Abstract
The generation of internal stresses/strains arising from mechanical deformations in single-phase engineering materials was studied. Neutron diffraction measurements were performed to study the evolution of intergranular strains in austenitic steel during sequential loadings. Intergranular strains expand due to incompatibilities between grains and also resulting from single-crystal elastic and plastic anisotropy. A two-level homogenization approach was adopted in order to predict the mechanical state of deformed polycrystals in relation to the microstructure during Bauschinger tests. A mechanical description of the grain was developed through a micro–meso transition based on the Kröner model. The meso–macro transition using a self-consistent approach was applied to deduce the global behavior. Mechanical tests and neutron diffraction measurements were used to validate and assess the model.
Similar content being viewed by others
References
A.A. Saleh, E.V. Pereloma, B. Clausen, D.W. Brown, C.N. Tomé, A.A. Gazder: Acta Mater. 61 (2013) 5247–5262. doi:10.1016/j.actamat.2013.05.017.
D. Gloaguen, G. Oum, V. Legrand, J. Fajoui, S. Branchu: Acta Mater. 61 (2013) 5779–5790. doi:10.1016/j.actamat.2013.06.022.
J. Fajoui, D. Gloaguen, B. Courant, R. Guillén: Comput. Mech. 44 (2009) 285–296. doi:10.1007/s00466-009-0374-7.
D. Muller, X. Lemoine, M. Berveiller: J. Eng. Mater. Technol. 116 (1994) 378–383. doi:10.1115/1.2904301.
D. Muller, M. Berveiller, J. Kratochvíl: Mater. Sci. Forum. 123-125 (1993) 195–204. doi:10.4028/www.scientific.net/MSF.123-125.195.
X. FEAUGAS, P. PILVIN, M. CLAVEL: Acta Mater. 45 (1997) 2703–2714. doi:10.1016/S1359-6454(96)00407-7.
P. Evrard, I. Alvarez-Armas, V. Aubin, S. Degallaix: Mech. Mater. 42 (2010) 395–404. doi:10.1016/j.mechmat.2010.01.007.
Y. Li, V. Aubin, C. Rey, P. Bompard: Int. J. Fatigue. 42 (2012) 71–81. doi:10.1016/j.ijfatigue.2011.07.003.
T. Skippon, M.R. Daymond: Mater. Sci. Eng. A. 634 (2015) 77–85. doi:10.1016/j.msea.2015.03.033.
B. Haddag, T. Balan, F. Abed-Meraim: Int. J. Plast. 23 (2007) 951–979. doi:10.1016/j.ijplas.2006.10.004.
S. Mahesh, C.N. Tomé, R.J. McCabe, G.C. Kaschner, A. Misra, I.J. Beyerlein: Metall. Mater. Trans. A. 35 (2004) 3763–3774. doi:10.1007/s11661-004-0282-6.
S. Hiwatashi, A. Van Bael, P. Van Houtte, C. Teodosiu: Comput. Mater. Sci. 9 (1997) 274–284. doi:10.1016/S0927-0256(97)00069-4.
H. Mughrabi: Phys. Status Solidi A. 104 (1987) 107–120. doi:10.1002/pssa.2211040108.
B. Peeters, M. Seefeldt, C. Teodosiu, S.R. Kalidindi, P. Van Houtte, E. Aernoudt: Acta Mater. 49 (2001) 1607–1619. doi:10.1016/S1359-6454(01)00066-0.
J. Fajoui, D. Gloaguen, B. Girault: Acta Mech. 226 (2015) 2715–2727. doi:10.1007/s00707-015-1347-x.
I. Karaman, H. Sehitoglu, A.J. Beaudoin, Y.I. Chumlyakov, H.J. Maier, C.N. Tomé: Acta Mater. 48 (2000) 2031–2047. doi:10.1016/S1359-6454(00)00051-3.
E.M. Viatkina, W. a. M. Brekelmans, M.G.D. Geers: Comput. Mech. 41 (2008) 391–405. doi:10.1007/s00466-007-0195-5.
M. Knezevic, R.J. McCabe, R.A. Lebensohn, C.N. Tomé, C. Liu, M.L. Lovato, B. Mihaila: J. Mech. Phys. Solids., 2013, vol. 61, pp. 2034–46, DOI:10.1016/j.jmps.2013.05.005.
G. Franz, F. Abed-Meraim, M. Berveiller: Int. J. Plast. 48 (2013) 1–33. doi:10.1016/j.ijplas.2013.02.001.
H. Mughrabi: Acta Metall. 31 (1983) 1367–1379. doi:10.1016/0001-6160(83)90007-X.
X. Lemoine, M. Berveiller, D. Muller: Mater. Sci. Forum. 157-162 (1994) 1821–1826. doi:10.4028/www.scientific.net/MSF.157-162.1821.
F. David, I. Aubert, X. Lemoine, M. Berveiller: Comput. Mater. Sci. 9 (1997) 188–198. doi:10.1016/S0927-0256(97)00074-8.
D. Gloaguen, M. Francois: Phys. Status Solidi Appl. Mater. Sci. 203 (2006) 1940–1953. http://cat.inist.fr/?aModele=afficheN&cpsidt=17860381 (accessed September 3, 2014).
