Abstract
The HASTELLOY C2000 superalloy is a commercially designed superalloy manufactured to function in reducing and oxidizing corrosive solutions. The industrial applications have tremendous potential in automotive, structural, aviation, and storage components. Although C2000 demonstrates good reducing and oxidizing traits in extremely aggressive media (which are attractive features of its chemistry), changes in the mechanical properties are believed to be insignificant due to its strong propensity to passivate under corrosive conditions. The ductility behavior and corrosion properties of C2000 are superior to those of stainless steels. The objective of the present study is to examine the corrosion-fatigue behavior of C2000 in a 3.5 wt pct sodium-chloride (NaCl) solution. C2000 submerged in 3.5 wt pct NaCl at room temperature is not susceptible to localized corrosion, such as pitting, during fatigue. At an accelerated potential of 350 mV, the current responses show an increase in the current due to slip steps emerging to the surface as a result of fatigue. The crack-initiation site and the examination of the fracture morphology are discussed.
Similar content being viewed by others
Notes
HASTELLOY is a trademark of Haynes International, Kokomo, IN.
References
A.I. Asphahani, N. Sridhar: Corrosion, 1982, vol. 38 (11), pp. 587–95
M.P. Mueller: Corrosion, 1982, vol. 38 (8), pp. 431–36
M. Muller: Metall. Mater. Trans. A, 1982, vol. 13, pp. 649–55
G. Murtaza, R. Akid: Eng. Fract. Mech., 2000, vol. 67 (5), pp. 461–74
A. Boateng, J.A. Begley, R.W. Staehle: Corrosion, 1980, vol. 36 (11), pp. 633–38
A. Boateng, J.A. Begley, R.W. Staehle: Corrosion, 1977, vol. 33 (4), pp. 152–52
C. Patel, T. Pyle, V. Rollins: Nature, 1977, vol. 266 (5602), pp. 517–18
A. Boateng, J.A. Begley, R.W. Staehle: J. Met., 1979, vol. 31 (12), pp. 56–56
W.H. Peter, R.A. Buchanan, C.T. Liu, P.K. Liaw, M.L. Morrison, J.A. Horton, C.A. Carmichael Jr., and J.L. Wright: Intermetallics, 2002, vol. 10, pp. 1157–62
M. Barbosa: Corrosion, 1988, vol. 44 (3), pp. 149–53
S. Suresh: Fatigue of Materials, 2nd ed., Cambridge University Press, Cambridge, United Kingdom, 1988
A. Shyam, W.W. Milligan: Acta Mater., 2005, vol. 53, pp. 835–44
A.C. Lloyd, J.J. Noel, S. McIntyre, and D.W. Shoesmith: Electrochimica Acta, 2004, vol. 49 (17–18), pp. 3015–27
M.P. Mueller: Met. Technol., 1982, vol. 9, pp. 235–39
S. Loi, G. Sun, V. Franz, and H.J. Butt: Phys. Rev. E, 2002, vol. 66 (3)
C.L. McBee and J. Krugher: Electrochima. Acta., 1972, vol. 17, pp. 1337–41
H.H. Strehblow: Werkst. Korr., 1976, vol. 27, p. 792
R.W. Staehle: Mater. Sci. Eng, 1976, vol. 25, pp. 207–15
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is based on a presentation given in the symposium entitled “Deformation and Fracture from Nano to Macro: A Symposium Honoring W.W. Gerberich’s 70th Birthday,” which occurred during the TMS Annual Meeting, March 12–16, 2006 in San Antonio, Texas and was sponsored by the Mechanical Behavior of Materials and Nanomechanical Behavior Committees of TMS.
Rights and permissions
About this article
Cite this article
Steward, R., Wang, G., Buchanan, R. et al. In-Situ Electrochemical Investigations of a Nickel-Based Alloy Subjected to Fatigue. Metall Mater Trans A 38, 2226–2234 (2007). https://doi.org/10.1007/s11661-007-9231-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-007-9231-5