Abstract
Annealing after hot rolling or extrusion produces anisotropic shape changes in 18 pct Ni maraging steel. It has been observed that the material contracts along the longitudinal direction but expands perpendicular to it. This peculiar behavior has been studied in situ by means of a dilatometer. The dimensional anisotropy (DA) was found to decrease with an increase in the annealing temperature. The metallographic investigations have led to the conclusion that DA is related to the presence of banding in the material.
Similar content being viewed by others
References
A. Goldberg: J. Iron Steel Inst., 1970, pp. 289–97.
Y.R. Nemirovskiy, T.A. Doroshkevich, M.R. Nemirovskiy, N.V. Zvigintsev, and A. Kruglov: Phys. Met. Metall., 1989, vol. 68, pp. 116–24.
N.Y. Frolova, V.I. Zel dovich, and Y.I. Fillippov: Phys. Met. Metall., 1991, vol. 72, pp. 153–60.
S. Qaisar, M. Farooque, A. ul Haq, and A.Q. Khan: Proc. Solid-Solid Phase Transformation, Kyoto, Japan, May 24–28, 1999, The Japan Institute of Metals, 1999, vol. 12, part 2, pp. 1633–36.
A. Goldberg: Trans. ASM, 1969, vol. 62, pp. 219–89.
M. Farooque, S. Qaisar, A. ul Haq, and A.Q. Khan: Proc. 1st Asean Microscopy Conf., Johor, Malaysia, Nov. 27–30, 1997, A.R. Razaq et al., pp. 162–64.
P.H. Salmon Cox, B.G. Reisdorf, and G.E. Pellisier: Trans. AIME, 1967, vol. 239, pp. 1809–17.
D. Chae, D.A. Koss, A.L. Wilson, and P.R. Howell: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 995–1005.
J.B. Austin and R.H.H. Pierce: Trans. ASM, 1934, vol. 22, p. 447.
C. Wells, R.A. Ackley, and R.F. Mehl: Trans. ASM, 1936, vol. 24, p. 46.
M. Farooque, H. Ayub, A. ul Haq, and A.Q. Khan: J. Mater. Sci., 1998, vol. 33, p. 2927.
M. Ahmed, M. Farooque, F.H. Hashmi, S.W. Hussain and A.Q. Khan: in Maraging Steels, Recent Developments and Applications, Richard K. Wilson, ed., TMS-AIME, Warrendale, PA, 1988, pp. 269–82.
F. Habiby, A. ul Haq, F.H. Hashmi, and A.Q. Khan: Proc. Int. Conf. on Martensitic Transformations, The Japan Institute of Metals, 1986, pp. 560–65.
V.I. Zeldovich and N.Y. Frolova: Phys. Met. Metall., 1990, vol. 69(2), pp. 175–83.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Farooque, M., Qaisar, S., Khan, A.Q. et al. Dimensional anisotropy in 18 pct Ni maraging steel. Metall Mater Trans A 32, 1057–1061 (2001). https://doi.org/10.1007/s11661-001-0116-8
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-001-0116-8