Abstract
Infrared (IR) thermography was used to measure thermal profiles in the coating, consumable rod, and substrate during friction surfacing. A sudden raise followed by a steady state in thermal profile was observed and attributed to viscous heat dissipation during plastic deformation. The retreating side of the coating experienced higher temperature compared to the advancing side, indicating that the hot plasticized metal is carried from the advancing side to the retreating side.
Similar content being viewed by others
References
A.W. Batchelor, S. Jana, C.P. Koh, and C.S. Tan: J. Mater. Process. Technol., 1996, vol. 57, pp. 172–81.
G. Madhusudhan Reddy, K. Srinivasa Rao, and T. Mohandas: Surf. Eng., 2009, vol. 25 (1), pp. 25–30.
H. Thoman and B. Frisk: Int. J. Heat Mass Transfer, 1968, vol. 2, pp. 819–26.
C. Meola and G.M. Carlomagno: Meas. Sci. Technol., 2004, vol. 15, pp. 27–58.
S. Matte, D. Grevey, A. Mathieu, and L. Kirchner: Opt. Laser Technol., 2009, vol. 41, pp. 665–70.
R.S. Huang, L.M. Liu, and G. Song: Mater. Sci. Eng. A, 2007, vol. 447, pp. 239–43.
G. Bruggemann, A. Mahrle, and T. Benziger: NDT&E Int., 2000, vol. 33, pp. 453–63.
A. Mathieu, S. Mattei, A. Deschamps, B. Martin, and D. Grevey: NDT&E Int., 2006, vol. 39, pp. 272–76.
M.L. Pastor, X. Balandraud, M. Gre′diac, and J.L. Robert: Infrared Phys. Technol., 2008, vol. 51, pp. 505–15.
S. Paoloni, M.E. Tata, F. Scudieri, F. Mercuri, M. Marinelli, and U. Zammit: Appl. Phys. A, 2010, vol. 98, pp. 461–65.
S. Marinetti and V. Vavilov: Corros. Sci., 2010, vol. 52, pp. 865–72.
G.M. Bedford, V.I. Vitanov, and I.I. Voutchkov: Surf. Coat. Technol., 2001, vol. 14, pp. 134–39.
X.M. Liu, Z.D. Zou, Y.H. Zhang, S.Y. Qu, and X.H. Wang: Surf. Coat. Technol., 2008, vol. 202, pp. 1889–94.
R. Nandan, T. DebRoy, and H.K.D.H. Bhadeshia: Prog. Mater. Sci., 2008, vol. 53, pp. 980–1023.
G.A. Kluitenberg: Physica, 1967, vol. 35, pp. 177–92.
H. Khalid Rafi, G. Phanikumar, and K. Prasad Rao: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 937–39.
H. Khalid Rafi, G.D. Janaki Ram, G. Phanikumar, and K. Prasad Rao: Mater. Des., 2011, vol. 32, pp. 82–87.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted January 29, 2011.
Rights and permissions
About this article
Cite this article
Khalid Rafi, H., Balasubramaniam, K., Phanikumar, G. et al. Thermal Profiling Using Infrared Thermography in Friction Surfacing. Metall Mater Trans A 42, 3425–3429 (2011). https://doi.org/10.1007/s11661-011-0750-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-011-0750-8