Abstract
This paper proposes a horizontal displacement-based approach to determine the potential slip surface of the slope. Firstly, a group of in-situ inclinometers with an appropriate spacing in the horizontal direction is located in the model slope. The equation of horizontal displacement with time for each in-situ inclinometer is fitted during the whole simulation process. Furthermore, the intersection of each inclinometer with potential slip surface is determined by using an optimization model. The slip surface can be obtained by using least square fitting method. Finally, the feasibility and accuracy of the method are validated by a series of numerical simulations. It is noted that the optimization model taking the maximum value of displacement increment gradient as an objective has higher accuracy when compared with other optimization models. This method employed in this study provides a preliminary approach to determine the real-time slope stability based on displacement, which can also be measured by using conventional instruments on site.
Similar content being viewed by others
References
Anthony TC Goh (1999) Genetic algorithm search for critical slip surface in multiple-wedge stability analysis. Canadian Geotechnical Journal 36(2): 382–391. https://doi.org/10.1139/t98-110
Bai T, Song ZG, Zhang DY (2017) Locating Global critical slip surface using the Morgenstern-Price method and simulated annealing algorithm. 2017 International Conference on Transportation Infrastructure and Materials (ICTIM 2017). https://doi.org/10.12783/dtmse/ictim2017/9984
Borana L, Yin JH, Singh DN, et al. (2016) Influences of Initial Water Content and Roughness on Skin Friction of Piles Using FBG Technique. International Journal of Geomechanics 17(4). https://doi.org/10.1061/(ASCE)GM.1943-5622.0000794.
Cheng YM (2003) Location of critical failure surface and some further studies on slope stability Analysis. Computers and Geotechnics 30(3): 255–267. https://doi.org/10.1016/S0266-352X(03)00012-0
Cheng YM, Lansivaara T, Wei WB (2007) Two-dimensional slope stability analysis by limit equilibrium and strength reduction methods. Computers and Geotechnics 34(3): 137–150. https://doi.org/10.1016/j.compgeo.2006.10.011
Cheng YM, Li L, Lansivaara T, et al. (2008) An improved harmony search minimization algorithm using different slip surface generation methods for slope stability analysis. Engineering Optimization 40(2): 95–115. https://doi.org/10.1080/03052150701618153
Dick GJ, Eberhardt E, Cabrejo-Liévano AG, et al. (2015) Development of an early-warming time-of-failure analysis methodology for openpit mine slopes utilizing ground-based slope stability radar monitoring data. Canadian Geotechnical Journal 52(4): 515–529. https://doi.org/10.1139/cgj-2014-0028
Feng DM, Feng MQ (2017) Experimental validation of costeffective vision-based structural health monitoring. Mechanical Systems and Signal Processing 88(1): 199–211. https://doi.org/10.1016/j.ymssp.2016.11.021
Garcia UE, Axelsson K (2015) Rainfall thresholds for the occurrence of urban landslide in Tegucigalpa, Honduras: an application of the critical rainfall intensity. Swedish Society for Anthropology and Geography 97(1): 61–83. https://doi.org/10.1111/geoa.12092
Huang ZH, Zhao HB (2016) Tabu search for critical non-circular slip surface in slope stability analysis. International Journal of Computer Aided Engineering and Technology 8(4). https://doi.org/10.1504/IJCAET.2016.079388.
Katsuhiko A, Keiichi T (1985) Determination of noncircular slip surface giving the minimum factor of safety in slope stability analysis. Soils and Foundations 25(1): 43–51. https://doi.org/10.3208/sandf1972.25.43
Khajehzadeh M, Taha MR, Shafie AE, et al. (2012) A modified gravitational search algorithm for slope stability analysis. Engineering Applications of Artificial Intelligence 25(8): 1589–1597. https://doi.org/10.1016/j.engappai.2012.01.011
Kim SK, Pakzad S, Culler D, et al. (2007) Health monitoring of civil infrastructures using wireless sensor networks. Proceedings of the 6th international conference on Information processing in sensor networks. Massachusetts, USA. pp 254–263.
