Advertisement

Low-frequency internal friction behaviour of Zr55Al10Ni5Cu30 metallic glass with different quenching temperatures

  • Zhizhi Wang (王知鸷)Email author
  • Dong Wang
  • Peng Jiang
  • Wangping Wu
  • Xiaoyan Li
  • Fangqiu Zu
  • Jiapeng Shui
Metallic materials
  • 48 Downloads

Abstract

The correlation between the internal friction behaviour of Zr55Al10Ni5Cu30 BMG samples and their quenching temperatures was investigated. It was found that, below the glass transition temperature, the activation energy decreased with increasing quenching temperature, but in the surpercooled liquid region the activation energy tended to be enhanced with a further increase in the quenching temperature. Besides, there were both anelastic and viscoelastic relaxation for the amorphous alloys. The anelastic behaviour would change into viscoelastic relaxation easily for the samples prepared at higher temperature.

Key words

internal friction quenching temperature metallic glass 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Aasland S, McMillan P. Density-driven Liquid-Liquid Phase Separation In the System AI2O3-Y2O3 [J]. Nature, 1994, 369: 633–636CrossRefGoogle Scholar
  2. [2]
    Stanley HE, Buldyrev SV, Chen SH, et al. Liquid Polyamorphism and the Amorphous Behavior of Water[J]. Advances in Solid State Physics, 2009, 48: 249–266CrossRefGoogle Scholar
  3. [3]
    Xu W, Sandor MT, Yu Y, et al. Evidence of Liquid-Liquid Transition in Glass-Forming La55Al35Ni15 Melt Above Liquidus Temperature[J]. Nature Communications, 2015, 6: 7 696CrossRefGoogle Scholar
  4. [4]
    Wang JF, Omino A, Isshiki M. Bridgman Growth of Twin-free ZnSe Single Crystals[J]. Mat. Sci. Eng. B., 2001, 83: 185–191CrossRefGoogle Scholar
  5. [5]
    Tang YL, Kramer MJ, Dennis KW, et al. On the Control of Microstructure on Rapidly Solidified Nd-Fe-B Alloys Through Melt Treatment[J]. J. Magn. Magn. Mater., 2003, 267: 307–315CrossRefGoogle Scholar
  6. [6]
    Yang L, Dai YB, Wang J, et al. Structure of Liquid Aluminum and Hydrogen Absorption[J]. Journal of Wuhan University of Technology-Mater.Sci.Ed., 2011, 26: 93–97CrossRefGoogle Scholar
  7. [7]
    Zhu ZW, Zhang HG, Wang H, et al. Influence of Casting Temperature on Microstructures and Mechanical Properties of Cu50Zr45.5Ti2.5Y2 Metallic Glass Prepared Using Copper Mold Casting[J]. J. Mater. Res., 2009, 24: 3 108–3 115CrossRefGoogle Scholar
  8. [8]
    Kumar G, Ohkubo T, Hono K, et al. Effect of Melt Temperature on the Mechanical Properties of Bulk Metallic Glasses[J]. J. Mater. Res., 2009, 24: 2 353–2 360CrossRefGoogle Scholar
  9. [9]
    Samanta N, Chakrabarti R. Reconfiguration Dynamics in Folded and Intrinsically Disordered Protein with Internal Friction: Effect of Solvent Quality and Denaturant[J]. Physica A: Statistical Mechanics and Its Applications, 2016, 450: 165–179CrossRefGoogle Scholar
  10. [10]
    Castillo-Rodriguez M, Nó ML, Jiménez JA, et al. High Temperature Internal Friciton in a Ti-46Al-1Mo-0.2Si Intermetallic Comparison with Creep Behavior[J]. Acta Meter., 2016, 103: 46–56CrossRefGoogle Scholar
  11. [11]
    Wang Q, Pelletier JM, Lu J, et al. Study of Internal Friction Behavior in a Zr base Bulk Amorphous Alloy Around the Glass Transition[J]. Mater. Sci. Eng. A, 2005, 403: 328–333CrossRefGoogle Scholar
  12. [12]
    Wu XB, Shui JB, Wang JJ, et al. Investigation on Structural Instability Induced Relaxation and Crystallization in ZrCuAlNi Bulk Metallic Glass[J]. J. Appl. Phys., 2012, 112: 083530CrossRefGoogle Scholar
  13. [13]
    Feng SD, Qi L, Zhao F, et al. A Molecular Dynamics Analysis of Internal Friction Effects on the Plasticity of Zr65Cu35 Metallic Glass[J]. Mater. Design, 2016, 80: 36–40CrossRefGoogle Scholar
  14. [14]
    Hiki Y, Aida T, Takeuchi S. High-Temperature Internal Friction of Metallic Glasses with Widely Different Glass-Forming Ability[J]. J. Phys. Soc. Jpn., 2007, 76: 2 491–2 511CrossRefGoogle Scholar
  15. [15]
    Bobrov OP, Khonik VA. Isothermal Stress Relaxation of Bulk and Ribbon Zr-based Metallic Glass[J]. J. Non-Cryst. Solids., 2004, 342: 152–159CrossRefGoogle Scholar
  16. [16]
    Raghavan R, Murali P, Ramamurty U. On Factors Influencing the Ductile-to-Brittle Transition in a Bulk Metallic Glass[J]. Acta Mater., 2009, 57: 3 332–3 340CrossRefGoogle Scholar
  17. [17]
    Liu ZY, Yang Y, Guo S, et al. Cooling Rate Effect on Young’s Modulus and Hardness of a Zr-based Metallic Glass[J]. J. Non-Cryst. Solids., 2011, 509: 3 269–3 273Google Scholar
  18. [18]
    Kelton KF, Gangopadhyay AK, Lee GW, et al. X-ray and Electrostatic Levitation Undercooling Studies in Ti-Zr-Ni Quasicrystal Forming Alloys[J]. J. Non-Cryst. Solids., 2002, 312: 305–308CrossRefGoogle Scholar
  19. [19]
    Sinning HR, Haessner F. Determination of the Glass Transition Temperature of Metallic Glasses by Low-Frequency Internal Friction Measurements[J]. J. Non-Cryst. Solids., 1987, 93: 53–66CrossRefGoogle Scholar
  20. [20]
    Li JJZ, Rhim WK, Kim CP, et al. Evidence for a Liquid-Liquid Phase Transition in Metallic Fluids Observed by Electrostatic Levitation[J]. Acta Mater., 2011, 59: 2 166–2 171CrossRefGoogle Scholar

Copyright information

© Wuhan University of Technology and Springer-Verlag GmbH Germany, part of Springer Nature 2017

Authors and Affiliations

  • Zhizhi Wang (王知鸷)
    • 1
    Email author
  • Dong Wang
    • 1
  • Peng Jiang
    • 1
  • Wangping Wu
    • 1
  • Xiaoyan Li
    • 1
  • Fangqiu Zu
    • 2
  • Jiapeng Shui
    • 3
  1. 1.School of Mechanical EngineeringChangzhou UniversityChangzhouChina
  2. 2.School of Materials Science and EngineeringHefei University of TechnologyHefeiChina
  3. 3.Key Laboratory of Materials Physics, Institute of Solid State PhysicsChinese Academy of ScienceHefeiChina

Personalised recommendations