Abstract
Hydrogen re-embrittlement on anodically coated high strength steels could be of great concern because the uptake of hydrogen from the corrosion process can cause component failure. A scratched Cd-coated AISI 4340 steel membrane has been coupled with different materials reproducing crevice conditions, and the hydrogen uptake has been measured using a modified Devanathan–Stachurski permeation apparatus. Experimental tests proved that, in presence of a crevice, metals nobler than cadmium strongly enhance local hydrogen reduction on exposed steel areas, thus possibly favoring brittle failure of high strength steel components during service. Therefore, the coupling of uncoated nuts made of noble passive alloys (like Inconel) to Cd-plated AISI 4340 steel bolts should be avoided.
Similar content being viewed by others
References
G. Chalaftris and M.J. Robinson: Corr. Eng. Sci. Tech., 2005, vol. 40, pp. 28-32.
D.J. Figueroa Gordon: Ph.D. Dissertation, Cranfield University, Cranfield, UK, 2005.
D. Figueroa and M.J. Robinson: Corr. Sci., 2008, vol. 50, pp. 1066-79.
A. Duval and M.J. Robinson: Corr. Eng. Sci. Tech., 2009, vol. 44, pp. 340-46.
R.A. Oriani: Ann. Rev. Mater. Sci., 1978, vol. 8, pp. 327-57.
M. Nagumo, M. Nakamura, and K. Takai: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 339-47.
R.L.S. Thomas, J.R. Scully, and R.P. Gangloff: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 327-44.
E.U. Lee, A. Hilgeman, E. Beck, S. Brown, and C.A. Matzdorf: Proc. Tri-Service Corrosion Conference 2007, Denver, CO.
E.M.K. Hillier and M.J. Robinson: Corr. Sci., 2003, vol. 46, pp. 715-27.
A. Conde, M.A. Arenas, and J.J. de Damborenea: Corr. Sci., 2011, vol. 53, pp. 1489-97.
B.E. Placzankis, C.E. Miller, S.M. Grendahl, M.J. Kane, and K.J. Bhansali: Proc. Tri-Service Corrosion Conf. 2005, Orlando, FL.
M.A.V. Devanathan and Z. Stachurski: Proc. R. Soc. London, Ser. A, 1962, vol. 270, pp. 90-102.
H. J. Grabke and E. Riecke: Mater. Tehnol., 2000, vol. 6, pp. 331-42.
ASM Handbook, vol. 13, Corrosion, ASM International, Materials Park, OH, 1996, p. 587.
P. Roberge: Corrosion Basis: An Introduction, 2nd ed., NACE International, Houston, TX, 2006, p. 361.
H.g Zhong, Y. Li, Y. Zhou1, C. Yang, and Y. Li: Nanotechnology, 2006, vol. 17, pp. 772-7.
D.W. Oxtoby, H.P. Gillis, and A. Campion: Principles of Modern Chemistry, 6th ed., Thomson Learning Inc., Belmont, CA, 2008, pp. 688-89.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted January 26, 2011.
Rights and permissions
About this article
Cite this article
Lovicu, G.F., Colombo, C., De Sanctis, M. et al. Hydrogen Uptake Enhancement and Accelerated Hydrogen Re-embrittlement of Cd-plated AISI 4340 Steel Bolts Coupled with IN718 Nuts. Metall Mater Trans A 42, 3577–3580 (2011). https://doi.org/10.1007/s11661-011-0880-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-011-0880-z