Abstract
Plant roots mechanically enhance the strength of soil and improve slope stability through anchoring. Given the popularization of ecological slope-protection technology, a quantitative study of how roots help to anchor soil is highly pertinent. The object of the present study is thus to investigate how roots and soil combine to affect the mechanical properties of the root-soil interface. Toward this end, pullout experiments of cedar roots of different diameters in soils of different density were conducted. The experimental results show that the maximum pullout force increases significantly with increasing root diameter, but only slightly increases with increasing soil density, which indicates that the root diameter has a greater impact on the maximum pullout force than soil density. Next, based on studies of fiber-reinforced composites, a root-soil pull-out model was proposed to study the evolution of shear stress on root-soil interface. This approach ensures that the model accurately reflects the dynamic stress distribution evolution at the root-soil interface and can calculate the pullout process of embedded root from soil. The accuracy of the model is verified by comparing the calculated results with experimental results. Finally, how soil density and root diameter affect the anchoring force was analyzed. The results indicate that the maximum anchoring force increases linearly with increasing root diameter, but nonlinearly with increasing soil density until reaching a fixed value. These results show that the root soil pull-out model has significant practical value in slope protection.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Abe K, Ziemer RR (1991) Effect of tree roots on a shear zone: modeling reinforced shear stress. Revue Canadienne De Recherche Forestière 21(7): 1012–1019. https://doi.org/10.1139/x91-139
Bischetti GB, Chiaradia EA, Epis T, et al. (2009) Root cohesion of forest species in the Italian Alps. Plant and Soil 324(1–2)71–89. https://doi.org/10.1007/s11104-009-9941-0
Chiatante D, Beltotto M, Onelli E, et al. (2010) New branch roots produced by vascular cambium derivatives in woody parental roots of Populus nigral. Plant Biosystems 144(2): 420–433. https://doi.org/10.1080/11263501003718612
Cohen D, Schwarz M, Or D (2011) An analytical fiber bundle model for pullout mechanics of root bundles. Journal of Geophysical Research 116(F3): F03010.
Coppin NJ and Richards IJ (1990) Use of vegetation in civil engineering. CIRIA, Butterworths, London.
Coutts MP. (1983) Root architecture and tree stability. Plant Soil 71: 171–188.
Cucchi V and Bert D (2003) Wind-firmness in Pinus pinaster Ait. stands in Southwest France: influence of stand density, fertilisation and breeding in two experimental stands damaged during the 1999 storm. Annals of Forest Science 60(3): 209–226. https://doi.org/10.1051/forest:2003013
Cunha VMCF, Barros J, Cruz JS (2008) Bond-Slip Mechanisms of Hooked-End Steel Fibers in Self-Compacting Concrete. Materials Science Forum 587–588: 877–881. https://doi.org/10.4028/www.scientific.net/MSF.587-588.877
Ekanayake JC and Phillips CJ (1999) A method for stability analysis of vegetated hillslopes: an energy approach. Canadian Geotechnical Journal 36(6): 1172–1184.
Ferguson PM and Thompson JN (1962) Development length of high strength reinforcing bars in bon. ACI Journal 59(7): 887–922.
Forbes K, Bischetti JB, Brardinoni GB, et al. (2011) Forests and landslides: The role of trees and forests in the prevention of landslides and rehabilitation of landslide-affected areas in Asia. Food and Agriculture Organization of the United Nations Regional Office for Asia and the Pacific, Bangkok.
Giadrossich F, Schwarz M, Cohen D, et al. (2013) Mechanical interactions between neighbouring roots during pullout tests. Plant and Soil 367(1–2): 391–406. https://doi.org/10.1007/s11104-012-1475-1
Guthrie RH, Hockin A, Colquhoun L, et al. (2010) An examination of controls on debris flow mobility: Evidence from coastal British Columbia. Geomorphology 114(4): 601–613. https://doi.org/10.1016/j.geomorph.2009.09.021
Huang RQ (2003) Large-scale landslides and their sliding mechanisms in china since the 20th century. Chinese Journal of Rock Mechanics and Engineering 26(3): 433–454. (In Chinese)
Ji XD, Xu C, Dai XQ, et al. (2018) Studying the mechanical properties of the soil-root interface using the pullout test method. Journal of Mountain Science 15(4): 882–893. https://doi.org/10.1007/s11629-015-3791-4
Ji XD, Song YP, Liu Y (2008) Effect of freeze-thaw cycles on bond strength between steel bars and concrete. Journal of Wuhan university of technology-materials science edition 23(4): 584–588.
Ji XD, Chen LH, Zhang A (2017) Anchorage properties at the interface between soil and roots with branches. Journal of Forestry Research 28(1): 83–93. https://doi.org/10.1007/s11676-016-0294-2
Li YX, Bielak J, Hegger J, et al. (2018) An incremental inverse analysis procedure for identification of bond-slip laws in composites applied to textile reinforced concrete. Composites Part B Engineering 137: 111–122. https://doi.org/10.1016/j.compositesb.2017.11.014
Loades KW, Bengough AG, Bransby MF, et al. (2010) Planting density influence on fibrous root reinforcement of soils. Ecological Engineering 36(3): 276–284. https://doi.org/10.1016/j.ecoleng.2009.02.005
Menzel CA (1939) Some factors influencing results of pull-out bond tests. ACI Journal 35: 517–542.