Lu KL, Zhu DY (2014) Theoretical and experimental study of effect of slope topography on its stability. Chinese Journal of Rock Mechanics and Engineering 33(1): 35–42. (In Chinese) https://doi.org/10.13722/j.cnki.jrme.2014.01.004
Macciotta R, Hendry M, Martin CD (2016) Developing an early warning system for a very slow landslide based on displacement monitoring. Natural Hazards 81(2): 887–907. https://doi.org/10.1007/s11069-015-2110-2
Malkawi AH, Hassan WF, Sarma SK (2001) Global search method locating general slip surface using Monte Carlo technology, Journal of Geotechnical and Geoenvironmental Engineering 127(8): 688–698. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:8(688)
Morgenstern NR, Price VE (1965) The analysis of the stability of general slip surfaces. Géotechnique 15(1): 79–93. https://doi.org/10.7939/R3JS9HF63
Pei HF, Cui P, Yin JH, et al. (2011) Monitoring and warning of landslides and debris flows using an optical fiber sensor technology. Journal of Mountain Science 8: 728–738. https://doi.org/10.1007/s11629-011-2038-2
Pei HF, Yin JH, Zhu HH, et al. (2010) In-situ monitoring of displacements and stability evaluation of slope based on fiber Bragg grating sensing technology. Chinese Journal of Rock Mechanics and Engineering 29(8): 1570–1576. (In Chinese)
Petley D (2012) Global patterns of loss of life from landslides. Geology 40(10): 927–930. https://doi.org/10.1130/G33217.1
Ramsay, JO, Silverman, BW (2006) Functional Data Analysis. Science Publishing Company, Beijing, China.
Su LJ, Xu XQ, Geng XX, et al. (2017) An integrated geophysical approach for investigating hydro-geological characteristics of a debris landslide in the Wenchuan Earthquake Area. Engineering Geology 219(9): 52–63. https://doi.org/10.1016/j.enggeo.2016.11.020
Sun GH, Zheng H, Li CG (2008) Searching critical slip surface of slopes based on equivalent plastic strain. Rock and Soil Mechanics 29(5): 1160–1163. (In Chinese) https://doi.org/10.16285/j.rsm.2008.05.052
Sun GH, Zheng H, Li CG (2010) Searching critical slip surface of three-dimensional slopes based on equivalent plastic strain. Rock and Soil Mechanics 31(2): 627–632. (In Chinese) https://doi.org/10.16285/j.rsm.2010.02.028
Xu DS, Dong L, Borana L, et al. (2017) Early-warning system with quasi-distributed fiber optic sensor networks and cloud computing for soil slopes. IEEE Acess 5: 25437–25444. https://doi.org/10.1109/ACCESS.2017.2771494.
Xu XQ, Su LJ, Zhang GD, et al. (2017) Analysis on shear wave velocity structure of a gravel landslide based on dual-source surface wave method. Landslides 14(3): 1127–1137. https://doi.org/10.1007/s10346-016-0780-9
Xu X Q, Su L J, Liu C (2016) The spatial distribution characteristics of shallow fissures of a landslide in the Wenchuan earthquake area. Journal of Mountain Science 35(21): 544–1557. https://doi.org/10.1007/s11629-015-3487-9.
Xu WJ, Xu Q, Wang YJ (2013) The mechanism of high-speed motion and damming of the Tangjiashan landslide. Engineering Geology 157: 8–20. https://doi.org/10.1016/j.enggeo.2013.01.020.
Xu WJ, Jie YX. Li QB, et al. (2014) Genesis, mechanism and stability of the Dongmiaojia landslide, Yellow River, China. International Journal of Rock Mechanics and Mining Sciences 67: 57–68. https://doi.org/10.1016j.ijrmms.2014.01.010.
Zhu HH, Yin JH, Jin W, et al. (2010) Research of foundation health monitoring based on FBG sensing technology. China Civil Engineering Journal 43(6): 109–115. (In Chinese) https://doi.org/10.15951/j.tmgcxb.2010.06.015
Zhu HH, Ho ANL, Yin JH, et al. (2012) An optical fiber monitoring system for evaluating the performance of a soil nailed slop. Smart Structures and Systems 9(5): 393–410. https://doi.org/10.12989/sss.2012.9.5.393
Acknowledgements
This research was supported by National Natural Science Foundation of China (Grants No. 51408148, No. 51778107, No.41572252, and No.51639002).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pei, Hf., Zhang, Sq., Borana, L. et al. Development of a preliminary slope stability calculation method based on internal horizontal displacements. J. Mt. Sci. 15, 1129–1136 (2018). https://doi.org/10.1007/s11629-017-4652-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11629-017-4652-0