This study investigates the sensitization behavior of AISI 304LN deformed previously by cold rolling (CR) to 5 pct to 25 pct reduction in thickness and aged at 673 K to 873 K (400 °C to 600 °C). The emphasis was on revealing the degree of sensitization (DOS) resulting from low-temperature sensitization (LTS) on the orthogonal surfaces and correlation thereof with the changes in various metallurgical properties caused by cold rolling. It was found that the DOS differs among the orthogonal surfaces such as the rolling surface (RS), transverse surface (TS), and cross transverse surface (CTS). RS showed lower DOS compared with CTS and TS. The differences in the DOS were attributed to the combined effect of deformation-induced martensite (DIM), grain size, and slip band formation. A deformation of 5 pct was critical to the susceptibility of AISI 304LN to intergranular (IGC) and transgranular corrosion (TGC). The sensitization kinetics was slow or saturated leading to desensitization beyond 5pct deformations at 773 K (500 °C) and 873 K (600 °C). It was, however, uniformly accelerated over 5 to 25 pct deformation when aged at 673 K (400 °C).
Similar content being viewed by others
References
M.J. Povich: Corrosion, 1978, vol. 34, pp. 60–65.
M.J. Povich and P. Rao: Corrosion, 1978, vol. 34, pp. 269–75.
T. Kekkonen, P. Aaltonen, and H. Hanninen: Corros. Sci., 1985, vol. 25, pp. 821–38.
T.A. Mozhi, M.C. Juhas, and B.E. Wilde: Scripta Metall., 1987, vol. 21, pp. 1547–52.
S.M. Bruemmer, L.A. Charlott, B.W. Arey: Corrosion, 1988, vol. 44, pp. 328–33.
R. Beltran, J.G. Maldonaldo, L.E. Murr, and W.W. Fisher: Acta Mater., 1997, vol. 45, pp. 4351–60.
S. Pednekar and S. Smialowska: Corrosion, 1980, vol. 36, pp. 565–77.
R.L. Fullman: Electric Power Research Institute Report No. WS-79-17, 1980.
N. Parvathavarthini, R.K. Dayal, S.K. Sheshadri, and J.B. Gnanamoorthy: J. Nucl. Mater., 1989, vol. 168, pp. 83–96.
R. Singh, B.R. Kumar, A. Kumar, P.K. Dey, and I. Chattoraj: Metall. Mater. Trans. A, 2003A, vol. 35A, pp. 2441–47.
V. Kain, K. Chandra, K.N. Adhe, and P.K. De: J. Nucl. Mater., 2004, vol. 334, pp. 115–32.
V. Kain, K. Chandra, K.N. Adhe, and P.K. De: Corrosion, 2005, vol. 61, pp. 587–93.
D.R. Askeland: The Science and Engineering of Materials, Chapman Hall, Oxford, UK, 1996, pp. 188–215.
R.K. Dayal, N. Parvathavarthini, J.B. Gnanamoorthy, and P. Rodriguez: Proceeding: Stainless Steel Processing and Metallurgy, P.K. Rao, M.K. Asundi, N.B. Ballal, and S. Gadiyar, eds., 1992, pp. 385–91.
R. Singh, G. Das, P.K. Singh, and I. Chattoraj: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1219–34.
ASTM Standard Designation A262-Practice A-F, 1994, ASTM, Philadelphia, PA, 1993, vol. 03.02, pp. 1–16.
P. Umemura, M. Akashi, and T. Kawamoto: Corros. Eng., 1980, vol. 29, pp. 163–68.
N. Saito, Y. Tsuchiya, F. Kano, and N. Tanaka: Corrosion, 2000, vol. 56, pp. 57–69.
E. Almanza and L.E. Murr: J. Mater Sci., 2000, vol. 35, pp. 3181–88.
L.E. Murr and F.I. Grace: Trans. TMS-AIME, 1969, vol. 245, pp. 2225–35.
A.F. Padilha, R.L. Plaut, and P.R. Rios: ISIJ Int., 2003, vol. 43, pp. 135–43.
L.F.M. Martins, R.L. Plaut, and A.F. Padilha: ISIJ Int., 1998, vol. 38, pp. 572–79.
S.G.Chowdhury and R. Singh: Scripta Mater., 2008, vol. 58, pp. 1102–05.
R. Langeborg: Acta Metall., 1964, vol. 12, pp. 823–43.
J.F. Breedis and W.D. Robertson: Acta Metall., 1962, vol. 11, pp. 1077–88.
D.A. Porter and K.E. Easterling: Phase Transformation in Metals and Alloys, Chapman & Hall, London, UK, 1992, pp. 401–06.
D. Goodchild, W.T. Roberts, and D.V. Wilson: Acta Metall., 1970, vol. 18, pp. 1137–45.
R. Singh, S.G. Chowdhury, B. Ravi Kumar, S.K. Das, P.K. De, and I. Chattoraj: Scripta Mater., 2007, vol. 57, pp. 185–88.
Acknowledgments
The authors thank the Board of Research in Nuclear Science (BRNS) for funding this work (Grant GAP-0172). Help rendered by Shri Mukesh Kumar and Ujjwal Mukherji during experimental work is acknowledged gratefully.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted June 17, 2011.
Rights and permissions
About this article
Cite this article
Singh, R., Chowdhury, S.G., Das, G. et al. Low Temperature Sensitization on the Orthogonal Surfaces of Prior Deformed AISI 304LN and Aged at 673 K to 873 K (400 °C to 600 °C). Metall Mater Trans A 43, 986–1003 (2012). https://doi.org/10.1007/s11661-011-1011-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-011-1011-6