References
Z. Marciniak and K. Kuczynski: Int. J. Mech. Sci., 1967, vol. 9, pp. 609–20.
R. Sowerby and J.L. Duncan: Int. J. Mech. Sci., 1971, vol. 13, pp. 217–29.
J.W. Hutchinson and K.W. Neale: Mechanics of Sheet Metal Forming, Plenum Press, New York, NY, 1978, pp. 111–26, 127–50, and 269–83.
K.S. Chan, D.A. Koss, and A.K. Ghosh: Metall. Trans. A, 1984, vol. 15A, pp. 323–29.
K.S. Chan: Metall. Trans. A, 1985, vol. 16A, pp. 629–39.
D.V. Wilson: Formability and Metallurgical Structure, TMS, Warrendale, PA, 1987, pp. 3–32.
M. Azrin and W.A. Backofen: Metall. Trans., 1970, vol. 1, pp. 2857–65.
D.V. Wilson, W.T. Roberts, and P.M.B. Rodrigues: Metall. Trans. A, 1981, vol. 12A, pp. 1595–1602.
D.V. Wilson and O. Acselrad: Int. J. Mech. Sci., 1985, vol. 26, pp. 573–85.
See articles in special issue on Reactivity Initiated Accidents. Nuclear Safety, 1996, vol. 37, pp. 271–395.
T.M. Link, D.A. Koss, and A.T. Motta: 1997 Int. Topical Meeting on Light Water Reactor Performance, American Nuclear Society, La Grange, IL, 1997, pp. 634–42.
T.M. Link, D.A. Koss, and A.T. Motta: Nucl. Eng. Design, 1998, vol. 186, pp. 379–94.
R. Hill: J. Mech. Phys. Solids, 1952, vol. 1, p. 19.
K.W. Neale and E. Chater: Int. J. Mech. Sci., 1980, vol. 22, pp. 563–72.
Author information
Authors and Affiliations
Additional information
This research was funded by the Nuclear Regulatory Commission under Educational Research Grant No. NRC-04-95-068.
Rights and permissions
About this article
Cite this article
Link, T.M., Koss, D.A. & Motta, A.T. Strain localization in sheet metal containing a geometric defect. Metall Mater Trans A 31, 1883–1886 (2000). https://doi.org/10.1007/s11661-006-0240-6
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-006-0240-6