Abstract
The effects of Au plating on joint formation and joint strength in small-scale resistance spot welding (SSRSW) of Ni sheets have been investigated using tensile-shear testing, optical microscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The results show that the mechanisms of the joint formation during the welding of Au-plated Ni sheets involve solid-state bonding, brazing, and fusion welding. The comparison between SSRSW of Au-plated Ni and bare Ni sheets and large-scale resistance spot welding (LSRSW) of Zn-coated steels is also discussed.
Similar content being viewed by others
References
Introduction to Microjoining, K.I. Johnson, ed., TWI, Abington, United Kingdom, 1985.
David Steinmeier: Weld. J., 1998, vol. 77, pp. 39–47.
K.J. Ely and Y. Zhou: Sci. Technol. Weld. Join., 2001, vol. 6 (2), pp. 63–72.
B.H. Chang, M.V. Li, and Y. Zhou: Sci. Technol. Weld. Join., 2001, vol. 6(5), pp. 273–80.
D.W. Dickinson: Welding in the Automotive Industry, Reports SG 81-5, American Iron and Steel Institute, Washington, DC, 1981.
Resistance Welding Manual, 4th ed., Resistance Welder Manufacturers’ Association, Philadelphia, PA, 1989.
Y. Zhou, P. Gorman, W. Tan, and K.J. Ely: J. Elec. Mater., 2000, vol. 29 (9), pp. 1090–99.
Y. Zhou, S.J. Dong, and K.J. Ely: J. Elec. Mater., 2001, vol. 30(8), pp. 1012–20.
Microelectronics Packaging Handbook, R.R. Tummala and E.J. Rymaszewski, eds., Van Nostrand Reinhold, New York, NY, 1989.
E. Biro, Y. Zhou, D.C. Weckman, and K.J. Ely: J. Laser Appl., 2001, vol. 13 (3), pp. 96–104.
M.R. Finlay: Resistance Spot Welding of Metallic Coated Steels and PVD Coated Electrodes, CRC No. 18, Australian Welding Research, Silverwater, NSW, Australia, Oct. 1996.
S.A. Gedeon and T.W. Eagar: Metall. Trans. B, 1986, vol. 17B, pp. 887–901.
T. Saito: Weld. Int., 1992, vol. 6 (9), pp. 695–99.
W.F. Savage: in Welding Imperfections, A.R. Pfluger and R.E. Lewis, eds., Addison-Wesley, London, 1968.
R.W. Messler, Jr.: Principles of Welding: Processes, Physics, Chemistry and Metallurgy, John Wiley & Sons, New York, NY, 1999.
K. Miyoshi: in Handbook of Micro/Nanotribology, B. Bhushan, ed., CRC Press, Boca Raton, FL, 1995, pp. 81–107.
D.R. Gaskell: Introduction to Metallurgical Thermodynamics, 2nd ed., Hemisphere Publishing Corporation, New York, NY, 1981.
Binary Alloy Phase Diagrams, T.B. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1990.
Ragnar Holm: Electric Contacts Theory and Application, Springer-Verlag, New York, NY, 1967.
P.H. Thornton, A.R. Krause, and R.G. Davies: Weld J. Res. Suppl., 1996, vol. 75 (3), pp. 101-s–108-s.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tan, W., Zhou, Y. & Kerr, H.W. Effects of au plating on small-scale resistance spot welding of thin-sheet nickel. Metall Mater Trans A 33, 2667–2676 (2002). https://doi.org/10.1007/s11661-002-0388-7
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-002-0388-7