P. Lipinski, M. Berveiller: Int. J. Plast. 5 (1989) 149–172. doi:10.1016/0749-6419(89)90027-2.
P.D. Wu, S.R. MacEwen, D.J. Lloyd, M. Jain, P. Tugcu, K.W. Neale: J. Plast. 21 (2005) 723–739. doi:10.1016/j.ijplas.2004.05.007.
M. Choteau, P. Quaegebeur, S. Degallaix: Mech. Mater. 37 (2005) 1143–1152. doi:10.1016/j.mechmat.2004.12.001.
A.S. Keh, Y. Nakada: Can. J. Phys. 45 (1967) 1101–1120. doi:10.1139/p67-081.
D. Gloaguen, J. Fajoui, B. Girault: Acta Mater. 71 (2014) 136–144. doi:10.1016/j.actamat.2014.02.031.
R. Dakhlaoui, V. Klosek, M.H. Mathon, B. Marini: Acta Mater. 58 (2010) 499–509. doi:10.1016/j.actamat.2009.09.028.
R. Dakhlaoui, A. Baczmański, C. Braham, S. Wroński, K. Wierzbanowski, E.C. Oliver: Acta Mater. 54 (2006) 5027–5039. doi:10.1016/j.actamat.2006.06.035.
J.R. Santisteban, M.R. Daymond, J.A. James, L. Edwards: J. Appl. Crystallogr. 39 (2006) 812–825. doi:10.1107/S0021889806042245.
C.M. Moreton-Smith, S.D. Johnston, F.A. Akeroyd: J. Neutron Res. 4 (1996) 41–47. doi:10.1080/10238169608200066.
W. Kockelmann, L.C. Chapon, and P.G. Radaelli: Neutron texture analysis on GEM at ISIS, in: Phys. B Condens. Matter, Elsevier, 2006: pp. 639–43. http://cat.inist.fr/?aModele=afficheN&cpsidt=18370454 (accessed September 3, 2014).
X. Feaugas: Acta Mater. 47 (1999) 3617–3632. doi:10.1016/S1359-6454(99)00222-0.
G. Vincze, E.F. Rauch, J.J. Gracio, F. Barlat, A.B. Lopes: Acta Mater. 53 (2005) 1005–1013. doi:10.1016/j.actamat.2004.10.046.
K.E. Zur: Acta Metall., 1961, vol. 9, pp.155–61. http://www.refdoc.fr/Detailnotice?idarticle.
C. Schmitt, P. Lipinski, M. Berveiller: Int. J. Plast. 13 (1997) 183–199. doi:10.1016/S0749-6419(95)00007-0.
D. Gloaguen, M. François, R. Guillen: J. Appl. Crystallogr. 37 (2004) 934–940. doi:10.1107/S0021889804022034.
J.D. Eshelby: Proc. R. Soc. Lond. Ser. Math. Phys. Sci. 241 (1957) 376–396. doi:10.1098/rspa.1957.0133.
M. Berveiller, A. Zaoui: J. Mech. Phys. Solids. 26 (1978) 325–344. doi:10.1016/0022-5096(78)90003-0.
C. Beradai, M. Berveiller, P. Lipinski: Int. J. Plast. 3 (1987) 143–162. doi:10.1016/0749-6419(87)90004-0.
E. Nes: Prog. Mater. Sci. 41 (1997) 129–193. doi:10.1016/S0079-6425(97)00032-7.
U. Essmann, H. Mughrabi: Philos. Mag. A. 40 (1979) 731–756. doi:10.1080/01418617908234871.
P. Franciosi: Acta Metall. 33 (1985) 1601–1612. doi:10.1016/0001-6160(85)90154-3.
G. Franz, F. Abed-Meraim, J.-P. Lorrain, T. Ben Zineb, X. Lemoine, M. Berveiller: Int. J. Plast. 25 (2009) 205–238. doi:10.1016/j.ijplas.2008.02.006.
J.-P. Lorrain, T. Ben-Zineb, F. Abed-Meraim, M. Berveiller: Int. J. Form. Process. 8 (2005) 135–158. doi:10.3166/ijfp.8.135-158.
E.F. Rauch, J.J. Gracio, F. Barlat: Acta Mater. 55 (2007) 2939–2948. doi:10.1016/j.actamat.2007.01.003.
K. Kitayama, C.N. Tomé, E.F. Rauch, J.J. Gracio, F. Barlat: Int. J. Plast. 46 (2013) 54–69. doi:10.1016/j.ijplas.2012.09.004.
D. Gloaguen, M. Francois, R. Guillen, J. Royer: Acta Mater. 50 (2002) 871–880. http://cat.inist.fr/?aModele=afficheN&cpsidt=13481335 (accessed September 12, 2014).
D. Gloaguen, G. Oum, V. Legrand, J. Fajoui, M.-J. Moya, T. Pirling: Metall. Mater. Trans. A. 46 (2015) 5038–5046. doi:10.1007/s11661-015-3073-3.
L. Lutterotti, S. Matthies, and H.R. Wenk: in Proceeding Twelfth Int. Conf. Textures Mater. ICOTOM-12, NRC Press Ottawa, Canada, 1999, p. 1599.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted July 8, 2015.
Rights and permissions
About this article
Cite this article
Fajoui, J., Gloaguen, D., Legrand, V. et al. Bauschinger Effect in an Austenitic Steel: Neutron Diffraction and a Multiscale Approach. Metall Mater Trans A 47, 2024–2036 (2016). https://doi.org/10.1007/s11661-016-3362-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-016-3362-5