Abstract
The theoretical energy consumption(TEC) analytical methods and the calculated models for the electrolytic and thermal reduction metal separation processes have been put forward based on thermodynamics and physical chemistry principles, providing theoretical foundation for choosing the optimum metal separation methods. Based on the models, the TECs of the Mg separation processes are taken as an example, and have been calculated and analyzed contrastively, including the MgCl2 electrolytic method, the MgO electrolytic method with inert electrode and with carbon anode, and the silicothermic method. It is shown that the thermal method is more reasonable than the electrolytic methods to separate Mg under low efficiency of coal power generation.
Similar content being viewed by others
References
Xia De-hong, Deng Na, Chang Qing-qing. Entropy generation in mixing process of fuel gases and their utilization [J]. Iron and Steel, 2008, 43(6): 82–84.
Wang Ping-yan, Yang Bu-zheng, Dai Yong-nian, Liu Yong-cheng. Study on vacuum kiln for production of aluminum from aluminum-bearing materials by carbothermic reduction -chlorination [J]. Journal of Kunming university of science and technology, 2005, 30(6): 21–33.
Shekhovtsov G., Shcheqolev V., Devyatkin V, Magnesium electrolytic production process. Magnesium Technology 2000. Nashville, TN, USA.
Chen Z, Farthing T W, Fray D J. Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride[J]. Nature, 2000(407): 361–364.
Ye Da-lun, Hu Jian-hua. Handbook of Thermodynamic Data [M]. Beijing: Metallurgy Industry Press, 2001.
Ihsan · Barron. Thermochemical Data of Pure Substances [M]. Beijing: Science Press, 2003.
Liang Pei, Liang Yitian. The magnesium hydroxide electrolytic method [J]. Light metal, 2007(6): 50–51.
Li Huaqing, Xie Shuisheng. Research on Development of Dolomite-Ferrosilicon Thermal Reduction Process of Magnesium Production [J]. Journal of rare earths, 2005 (23): 606–610.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Xia, D., Shang, Y., Ren, L. et al. Theoretical energy consumption analytical method for metal separation process. J. Therm. Sci. 19, 377–382 (2010). https://doi.org/10.1007/s11630-010-0397-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11630-010-0397-6