Abstract
The partitioning of elements during solidification of ternary and quaternary Mg-Al-Ca alloys has been measured by an electron microprobe segregation mapping technique. Differences in the degree of partitioning of Al and Ca to the α-Mg phase in as-solidified MRI230D, AX44, AXJ530, and MRI153M alloys was observed. MRI230D has a higher level of Al and Ca in the primary α-Mg phase, while only a higher level of Al is observed in MRI153M, compared with AX44 and AXJ530. While the increased levels of Al in the MRI alloys may be due in part to higher bulk Al concentrations, the higher level of Ca in the primary phase of MRI230D is attributable to the presence of Sn in this alloy. The differences in the partitioning of Al and Ca to the primary α-Mg phase during solidification influence both solid solution and precipitation strengthening, which can explain observed differences in creep behavior.
Similar content being viewed by others
Notes
PANDAT is a trademark of CompuTherm LLC, Madison, WI.
References
M.O. Pekguleryuz and E. Baril: Mater. Trans., 2001, vol. 42, pp. 1258–67.
P. Bakke, H. Westengen, S. Sannes, and D. Albright: SAE 2004 World Congr., Vol. 2004-01-0655, SAE International, Detroit, MI, 2004.
A.A. Luo: Int. Mater. Rev., 2004, vol. 49, pp. 13–30.
Y. Mori, Y. Terada, and T. Sato: Mater. Trans., 2005, vol. 46, pp. 1747–52.
A.A. Luo, M.P. Balogh, and B.R. Powell: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 567–74.
Y. Terada, N. Ishimatsu, and T. Sato: Mater. Trans., 2007, vol. 48, pp. 2329–35.
Y. Terada, R. Sota, N. Ishimatsu, T. Sato, and K. Ohori: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3029–32.
A. Suzuki, N.D. Saddock, L. Riester, E. Lara-Curzio, J.W. Jones, and T.M. Pollock: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 420–27.
A. Suzuki, N.D. Saddock, J.R. TerBush, B.R. Powell, J.W. Jones, and T.M. Pollock: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 696–702.
A. Suzuki, N.D. Saddock, J.W. Jones, and T.M. Pollock: Scripta Mater., 2004, vol. 51, pp. 1005–10.
A. Suzuki, N.D. Saddock, J.W. Jones, and T.M. Pollock: Acta Mater., 2005, vol. 53, pp. 2823–34.
A. Suzuki, N.D. Saddock, J.R. TerBush, B.R. Powell, J.W. Jones, and T.M. Pollock: in 2007 SAE World Congr., Vol. 2007-01-1025, SAE International, Detroit, MI, 2007.
A. Suzuki, N.D. Saddock, J.W. Jones, and T.M. Pollock: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 975–83.
N.D. Saddock, A. Suzuki, J.R. TerBush, J.W. Jones, T.M. Pollock, J.E. Zindel, and J.E. Allison: 2007 SAE World Congress, Vol. 2007-01-1027, SAE International, Detroit, MI, 2007.
N.D. Saddock: Ph.D. Thesis, University of Michigan, Ann Arbor, MI, 2007.
N.D. Saddock, A. Suzuki, J.R. TerBush, J.W. Jones, and T.M. Pollock: in Magnesium Technology 2007, R.S. Beals, A.A. Luo, N.R. Neelameggham, and M.O. Pekguleryuz, eds., TMS, Warrendale, PA, 2007, pp. 407–12.
J.R. TerBush, A. Suzuki, N.D. Saddock, J.W. Jones, and T.M. Pollock: Scripta Mater., 2008, vol. 58, pp. 914–17.
J.R. TerBush, J.W. Jones, and T.M. Pollock: in Magnesium Technology 2008, M.O. Pekguleryuz, N.R. Neelameggham, R.S. Beals, and E.A. Nyberg, eds., TMS, Warrendale, PA, 2008, pp. 117–22.
N.D. Saddock, A. Suzuki, J.R. TerBush, E.C. Heininger, J. Zindel, J.E. Allison, T.M. Pollock, and J.W. Jones: in Magnesium Technology 2006, A.A. Luo, N.R. Neelameggham, and R.S. Beals, eds., TMS, Warrendale, PA, 2006, pp. 77–82.
Y.M. Won and B.G. Thomas: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1755–67.
D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., Nelson Thornes Ltd., Cheltenham, 1992, pp. 185–262.
H.D. Brody and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 615–24.
T.F. Bower, H.D. Brody, and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 624–34.
C. Zhang, D. Ma, K. Wu, H. Cao, J. Zhu, G. Cao, S. Kou, and Y.A. Chang: in Magnesium Technology 2006, A.A. Luo, N.R. Neelameggham, and R.S. Beals, eds., TMS, Warrendale, PA, 2006, pp. 45–50.
C. Zhang, D. Ma, K.-S. Wu, H.-B. Cao, G.-P. Cao, S. Kou, Y.A. Chang, and X.-Y. Yan: Intermetallics, 2007, vol. 15, pp. 1395–1400.
D. Mirkovic and R. Schmid-Fetzer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 958–73.
D. Mirkovic and R. Schmid-Fetzer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 974–81.
D. Mirkovic and R. Schmid-Fetzer: in Magnesium Technology 2009, E.A. Nyberg, S.R. Agnew, N.R. Neelameggham, and M.O. Pekguleryuz, eds., TMS, Warrendale, PA, 2009, pp. 97–100.
M. Gungor: Metall. Trans. A, 1989, vol. 20A, pp. 2529–33.
S.C. Huang, L. Peluso, and D. Backman: in Solidification, W.H. Hofmeister, J.R. Rogers, N.B. Singh, S.P. Marsh, and P.W. Vorhees, eds., TMS, Warrendale, PA, 1999, pp. 163–72.
S. Tin, T.M. Pollock, and W. Murphy: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1743–53.
M.S. Dargusch, K. Pettersen, K. Nogita, M.D. Nave, and G.L. Dunlop: Mater. Trans., 2006, vol. 47, pp. 977–82.
F.A. Mohamed and T.G. Langdon: Acta Metall., 1974, vol. 22, pp. 779–88.
K. Maruyama, M. Suzuki, and H. Sato: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 875–82.
S.M. Zhu, M.A. Gibson, J.F. Nie, M.A. Easton, and T.B. Abbott: Scripta Mater., 2008, vol. 58, pp. 477–80.
T. Uesugi, M. Kohyama, and K. Higashi: Mater. Sci. Forum, 2003, vols. 426–432, pp. 599–604.
ASM Handbook, Vol. 3—Alloy Phase Diagrams, ASM INTERNATIONAL, Metals Park, OH, 1992.
Acknowledgments
The authors acknowledge the support of the National Science Foundation FRG, Grant Nos. F015408 and DMR-0309468. We also thank J. Zhu, R. Adharapurapu, C. Torbet, and C. Henderson, University of Michigan, for their assistance; A. Suzuki, GE Global Research, for her advice; and B.R. Powell, General Motors, for his many helpful discussions.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted January 15, 2009.
Rights and permissions
About this article
Cite this article
TerBush, J.R., Saddock, N.D., Jones, J.W. et al. Partitioning of Solute to the Primary α-Mg Phase in Creep-Resistant Mg-Al-Ca–Based Cast Alloys. Metall Mater Trans A 41, 2435–2442 (2010). https://doi.org/10.1007/s11661-010-0271-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-010-0271-x