Skip to main content
Log in

Influence of Rubber Powder Movement on Properties of Asphalt Rubber from the Mesoscopic View

  • Advanced Materials
  • Published:
Journal of Wuhan University of Technology-Mater. Sci. Ed. Aims and scope Submit manuscript

Abstract

The research on asphalt performance mainly focused on the macro performance and micro mechanism. Mesoscopic analysis was introduced to study the effect of rubber powder movement on asphalt rubber properties. After the preparation parameters and the preparation process of asphalt rubber were determined, the modification mechanism and rheological properties were analyzed which revealed the compatible stability mechanism. Then, the analysis model of asphalt rubber was established to focus on simulating the effect of rubber powder and the spatial movement on its mechanical properties. The experimental results show that rubber powder can make the asphalt rubber bear more uniform stress distribution and enhance the ability to resist deformation. Meanwhile, the rotational motion and final distribution of rubber powder have an obvious impact on the mechanical properties of asphalt rubber. In the selected feature points, the average stress of rubber powder at 0° space angle is only 34.1% of that at 90° space angle. When the rubber powders are all in parallel in the ideal state, it enhances the mechanical properties the most. This study supplements the “mesoscopic” scale between macro and micro research. The relationship between micro mechanism and macro properties of asphalt rubber will be established from the mesoscopic perspective. It is also an effort to realize the effective correlation from micro, mesoscopic to macro in asphalt.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

References

  1. Mullaney J, Lucke T, Practical Review of Pervious Pavement Designs[J]. Clean-Soil, Air, Water, 2014, 42(2): 111–124

    Article  CAS  Google Scholar 

  2. Li H, Zhang F, Feng Z, et al. Study on Waste Engine Oil and Waste Cooking Oil on Performance Improvement of Aged Asphalt and Application in Reclaimed Asphalt Mixture[J]. Construction and Building Materials, 2021, 276: 122138

    Article  CAS  Google Scholar 

  3. Li H, Feng Z, Ahmed T A, et al. Repurposing Waste Oils into Cleaner Aged Asphalt Pavement Materials: Acritical Review[J]. Journal of Cleaner Production, 2022, 334: 130 230

    Article  CAS  Google Scholar 

  4. Kaloush KE. Asphalt Rubber: Performance Tests and Pavement Design Issues[J]. Construction and Building Materials, 2014, 67: 258–264

    Article  Google Scholar 

  5. Wang L, Chang C, Xing Y, Creep Characteristics of Crumb Rubber Modified Asphalt Binder[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2011, 26(1): 118–120

    Article  CAS  Google Scholar 

  6. Li H, Dong B, Zhao D, et al. Physical, Rheological and Stability Properties of Desulfurized Rubber Asphalt and Crumb Rubber Asphalt[J]. Arabian Journal for Science and Engineering, 2019, 44: 5 043–5 056

    Article  CAS  Google Scholar 

  7. Li H, Feng Z, Liu H, et al. Performance and Inorganic Fume Emission Reduction of Desulfurized Rubber Powder/Styrene-butadiene-styrene Composite Modified Asphalt and Its Mixture[J]. Journal of Cleaner Production, 2022, 364: 132 690

    Article  CAS  Google Scholar 

  8. Sienkiewicz M, Borzędowska-Labuda K, Zalewski S, et al. The Effect of Tyre Rubber Grinding Method on the Rubber-asphalt Binder Properties[J]. Construction and Building Materials, 2017, 154: 144–154

    Article  Google Scholar 

  9. Pais J, Presti DL, Santos C, et al. The Effect of Prolonged Storage Time on Asphalt Rubber Binder Properties[J]. Construction and Building Materials, 2019, 210: 242–255

    Article  Google Scholar 

  10. Souliman MI, Gc H, Isied M, et al., Mechanistic Analysis and Cost-effectiveness Evaluation of Asphalt Rubber Mixtures[J]. Road Materials and Pavement Design, 2020, 21(sup1): S76–S90

    Article  CAS  Google Scholar 

  11. Soleimani SM, Faheiman A, Mowaze Z, The Effects of Using Crumb Rubber Modified Binder in an Asphalt Pavement[J]. American Journal of Engineering and Applied Sciences, 2020, 13(2): 237–253

    Article  Google Scholar 

  12. Fontes LP TL, Trichês G, Pais JC, et al., Evaluating Permanent Deformation in Asphalt Rubber Mixtures[J]. Construction and Building Materials, 2010, 24(7): 1 193–1 200

    Article  Google Scholar 

  13. Li H, Cui C, Temitope A A, et al., Effect of SBS and Crumb Rubber on Asphalt Modification: A Review of the Properties and Practical Application[J]. Journal of Traffic and Transportation Engineering (English Edition), 2022, 9(5): 836–863

    Article  Google Scholar 

  14. Hesp S, Terlouw T, Vonk WC. Low Temperature Performance of SBS-modified Asphalt Mixes[J]. Asphalt Paving Technology, 2000, 69: 540–573

