References
J.A. Hawk, D.E. Alman, and R.D. Wilson: High Temperature Ordered Intermetallic Alloys V, Materials Research Society Symposia Proceedings, J.A. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwartz, eds., Materials Research Society, Pittsburgh, PA, 1995, vol. 364, pp. 243–48.
J.A. Hawk and D.E. Alman: Mater. Sci. Eng., 1997, vols. A239–A240, pp. 899–906.
Y.-S. Kim and J.-H. Song, and Y.W. Chang: Scripta Metall., 1997, vol. 36, pp. 829–34.
Y.-S. Kim and Y.-W. Kim: Mater. Sci. Eng., 1998, vol. A258, pp. 319–24.
S.-M. Zhu, K. Sakamoto, M. Tamura, and K. Iwasaki: Mater. Trans., 2001, vol. 42, pp. 484–90.
R.G. Baligidad and A. Radhakrishna: Mater. Sci. Eng., 2000, vol. A283, pp. 211–17.
L. Pang and K.S. Kumar: Intermetallics, 2000, vol. 8, pp. 157–63.
U. Prakash and G. Sauthoff: Scripta Metall., 2001, vol. 44, pp. 73–78.
C.T. Liu, E.H. Lee, and C.G. McKamey: Scripta Metall., 1989, vol. 23, pp. 875–80.
M. Palm and G. Inden: Intermetallics, 1995, vol. 3, pp. 443–54.
I.M. Hutchings: Tribology, Friction and Wear of Engineering Materials, Bodmin, Cornwall, 1992, pp. 22–35.
P.R. Gibson, A.J. Clegg, and A.A. Das: Wear, 1984, vol. 95, pp. 193–98.
Author information
Authors and Affiliations
Additional information
This work was supported by the New Energy and Industrial Technology Development Organization (NEDO), Japan.
Rights and permissions
About this article
Cite this article
Zhu, S.M., Guan, X.S., Shibata, K. et al. Effect of carbon addition on tribological properties of Fe-Al alloys. Metall Mater Trans A 33, 1292–1295 (2002). https://doi.org/10.1007/s11661-002-0232-0
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-002-0232-0