 59, pp. 5982–88.
Y. Yang, G. Li, H. Wang, S. Wu, L. Zhang, Y. Li, and K. Yang: Scripta Mater., 2012, vol. 66, pp. 211–14.
S. Guo, Q. Meng, X. Cheng, and X. Zhao: J. Mech. Behav. Biomed. Mater., 2014, vol. 38, pp. 26–32.
T. Furuta, S. Kuramoto, J. Hwang, K. Nishino, and T. Saito: Mater. Trans., 2005, vol. 46, pp. 3001–07.
Acknowledgments
This work was financially supported by the National Natural Science Foundation of China (Grant No. 51171035), the International Thermonuclear Experimental Reactor (ITER) Program of China (Grant No. 2015GB121004), the International Science and Technology Cooperation Program of China (Grant No. 2015DFR60370), the Natural Science Foundation of Liaoning Province of China (Grant No. 2015020202), the Foundation of Guangxi Key Laboratory of Information Materials (Grant No. 161002-K), the Fundamental Research Funds for the Central Universities (Grant No. DUT16ZD212), and the Ministry-Province Jointly-Constructed Cultivation Base for State Key Laboratory of Processing for Nonferrous Metal and Featured Materials (Grant No. GXKFJ16-11).
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted January 24, 2017.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Jiang, B., Wang, Q., Li, X. et al. Structural Stability of the Metastable β-[(Mo0.5Sn0.5)-(Ti13Zr1)]Nb1 Alloy with Low Young’s Modulus at Different States. Metall Mater Trans A 48, 3912–3919 (2017). https://doi.org/10.1007/s11661-017-4148-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-017-4148-0