Abstract
Bulk nanostructured Al-4 wt pct Cu alloy with high compression strength (879 MPa) was produced by mechanical alloying followed by vacuum hot pressing (VHP). The hot-pressed compacts were nanostructured with a grain size of 50 nm and were densified to more than 99 pct of the theoretical density. Contributions from different strengthening mechanisms were estimated using simplified models and were compared with the experiment.
Similar content being viewed by others
Notes
PHILIPS is a trademark of FEI Company, Hillsboro, OR.
References
J. Fecht, E. Hellstern, Z. Fu, and W.L. Johnson: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 2333–37.
R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.
Y.T. Zhu, G. Jiang, J.Y. Huang, and T.C. Lowe: Metall. Mater. Trans. A. 2001, vol. 32A, pp. 1559–62.
B.S. Murty and S. Ranganathan: Int. Mater. Rev., 1998, vol. 43, pp. 101–41.
S. Billard, J.P. Fondère, B. Bacroix, and G.F. Dirras: Acta Mater., 2006, vol. 54, pp. 411–21.
A. Benghalem and D.J. Morris: Mater. Sci. Eng. A, 1993, vol. 161, pp. 255–66.
T. Shanmugasundaram, B.S. Murty, and V. Subramanya Sarma: Scripta Mater., 2006, vol. 54, pp. 2013–17.
J.B. Fogagnolo, D. Amador, E.M. Ruiz-Navas, and J.M. Torralba: Mater. Sci. Eng. A, 2006, vol. 433, pp. 45–49.
G.K. Williamson and W.H. Hall: Acta Metall.,1953, vol. 1, pp. 22–31.
M.U. Cohen: Rev. Sci. Instrum., 1935, vol. 6, pp. 68–74.
H.J. Choi, S.W. Lee, J.S. Park, and D.H. Bae: Scripta Mater., 2008, vol. 59, p. 1123–26.
J.A Rodriguez, J.M. Gallardo, and E.J. Herrera: J. Mater. Sci., 1997, vol. 32, pp. 3535–39.
V.L. Tellkamp, A. Melmed, and E.J. Lavernia: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2335–43.
ASM Metals Reference Book, ASM INTERNATIONAL, Materials Park, OH, 1984.
G.E. Totten and D.S. Mackenzie: Handbook of Aluminum, Marcel Dekker, New York, NY, 2003.
B. Cao, S.P Joshi, and K.T. Ramesh: Scripta Mater., 2009, vol. 60, pp. 619–22.
G. Taylor: Proc. R. Soc. A, 1934, vol. 145, pp. 362–87.
G.K. Williamson and R.E. Smallman: Phil. Mag., 1956, vol. 1, pp. 34–46.
U.F. Kocks, A.S. Argon, and M.F. Ashby: Prog. Mater. Sci., 1975, vol. 19, p. 69.
One of the authors (TS) thanks the Deutscher Akademischer Austausch Dienst (DAAD), for a research fellowship, during which period a part of the work was carried out at Otto-von-Guericke University (Magdeburg, Germany).
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted June 15, 2009.
Rights and permissions
About this article
Cite this article
Shanmugasundaram, T., Heilmaier, M., Murty, B.S. et al. Microstructure and Mechanical Properties of Nanostructured Al-4Cu Alloy Produced by Mechanical Alloying and Vacuum Hot Pressing. Metall Mater Trans A 40, 2798–2801 (2009). https://doi.org/10.1007/s11661-009-0005-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-009-0005-0