Abstract
Using an infrared (IR) camera, we observed in situ the dynamical shear-banding processes of the geometrically constrained specimens of a Zr-based bulk metallic glass in a quasi-static compression at various strain rates, measured the temperature evolutions within the specimens, and calculated the temperature increases in shear bands. Strain-rate-dependent serrated plastic flow is a result of shear-banding operations. The average temperature increases in the specimens are observed during the plastic deformation and their magnitudes are strain rate dependent. The temperature increases in shear bands are related to strain rates. The higher the strain rates, the larger the temperature increases in a shear band. The shear strain in a shear band may be responsible for the strain-rate-dependent temperature increase in a shear band.
Similar content being viewed by others
Notes
VITRELOY 105 is a trademark of Liquidmetal Technologies, Lake Forest, California.
MATLAB is a trademark of The MathWorks, Inc., Natick, Massachusetts.
References
A. Inoue, B.L. Shen, H. Koshiba, H. Kato, A.R. Yavari: Nat. Mater., 2003, vol. 2, pp. 661–63
W.L. Johnson: MRS Bull., 1999, vol. 24, pp. 42–56
R.V.S. Rao, U. Wolff, S. Baunack, J. Eckert, A. Gebert: J. Mater. Res., 2003, vol. 18, pp. 97–105
U.K. Mudalli, S. Baunack, J. Eckert, L. Schultz, A. Gebert: J. Alloys Compd., 2004, vol. 377, pp. 290–97
R.V.S. Rao, U. Wolff, S. Baunack, J. Eckert, A. Gebert: Corr. Sci., 2003, vol. 45, pp. 817–32
W.H. Peter, P.K. Liaw, R.A. Buchanan, C.T. Liu, C.R. Brooks, J.A. Horton, C.A. Carmichael, J.L. Wright: Intermetallics, 2002, vol. 10, pp. 1125–29
W.H. Peter, R.A. Buchanan, C.T. Liu, P.K. Liaw: J. Non-Crystalline Solids, 2003, vol. 317, pp. 187–92
G.Y. Wang, P.K. Liaw, A. Peker, B. Yang, M.L. Benson, Y. Wuan, W.H. Peter, L. Huang, A. Freels, R.A. Buchanan, C.T. Liu, C.R. Brooks: Intermetallics, 2005, vol. 13, pp. 429–35
G.Y. Wang, P.K. Liaw, W.H. Peter, B. Yang, M. Freels, Y. Yokoyama, M.L. Benson, B.A. Green, T.A. Saleh, R.L. McDaniels, R.V. Steward, R.A. Buchanan, C.T. Liu, C.R. Brooks: Intermetallics, 2004, vol. 12, pp. 1219–27
W.H. Peter, R.A. Buchanan, C.T. Liu, P.K. Liaw: Intermetallics, 2002, vol. 10, pp. 1157–62
M.L. Morrison, R.A. Buchanan, O.N. Senkov, D.B. Miracle, P.K. Liaw: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1239–45
M.L. Morrison, R.A. Buchanan, R.V. Leon, C.T. Liu, B.A. Green, P.K. Liaw, J.A. Horton: J. Biomedical Mater. Res. Part A, 2005, vol. 74, pp. 430–38
G.Y. Wang, P.K. Liaw, W.H. Peter, B. Yang, Y. Yokoyama, M.L. Benson, B.A. Green, M.J. Kirkham, S.A. White, T.A. Saleh, R.L. McDaniels, R.V. Steward, R.A. Buchanan, C.T. Liu, C.R. Brook: Intermetallics, 2004, vol. 12, pp. 885–92
H. Kimura and T. Masumoto: in Amorphous Metallic Alloys: Strength, Ductility and Toughness—a Model Study in Mechanics, F.E. Luborsky, ed., Butterworth and Co., London, 1983, p. 187
F. Spaepen and A.I. Taub: in Amorphous Metallic Alloys: Flow and Fracture, F.E. Luborsky, ed., Butterworth and Co., London, 1983, pp. 248–56
A.V. Sergueeva, N.A. Mara, J.D. Kuntz, D.J. Branagan, A.K. Mukherjee: Mater. Sci. Eng. A, 2004, vol. 383, pp. 219–23
T. Mukai, T.G. Nieh, Y. Kawamura, A. Inoue, K. Higashi: Scripta Mater., 2002, vol. 46, pp. 43–47
W.J. Wright, R. Saha, W.D. Nix: Mater. Trans. JIM, 2001, vol. 42, pp. 642–49
H.S. Chen: Scripta Metall., 1973, vol. 7, pp. 931–35
C.A. Pampillo: J. Mater. Sci., 1975, vol. 10, pp. 1194–1227
H. Kimura, T. Masumoto: Acta Metall., 1983, vol. 31, pp. 231–40
W.J. Wright, R.B. Schwarz, W.D. Nix: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 229–32
W.H. Jiang, F.X. Liu, D.C. Qiao, H. Choo, P.L. Liaw: J. Mater. Res., 2006, vol. 21, pp. 1570–75
