References
D. Eylon, J.A. Hall, C.M. Pierce, and D.L. Ruckel: Metall. Trans. A, 1976, vol. 7A, pp. 1817–26.
D.-K. Kim, S. Lee, and H.-S. Song: Met. Mater., 1999, vol. 5, pp. 211–23.
S.L. Semiatin and T.R. Bieler: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1871–75.
H.A. Grebe, H.-R. Pak, and M.A. Meyers: Metall. Trans. A, 1985, vol. 16A, pp. 761–75.
D.-G. Lee, S. Lee, C.S. Lee, and S. Hur: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 0000–00.
H.T. Li, Y.M. Zhang, and D.Z. Yang: Mater. Sci. Eng., 2000, vol. A292, pp. 130–32.
Q. Xue, M.A. Meyers, and V.F. Nesterenko: Acta Mater., 2002, vol. 50, pp. 575–96.
H.J. Ryu, S.H. Hong, D.-K. Kim, and S. Lee: Met. Mater., 1998, vol. 4, pp. 367–71.
D.-G. Lee, S. Kim, S. Lee, and C.S. Lee: Metall. Trans. A, 2001, vol. 32A, pp. 315–24.
D.E. Grady: “Dynamic Material Properties of Armor Ceramics,” Sandia National Laboratories Report SAND91-0147.4C-704, Sandia National Laboratories, Albuquerque, NM, 1991.
M.A. Meyer: Dynamic Behavior of Materials, John Wiley & Sons Inc., New York, NY, 1994, chs. 4 and 7.
J.H. Choi and S.N. Chang: J. Kor. Inst. Met. Mater., 1999, vol. 37, pp. 1157–63.
R.G. McQueen, S.P. Marsh, J.W. Taylor, J.N. Fritz, and W.J. Carter: in High Velocity Impact Phenomena, R. Kinslow, ed., Academic Press, New York, NY, 1970, pp. 293–417.
S.N. Chang: Bull. Kor. Inst. Met. Mater., 1994, vol. 7, pp. 156–65.
M.H. Rice, R.G. McQueen, and J.M. Walsh: in Solid State Physics, F. Seitz and T. Turnbell, eds., Academic Press, 1958, vol. 6, pp. 1–63.
H. Shin: “High Speed Impact and Penetration Properties of Materials,” Technical Education Report, ADD, Daejon, Korea, 1998, chs. 5 and 14.
V.I. Romanchenko and G.V. Stepanov: J. Appl. Mech. Tech. Phys., 1981, vol. 21, pp. 555–61.
D.-G. Lee, S. Lee, and C.S. Lee: Mater. Sci. Eng., 2003, vol. A366, pp. 25–37.
C. Zhang and D. Gross: Eng. Fract. Mech., 1994, vol. 47, pp. 237–48.
W.L. Guo: Eng. Fract. Mech., 1994, vol. 49, pp. 265–75.
S.B. Biner: Acta Metall., 1994, vol. 42, pp. 3643–51.
Author information
Authors and Affiliations
Additional information
This work was financially supported by the 2000 Dual Use Technology Projects of the Agency for Defense Development and the Ministry of Science and Technology of Korea.
Rights and permissions
About this article
Cite this article
Lee, DG., Lee, Y.H., Lee, S. et al. Ultra-high-speed exploding properties of Ti-6Al-4V alloy having equiaxed and bimodal microstructures. Metall Mater Trans A 35, 719–724 (2004). https://doi.org/10.1007/s11661-004-0383-2
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-004-0383-2