    CAS  Google Scholar 

  15. Kök BV, Yilmaz M, Geçkil A, Evaluation of Low-temperature and Elastic Properties of Crumb Rubber-and SBS-Modified Bitumen and Mixtures[J]. Journal of Materials in Civil Engineering, 2013, 25(2): 257–265

    Article  Google Scholar 

  16. Jeong KD, Lee SJ, Amirkhanian SN, et al., Interaction Effects of Crumb Rubber Modified Asphalt Binders[J]. Construction and Building Materials, 2010, 24(5): 824–831

    Article  Google Scholar 

  17. Li H, Zhang C, Zou X, et al., Analysis of the Rheological Performance of Composite Asphalt Rubber and the Influence of Gradation Types on its Mixture Prepared under the Optimal Specifications[J]. International Journal of Pavement Research and Technology, 2022, 15(3): 659–675

    Article  Google Scholar 

  18. Wen Y, Liu Q, Chen L, et al. Review and Comparison of Methods to Assess the Storage Stability of Terminal Blend Rubberized Asphalt Binders[J]. Construction and Building Materials, 2020, 258: 119586

    Article  CAS  Google Scholar 

  19. Sun H, Zhang T, Li J, et al., Study on Mass Transfer in Cathode Diffusion Layer of HT-PEM Fuel Cell at Meso-scale[J]. Journal of Shenyang Jianzhu University (Natural Science), 2019, 35(3): 519–525

    CAS  Google Scholar 

  20. Seaton MA, DL_MESO_DPD: Development and Use of Mesoscale Modelling Software[J]. Molecular Simulation, 2021, 47(2–3): 228–247

    Article  CAS  Google Scholar 

  21. Groot RD, Warren PB, Dissipative Particle Dynamics: Bridging the Gap between Atomistic and Mesoscopic Simulation[J]. The Journal of Chemical Physics, 1997, 107(11): 4 423–4 435

    Article  CAS  Google Scholar 

  22. Zhang S, Sun L, Xu J, et al., Aggregate Structure in Heavy Crude Oil: Using a Dissipative Particle Dynamics Based Mesoscale Platform[J]. Energy and Fuels, 2010, 24(8): 4 312–4 326

    Article  CAS  Google Scholar 

  23. Ren Q, Dai Z, Zhou H, Mesoscale Simulation on Colloidal Structures of Heavy Oil[J]. Acta Petrol Sinica (Petroleum Processing Section), 2013, 29(1): 86–94

    CAS  Google Scholar 

  24. Alvarez F, Flores EA, Castro LV, et al., Dissipative Particle Dynamics (DPD) Study of Crude Oil-Water Emulsions in the Presence of a Functionalized Co-polymer[J]. Energy and Fuels, 2011, 25(2): 562–567

    Article  CAS  Google Scholar 

  25. Li H, Yang F, Zhang F, et al., Diffusion and Regeneration Mechanism of Waste Composite Oils Rejuvenator in Aged Asphalt[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2021, 36(5): 664–671

    Article  CAS  Google Scholar 

  26. Gedik A. An Exploration into the Utilization of Recycled Waste Glass as a Surrogate Powder to Crushed Stone Dust in Asphalt Pavement Construction[J]. Construction and Building Materials, 2021, 300: 123980

    Article  Google Scholar 

  27. Al-Sabaeei AM, Napiah M, Sutanto M, et al. Physicochemical, Rheological and Microstructural Properties of Nano-silica Modified Bio-as-phalt[J]. Construction and Building Materials, 2021, 297: 123772

    Article  CAS  Google Scholar 

  28. Liu H, Zhang M, Jiao Y, et al. Preparation Parameter Analysis and Optimization of Sustainable Asphalt Binder Modified by Waste Rubber and Diatomite[J]. Advances in Materials Science and Engineering, 2018, 2018: 1–14

    Article  Google Scholar 

  29. Harnaeni SR, Pramesti FP, Budiarto A, et al., Study on Structural Performance of Asphalt Concrete and Hot Rolled Sheet Through Viscoelastic Characterization[J]. Materials, 2020, 13(5): 1 133

    Article  CAS  Google Scholar 

  30. Chen J, Huang M, Wang X, et al., Typical Constitutive Models of Rubber Materials and Their Ranges of Application[J]. Materials Reports, 2015, 29(S1): 118–120

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Haibin Li  (李海滨).

Additional information

Funded by the Key Research and Development Projects in Shaanxi Province (2022SF-328), the Science and Technology Project of Henan Department of Transportation (2020J-2-3), and the Science and Technology Project of Shaanxi Department of Transportation (Nos.19-10K and 19–28K)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Li, H., Hu, Y., Shi, X. et al. Influence of Rubber Powder Movement on Properties of Asphalt Rubber from the Mesoscopic View. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 38, 312–324 (2023). https://doi.org/10.1007/s11595-023-2700-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11595-023-2700-x

Key words

Navigation