Mickovski SB and Ennos AR (2003) Model and whole-plant studies on the anchorage capabilities of bulbs. Plant and Soil 255(2): 641–652. https://doi.org/10.1023/A:1026007229517
Mickovski SB, Bengough AG, Bransby MF, et al. (2007) Material stiffness, branching pattern and soil matric potential affect the pullout resistance of model root systems. European Journal of Soil Science 58(6): 1471–1481. https://doi.org/10.1111/j.1365-2389.2007.00953.x
Mickovski SB, Hallett PD, Bransby MF, et al. (2009) Mechanical Reinforcement of Soil by Willow Roots: Impacts of Root Properties and Root Failure Mechanism. Soil Science Society of America Journal 73(4): 1276–1285. https://doi.org/10.2136/sssaj2008.0172
Naaman AE, Namur GG, Alwan JM, et al. (1991) Fiber pullout and bond slip. I: Analytical study. Journal of Engineering Structures 117(9): 2769–2790.
Nicoll BC, Gardiner BA, Rayner B, et al. (2006) Anchorage of coniferous trees in relation to species, soil type, and rooting depth. Canadian Journal of Forest Research 36(7): 1871–1883. https://doi.org/10.1139/x06-072
Norris JE (2005) Root reinforcement by hawthorn and oak roots on a highway cut slope in Southern England. Plant Soil 278: 43–53. https://doi.org/10.1007/s11104-005-1301-0
Norris JE, Stokes A, Mickovski SB, et al. (2008) Slope stability and erosion control: ecotechnological solutions. Springer, Dordrecht.
Pollen N and Simon A (2005) Estimating the mechanical effects of riparian vegetation on stream bank stability using a fiber bundle model. Water Resources Research 41(W). https://doi.org/10.1029/2004WR003801
Pollen N and Simon A (2009) Enhanced application of root-reinforcement algorithms for bank-stability modeling. Earth Surface Processes and Landforms 34(4): 471–480. https://doi.org/10.1002/esp.1690
Radi E, Lanzoni L, Sorzia A et al. (2015) Analytical Modelling of the Pullout Behavior of Synthetic Fibres Treated with Nanosilica. Procedia Engineering 109: 525–532. https://doi.org/10.1016/j.proeng.2015.06.260
Schiechtl HM (1980) Bioengineering for land reclamation and conservation. University of Alberta Press.
Schwarz M, Preti F, Giadrossich F, et al. (2009) Quantifying the role of vegetation in slope stability: A case study in Tuscany (Italy). Ecological Engineering 36: 285–291. https://doi.org/10.1016/j.ecoleng.2009.06.014
Schwarz M, Cohen D, Or D (2010) Root-soil mechanical interactions during pullout and failure of root bundles. Journal of Geophysical Research Earth Surface 115(F). https://doi.org/10.1029/2009JF001603
Schwarz M, Cohen D, Or D (2011) Pullout tests of root analogs and natural root bundles in soil: experiments and modeling. Journal of Geophysical Research Earth Surface 116 (F). https://doi.org/10.1029/2010JF001753
Thomas RE and Pollen-Bankhead N (2010) Modeling root-reinforcement with a fiber-bundle model and Monte Carlo simulation. Ecological Engineering 36(1): 47–61. https://doi.org/10.1016/j.ecoleng.2009.09.008
Tian QQ (2014) Experimental Study on the Mechanical Properties of Root-soil Complex Which is Mixed with Forest and Grass. Master thesis, Central South University of Forestry and Technology, Changsha, Hunan. (In Chinese)
Waldron LJ, Dakessian S (1981) Soil Reinforcement by Roots: Calculation of Increased Soil Shear Resistance From Root Properties. Soil Science 132(6): 427–435.
Wu TH, Mckinnell WP, Swanston DN (1979) Strength of tree roots and landslides on Prince of Wales Island, Alaska. Canadian Geotechnical Journal 16(1): 19–33
Xie QJ, Zhu ZW, Kang GZ (2019) Thermal activation based constitutive model for high-temperature dynamic deformation of AZ31B magnesium alloy. Materials Science and Engineering: A 743: 24–31. https://doi.org/10.1016/j.msea.2018.11.049
Acknowledgments
This study has been financially supported by the National Natural Science Foundation of China (41790432), the NSFC-ICIMOD joint project (41761144077), the “Belt & Road” international cooperation team project of CAS (Su Li-jun).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Su, Lj., Hu, Bl., Xie, Qj. et al. Experimental and theoretical study of mechanical properties of root-soil interface for slope protection. J. Mt. Sci. 17, 2784–2795 (2020). https://doi.org/10.1007/s11629-020-6077-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11629-020-6077-4