References
Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, and D.R. Barker: Metall. Trans. A, 1984, vol. 15A, pp. 1883–92.
H.L. Gegel: Computer Simulation in Materials Science, ASM INTERNATIONAL, Materials Park, OH, 1986, p. 291.
H.L. Gegel, J.C. Malas, S.M. Doraivelu, and V.A. Shende: Metals Handbook, ASM INTERNATIONAL, Metals Park, OH, 1988, vol. 14, pp. 417–38.
J.M. Alexander: in Modeling of Hot Deformation of Steels, J.G. Lenard, ed., Springer-Verlag, Berlin, 1989, p. 101.
Y.V.R.K. Prasad: Ind. J. Technol., 1990, vol. 28, pp. 435–51.
Hot Working Guide: A Compendium of Processing Maps, Y.V.R.K. Prasad and S. Sasidhara, eds., ASM INTERNATIONAL, Materials Park, OH, 1997.
G.E. Dieter: Metals Handbook, ASM INTERNATIONAL, Metals Park, OH, 1988, vol. 14, pp. 363–72.
S.V.S. Narayana Murty, M.S. Sarma, and B. Nageswara Rao: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1581–82.
A.K.S. Kalyan Kumar: Master’s Thesis, Indian Institute of Science, Bangalore, India, 1987.
F. Montheillet, J.J. Jonas, and K.W. Neale: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 232–35.
S. Ghosh: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2973–74.
H. Ziegler: in Progress in Solid Mechanics, I.N. Sneddon and R. Hill, eds., North-Holland Publishing Company, Amsterdam, 1963, p. 93.
H. Ziegler: An Introduction to Thermomechanics, 2nd revised ed. North-Holland Publishing Company, Amsterdam, 1983.
G.S. Murty, M.J. Koczak, and W.E. Frazier: Scripta Metall., 1987, vol. 21, pp. 141–46.
G.S. Murty and M.J. Koczak: Mater. Sci. Eng., 1988, vol. 100, pp. 37–43.
S.P. Agrawal, R.R. Boyer, and E.D. Weisert: Titanium 80, Proc. 4th Int. Conf. on Titanium, Kyoto, Japan, May 19–22, 1980, pp. 1057–67.
T.K. Ha, W.B. Lee, C.G. Park, and Y.W. Chang: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1711–13.
S.L. Semiatin and J.J. Jonas: Formability and Workability of Metals: Plastic Instability and Flow Localization, ASM, Metals Park, OH, 1984.
U.F. Kocks, J.J. Jonas, and H. Mecking: Acta Metall., 1979, vol. 27, pp. 419–32.
D. Kondepudi and I. Prigogine: Modern Thermodynamics—From Heat Engines to Dissipative Structures, John Wiley and Sons Ltd., Chichester, West Sussex, England, 1998.
S.V.S. Narayana Murty and B. Nageswara Rao: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2170–73.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ghosh, S. Interpretation of flow instability using dynamic material modeling. Metall Mater Trans A 33, 1569–1572 (2002). https://doi.org/10.1007/s11661-002-0081-x
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-002-0081-x