W.H. Jiang, G.J. Fan, F.X. Liu, G.Y. Wang, H. Choo, P.L. Liaw: J. Mater. Res., 2006, vol. 21, pp. 2164–67
W.H. Jiang, G.J. Fan, F.X. Liu, G.Y. Wang, H. Choo, and P.L. Liaw: Int. J. Plasticity, 2007, in press
H. Kimura, T. Masumoto: Acta Metall., 1980, vol. 28, pp. 1663–75
H. Kimura, T. Masumoto: Acta Metall., 1980, vol. 28, pp. 1677–93
H. Kimura, T. Masumoto: Phil. Mag. A, 1981, vol. 44, pp. 1005–20
Y.I. Golovin, V.I. Ivolgin, V.A. Khonik, K. Kitagawa, K.A.I. Tyurin: Scripta Mater., 2001, vol. 45, pp. 947–52
C.A. Schuh, T.G. Nieh: Acta Mater., 2003, vol. 51, pp. 87–99
C.A. Schuh, A.C. Lund, T.G. Nieh: Acta Mater., 2004, vol. 52, pp. 5879–91
G.P. Zhang, W. Wang, B. Zhang, J. Tan, C.S. Liu: Scripta Mater., 2005, vol. 52, pp. 1147–51
C.A. Schuh, A.S. Argon, T.G. Nieh, J. Wadsworth: Phil. Mag., 2003, vol. 83, pp. 2585–97
C.A. Schuh, T.G. Nieh, Y. Kawamura: J. Mater. Res., 2002, vol. 17, pp. 1651–54
W.H. Jiang, M. Atzmon: J. Mater. Res., 2003, vol. 18, pp. 755–57
H. Chen, Y. He, G.J. Shiflet, S.J. Poon: Nature, 1994, vol. 367, pp. 541–43
Y. He, G.J. Shiflet, S.J. Poon: Acta Metall. Mater., 1995, vol. 43, pp. 83–91
M.C. Gao, R.E. Hackenberg, G.J. Shiflet: Mater. Trans. JIM, 2001, vol. 42, pp. 1741–47
J.J. Kim, Y. Choi, S. Suresh, A.S. Argon: Science, 2002, vol. 295, pp. 654–57
W.H. Jiang, F.E. Pinkerton, M. Atzmon, J. Appl. Phys., 2003, vol. 93, pp. 9287–90
W.H. Jiang, M. Atzmon: Acta Mater., 2003, vol. 51, pp. 4095–105
W.H. Jiang, F.E. Pinkerton, M. Atzmon: Scripta Mater., 2003, vol. 48, pp. 1195–200
W.H. Jiang, M. Atzmon: Scripta Mater., 2006, vol. 54, pp. 333–36
W.H. Jiang, F.E. Pinkerton, M. Atzmon: Acta Mater., 2005, vol. 53, pp. 3469–77
W.H. Jiang, F.E. Pinkerton, M. Atzmon: J. Mater. Res., 2005, vol. 20, pp. 696–702
K.M. Flores, D. Suh, R.H. Dauskardt: J. Mater. Res., 2002; vol. 17, pp. 1153–61
H. Hajlaoui, T. Benameur, G. Vaughan, A.R. Yavari: Scripta Mater., 2004, vol. 51, pp. 843–48
H.J. Jeamy, H.S. Chen, T.T. Wang: Metall. Trans., 1971, vol. 3, pp. 699–706
A.S. Argon: Acta Metall., 1979, vol. 27, pp. 47–58
B. Yang, M.L. Morrison, P.K. Liaw, R.A. Buchanan, G.Y. Wang, C.T. Liu, and M. Denda: Appl. Phys. Lett., 2005, vol. 86, 141904 (1–3)
B. Yang, C.T. Liu, T.G. Nieh: J. Mater. Res., 2006, vol. 21, pp. 915–22
Y. Zhang and A.L. Greer: Appl. Phys. Lett. 2006, vol. 89, 071907 (1–3)
J.J. Lewandowski, A.L. Greer: Nat. Mater., 2006, vol. 5, pp. 15–18
W.H. Jiang, G.J. Fan, H. Choo, P.K. Liaw: Mater. Lett., 2006, vol. 60, pp. 3537–40
B. Yang, P.K. Liaw, G.Y. Wang, M.L. Morrison, C.T. Liu, R.A. Buchanan, Y. Yokoyama: Intermetallics, 2004, vol. 12, pp. 1265–74
S.C. Glad, R. Busch, D.S. Lee, W.L. Johnson: J. Appl. Phys., 2000, vol. 87, pp. 7242–48
J.D. Eshelby, P.L. Pratt: Acta Metall., 1956, vol. 4, pp. 560–62
M. Yamasaki, S. Kagao, Y. Kawamura: Appl. Phys. Lett., 2004, vol. 84, pp. 4653–55
W.H. Jiang, F.X. Liu, H. Choo, and P.K. Liaw: Appl. Phys. Lett., 2007, vol. 90, pp. 181903 (1–3)
Acknowledgments
This work was supported by the National Science Foundation (NSF) International Materials Institutes (IMI) Program (Grant No. DMR-0231320) with Dr. C. Huber as the Program Director.
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is based on a presentation given in the symposium entitled “Bulk Metallic Glasses IV,” which occurred February 25–March 1, 2007 during the TMS Annual Meeting in Orlando, Florida under the auspices of the TMS/ASM Mechanical Behavior of Materials Committee.
Rights and permissions
About this article
Cite this article
Jiang, W., Liao, H., Liu, F. et al. Rate-Dependent Temperature Increases in Shear Bands of a Bulk-Metallic Glass. Metall Mater Trans A 39, 1822–1830 (2008). https://doi.org/10.1007/s11661-007-9321-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-007-9321-4