Abstract
Very weak grain size dependence of yield strength is observed in a peak-aged Mg-10 wt pct Y alloy, in which the Hall-Petch slope k is only 36 pct of that in pure Mg. Such a low grain refinement strengthening response is considered as a result of strong interaction between different strengthening components, and they do not follow a linear superposition law. To determine quantitatively the superposition exponent in the superposition law, the variation of yield strength with grain size in this alloy was examined as solution treated and as peak aged, respectively. The contributions of each major strengthening component, including solid solution, precipitation, and grain refinement strengthening, were evaluated independently based on the data from microstructural characterization. The calculated superposition exponent is scattered around 1.5 with weak dependence on grain size. Furthermore, the effect of solid-solution and precipitation strengthening on the Hall-Petch parameters was also formulated and discussed.
Similar content being viewed by others
References
T. Abbott: Mater. Sci. Forum, 2009, vols. 618–619, pp. 23–26.
R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 4th ed., Wiley, 1995, pp. 123–44.
E. Nembach and G. Neite: Progr. Mater. Sci., 1985, vol. 29, pp. 177–319.
J.C. Huang and A.J. Ardell: Acta Metall., 1988, vol. 36, pp. 2995–3006.
D.J. Chellman, A.J. Luévano, and A.J. Ardell: Proc. 9th Int. Conf. on the Strength of Metals and Alloys, D.G. Brandon, R. Chaim, and A. Rosen, eds., 1991, pp. 53–57.
S. Schänzer and E. Nembach: Acta Metall. Mater., 1992, vol. 40, pp. 803–13.
K.L. Kendig and D.B. Miracle: Acta Mater., 2002, vol. 50, pp. 4165–75.
M.A. Gharghouri, G.C. Weatherly, J.D. Embury, and J. Root: Philos. Mag., 1999, vol. 79A, pp. 1671–95.
M. Mabuchi and K. Higashi: Acta Mater., 1996, vol. 44, pp. 4611–18.
C.H. Cáceres, C.J. Davidson, J.R. Griffiths, and C.L. Newton: Mater. Sci. Eng. A, 2002, vol. 325A, pp. 344–55.
C.H. Cáceres, W.J. Poole, A.L. Bowles, and C.J. Davidson: Mater. Sci. Eng. A, 2005, vol. 402A, pp. 269–77.
E. Orowan: Discussions in Symposium on Internal Stresses in Metals and Alloys, Institute of Metals, London, U.K., 1948, p. 451.
D. Hull and D.J. Bacon: Introduction to Dislocations, 3rd ed., Pergamon Press, New York, NY, 1984, p. 248.
J.-F. Nie: Scripta Mater., 2003, vol. 48, pp. 1009–15.
R.L. Fleischer: Acta Metall., 1961, vol. 9, pp. 996–1000.
R. Labusch: Acta Metall., 1972, vol. 20, pp. 917–27.
L. Gao, R.S. Chen, and E.H. Han: J. Alloys Compd., 2009, vol. 472, pp. 234–40.
J.A. Yasi, L.G. Hector Jr., and D.R. Trinkle: Acta Mater., 2010, vol. 58, pp. 5704–13.
E.O. Hall: Proc. Phys. Soc., Ser. B, 1951, vol. 64, pp. 747–53.
N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
F.E. Hauser, P.R. Langdon, and J.E. Dorn: Trans. AIME, 1956, vol. 1, pp. 589–93.
N. Ono, K. Nakamura, and S. Miura: Mater. Sci. Forum, 2003, vols. 419–422, pp. 195–200.
D.V. Wilson and J.A. Chapman: Philos. Mag., 1963, vol. 8, pp. 1543–51.
Y.N. Wang, C.I. Chang, C.J. Lee, H.K. Lin, and J.C. Huang: Scripta Mater., 2006, vol. 55, pp. 637–40.
M.R. Barnett, Z. Keshavarz, A.G. Beer, and D. Atwell: Acta Mater., 2004, vol. 52, pp. 5093–5103.
P. Andersson, C.H. Cáceres, and J. Koike: Mater. Sci. Forum, 2003, vols. 419–422, pp. 123–28.
S.G. Song and G.T. Gray: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2665–75.
R. Armstrong, I. Codd, R.M. Douthwaite, and N.J. Petch: Philos. Mag., 1962, vol. 7, pp. 45–58.
S.H.C. Yutaka, S. Sato, and H. Kokawa: J. Mater. Sci., 2003, vol. 38, pp. 4379–83.
J.P. Weiler, J.T. Wood, and R.J. Klassen: J. Mater. Sci., 2005, vol. 40, pp. 5999–6005.
A. Jain, O. Duygulu, D.W. Brown, C.N. Tomé, and S.R. Agnew: Mater. Sci. Eng. A, 2008, vol. 486, pp. 545–55.
C.H. Caceres, G.E. Mann, and J.R. Griffiths: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1950–59.
T. Sato, I. Takahashi, H. Tezuka, and A. Kamio: Keikinzoku, 1992, vol. 42, pp. 804–09.
S.-Y. Chang, T. Nakagaido, S.-K. Hong, D.H. Shin, and T. Sato: Metall. Mater. Trans. A, 2001, vol. 42A, pp. 1332–38.
D. Qiu, M.-X. Zhang, J.A. Taylor, and P.M. Kelly: Acta Mater., 2009, vol. 57, pp. 3052–59.
D. Qiu and M.-X. Zhang: J. Alloys Compd., 2010, vol. 488, pp. 260–64.
Y. Tamura and T. Motegi: J. Light Met. Weld. Construct., 1997, vol. 47, pp. 679–84.
M. Qian, D.H. StJohn, and M.T. Frost: Magnesium Technology, H.I. Kaplan, ed., TMS, Warrendale, PA, 2003, p. 209.
H. Okamoto: J. Phase Equilib., 1992, vol. 13, pp. 105–06.
M. Nishijima, K. Yubuta, and K. Hiraga: Mater. Trans., 2007, vol. 48, pp. 84–87.
M.-X. Zhang and P.M. Kelly: Scripta Mater., 2003, vol. 48, pp. 379–84.
J. Nie and B.C. Muddle: Acta Mater., 2008, vol. 56, pp. 3490–3501.
C.H. Cáceres and P. Lukáč: Philos. Mag., 2008, vol. 88, pp. 977–89.
Acknowledgment
The authors are very thankful to the Australian Research Council for funding support.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted October 16, 2011.
Rights and permissions
About this article
Cite this article
Qiu, D., Zhang, MX. Strengthening Mechanisms and their Superposition Law in an Age-Hardenable Mg-10 wt pct Y Alloy. Metall Mater Trans A 43, 3314–3324 (2012). https://doi.org/10.1007/s11661-012-1162-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-012-1162-0