Abstract
Ba0.6Sr0.4TiO3 ceramic was synthesized by the sol-gel method combined with the solidstate reaction. Phase composition and microstructure analyses indicate that pure BST phase with aggregated nanograins can be achieved. The dielectric properties change with sintering temperature, and reach the maximum at suitable temperatures. The highest dielectric constant of 4351 is obtained at 100 Hz for 1 275 ℃ sintered sample that is 2 times greater than that of the original sample, which indicates the dielectric properties can be modulated by grain size and density. The results show that Ba0.6Sr0.4TiO3 is a promising candidate for microwave applications.
Similar content being viewed by others
References
Chang W, Sengupta L. MgO-mixed Ba0.6Sr0.4TiO3 Bulk Ceramics and Thin Films for Tunable Microwave Applications[J]. Journal of Applied Physics, 2002, 92: 3 941-3 945
Wang JY, Yao X. Preparation and Dielectric Characterization of Ba1-x SrxTiO3 Ceramics by Sol-gel Technique[J]. Journal of Functional Materials, 2007, 38(3): 389–392
Wang X, Huang R, Zhao Y, et al. Dielectric and Tunable Properties of Zr Doped BST Ceramics Prepared by Spark Plasma Sintering[J]. Journal of Alloys and Compounds, 2012, 533: 25–28
Li Y, Qu Y. Dielectric Properties and Substitution Mechanism of Samarium-doped Ba0.68Sr0.32TiO3 Ceramics[J]. Mater. Res. Bull., 2009, 44(1): 82–85
Costa LC, Aoujgal A, Graca M, et al. Microwave Dielectric Properties of the System Ba1-xSrxTiO3[J]. Physica B, 2010, 405: 3 741–3 744
Mudinepalli VR, Feng L, Lin WC, et al. Effect of Grain Size on Dielectric and Ferroelectric Properties of Nanostructured Ba0.8Sr0.2TiO3 Ceramics[J]. Journal of Advanced Ceramics, 2015, 4(1): 46–53
Liu C, Liu P. Microstructure and Dielectric Properties of BST Ceramics Derived from High-energy Ball-milling[J]. Journal of Alloys and Compounds, 2014, 584: 114–118
Li Y, Wu S, Wang G, et al. Phase Structure and Dielectric Properties of Doped BaTiO3 Ceramics[J]. Journal Wuhan University of Technology -Materials Science Edition, 2007, 22(3): 522–525
Zhang C, Xiao JN, Xu XJ. Effects of Dy2O3 on the Structure and Dielectric Properties of Barium Strontium Titanate Based Ceramics[J]. Piezoelectrics and Acoustooptics, 2012, 34(6): 898–901
Zhang D, Button T, Alexander K, et al. Effects of Glass Additions on the Microstructure and Dielectric Properties of Barium Strontium (BST) Ceramics[J]. Journal of the European Ceramic Society, 2010, 30: 407–412
Zhang J, Lui J, Wu W, et al. Study on Y3+-doped Barium Strontium Titanate with High Dielectric Constant and Low Dielectric Loss[J]. Chinese Rare Earths, 2017, 38(3): 9–15
Wang X, Li Z, Chen F, et al. Improved Breakdown Strength in (Ba0.6Sr0.4)0.85Bi0.1TiO3 Ceramics with Addition of CaZrO3 for Energy Storage Application[J]. Journal Wuhan University of Technology -Materials Science Edition, 2018, 33(3): 545–551
Selvam P, Ashita PA, Kumar V. Novel Synthesis of Nanocrystalline (Ba1-xSrx)TiO3[J]. Ferroelectrics, 2005, 324: 31–35
Mao C, Yan S, Cao S, et al. Effect of Grain Size on Phase Transition, Dielectric and Pyroelectric Properties of BST Ceramics[J]. Journal of the European Ceramic Society, 2014, 34: 2 933–2 939
Hornebecq V, Huber C, Maglione M, et al. Dielectric Properties of Pure (BaSr)TiO3 and Composites with Different Grain Sizes Ranging from the Nanometer to the Micrometer[J]. Advanced Functional Materials, 2004, 14: 899–904
Liou YC, Wu CT. Synthesis and Diffused Phase Transition of Ba0.7Sr0. 3TiO3 Ceramics by a Reaction-sintering Process[J]. Ceramics International, 2008, 34: 517–522
Song Z, Liu H, Zhang S, et al. Effect of Grain Size on the Energy Storage Properties of (Ba0.4Sr0.6)TiO3 Paraelectric Ceramics[J]. Journal of the European Ceramic Society, 2014, 34: 1 209–1 217
Feng H. Preparation of Ba0.55Sr0.4Ca0.05TiO3 Powders by Chemical Co-Precipitation for Low Temperature Sintering Ferroelectric Ceramics[J]. Integrated Ferroelectrics, 2011, 129(1): 95–101
Jin Q, Pu Y, Wang C, et al. Microstructure, Dielectric Properties and Energy Storage Performance of Ba0.4Sr0.6TiO3 Ceramics Prepared by Hydrothermal Method and Microwave Sintering[J]. Materials Letters, 2017, 188: 159–161
Velu G, Carru JC, Cattan E, et al. Deposition of Ferroelectric BST Thin Films by Sol Gel Route in View of Electronic Applications[J]. Ferroelectrics, 2011, 288(1): 59–69
Zhang Y, Zhan B, Su Y, et al. Preparation and Characterization of Barium Strontium Titanate Powders[J]. China Ceramic Industry, 2017, 24(2): 14–18
Xiao S, Hu J, Xu H, et al. The Calculation of the Optimum pH Range for Synthesizing BST Nanopowders by Sol-gel Auto-combustion Process[J]. J. Sol-Gel Sci. Technol., 2009, 49: 166–169
Nasir A, Mahwish B, Shafaq B, et al. Structural and Optical Properties of Zirconia Thin Films[J]. Materials Today: Proceedings, 2015, 2: 5 771–5 776
Kingery WD, Bowen HK, Uhlmann DR. Introduction to Ceramics[M]. New York: John Wiley & Sons Inc, 1976
Author information
Authors and Affiliations
Corresponding author
Additional information
Funded by the National Natural Science Foundation of China (No. 51702299)
Rights and permissions
About this article
Cite this article
Zhang, Y., Zhan, B. & Wang, X. Effect of Sintering Temperature on Low Frequency Response Properties of Ba0.6Sr0.4TiO3 Ceramic. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 34, 1360–1364 (2019). https://doi.org/10.1007/s11595-019-2199-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11595-019-2199-3