Abstract
This article attempts to determine the mechanisms governing the grain growth process that occurs during lamination annealing of a cold-rolled, motor-lamination (CRML) steel. A new simulation approach linking a Monte Carlo model with electron backscatter diffraction (EBSD) scans used as input has been employed to incorporate the effects of crystallographic texture on the simulated grain growth process. The results from the texture analysis and the computer simulation of the grain growth process indicate that both stored energy driven grain growth and anisotropic grain boundary growth influence the overall grain growth occurring during lamination annealing.
Similar content being viewed by others
References
C. Antonione, L. Battezzati, A. Lucci, G. Riontino, and M.C. Tabasso: J. Mater. Sci., 1980, vol. 15, pp. 1970–35.
C. Antonione, G. Della Gatta, G. Riontino, and G. Venturello: J. Mater. Sci., 1973, vol. 8, pp. 1–10.
C. Antonione, F. Marino, G. Riontino, and M.C. Tabasso: J. Mater. Sci., 1977, pp. 747–50.
M. Hillert: Acta Metall., 1965, vol. 13, pp. 227–38.
A.D. Rollett, D.J. Srolovitz, and M.P. Anderson: Acta Metall., 1989, vol. 37 (4), pp. 1277–40.
P.A. Beck and P.R. Sperry: J. Appl. Phys., 1950, vol. 21, pp. 150–52.
B. Hutchinson, H. Magnusson, and J.-M. Feppon: 4th Int. Conf. on Recrystallization and Related Phenomena, 1999, pp. 49–58.
N. Rajmohan, Y. Hayakawa, J.A. Szpunar, and J.H. Root: Acta Mater., 1997, vol. 45 (6), pp. 2485–94.
L. Kestens and J.J. Jonas: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 155–64.
L. Kestens, J.J. Jonas, P. Van Houtte, and E. Aernoudt: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2347–58.
R. Shimizu and J. Harase: Acta Metall., 1989, vol. 37 (4), pp. 1241–49.
N. Rajmohan, J.A. Szpunar, and Y. Hayakawa: Mater. Sci. Eng., 1999, vol. A259, pp. 8–16.
L.G. Schulz: J. Appl. Phys., 1949, vol. 20, p. 1030.
S. Matthies and G.W. Vinel: Phys. State Solids B, 1961, vol. 112, pp. K111-K114.
E.A. Holm: University of Michigan, PhD Thesis, 1972.
U.F. Kocks, G.R. Canova, C.N. Tomé, A.D. Rollett, and S.I. Wright: Computer Cod LA-CC-88-6, Los Alamos National Laboratory, Los Alamos, NM, 1988a.
R.K. Ray, J.J. Jonas, and R.E. Hook: Int. Mater. Rev., 1993, vol. 39, pp. 129–72.
D. Raabe and K. Lücke: Mater. Sci. Forum, 1994, vols. 157–162, pp. 597–600.
T. Baudin and R. Penelle: ICOTOM 12, 1999, pp. 1696–700.
A.D. Rollett, D.J. Srolovitz, M.P. Anderson, and R.D. Doherty: Acta Metall. Mater., 1992, vol. 40 (12), p. 3475.
C.G. Dunn, F.C. Daniels, and M.J. Bolton: J. Met., 1950, vol. 188, p. 1245.
R. Viswanathan and C.L. Bauer: Acta. Mater., 1973 vol. 21, pp. 1099–109.
J.P. Anderson: U.S. Patent No. 5,798,001, Aug. 25, 1998.
S. Cheong, E.J. Hilinski, and A.D. Rollett: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1311–19.
T. Shimazu, M. Shiozaki, K. Kawasaki: J. Magn. Magn. Mater., 1994, vol. 133, pp. 147–49.
Y. Kurosaki and T. Shimazu: IEEE Trans. Mag., 1999, vol. 35 (5), pp. 3370–72.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cheong, S.W., Hilinski, E.J. & Rollett, A.D. Grain growth in a low-loss cold-rolled motor-lamination steel. Metall Mater Trans A 34, 1321–1327 (2003). https://doi.org/10.1007/s11661-003-0243-5
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-003-0243-5