Abstract
Anodic oxide films grown on titanium alloy Ti-10V-2Fe-3Al in the solution of sodium tartrate, then sealed in boiling deionised water and calcium acetate solution were observed by using field emission scanning electron microscopy (FE-SEM), and were chemically analysed by using energy dispersive spectroscopy (EDS). Corrosion behaviour was investigated in a 3.5% sodium chloride solution, using electrochemical impedance spectroscopy (EIS). The morphology of the anodic oxide films was dependent on the sealing processes. The surface sealed in calcium acetate solution presented a more homogeneous and smooth structure compared with that sealed in boiling deionised water. The corrosion resistance of the oxide films sealed in calcium acetate solution was better than that sealed in boiling deionised water.
Similar content being viewed by others
References
Hsu R W, Yang C C, Huang C A, et al. Electrochemical Corrosion Studies on Co-Cr-Mo Implant Alloy in Biological Solutions ACImpedance Measurements on Corroded Porous Aluminum Oxide Films[J]. Mater. Chem. Phys., 2005, 93: 531–538
Pan J, Thierry D, Leygraf C. Hydrogen Peroxide Toward Enhanced Oxide Growth on Titanium in PBS Solution: Blue Coloration and Clinical Relevance[J]. J. Biomed. Mater. Res., 1996,30: 393–302
Silva P L, Santos J D, Manterio F J, et al. Adhesion and Microstructural Characterization of Plasma-sprayed Hydroxyapatite/glass Ceramic Coatings onto Ti-6Al-4V Substrates AC-Impedance Measurements on Corroded Porous Aluminum Oxide Films[J]. Surf. Coat. Technol., 1998, 102: 191–196
Yao Z P, Jiang Z H, Xin S G, et al. Electrochemical Impedance Spectroscopy of Ceramic Coatings on Ti–6Al–4V by Micro-plasma Oxidation[J]. Electrochimica Acta, 2005, 50: 3273–3279
Souza M E P, Ballester M, Freire C M A. EIS Characterisation of Ti Anodic Oxide Porous Films Formed Using Modulated Potential[J]. Surf. Coat. Technol., 2007, 201: 7775–7780
Liu J H, Yi J L, Li S M, et al. Influence of Electrolyte Concentration on the Morphology, Structure and Corrosion Resistance of Anodic Oxide Films on Ti-10V-2Fe-3Al Titanium Alloy[J]. J. Appl. Electrochem., 2010, 40: 1545–1553
Wang B, Liu Z Q, Gao Y, et al. Microstructural Evolution During Aging of Ti-10V-2Fe-3Al Titanium Alloy[J]. J. Univ. Sci. Technol. Beijing, 2007, 4: 335–340
Y Fovet, J Y Gal, A F T Chemla. Influence of pH and Fluoride Concentration on Titanium Passivating Layer Stability of Titanium Dioxide[J]. Talanta., 2001,53: 1053–1063
Diamanti M V, Pedeferri M P, Effect of Anodic Oxidation Parameters on the Titanium Oxides Formation[J]. Corros. Sci., 2007, 49: 939–948
Beranek R, Hildebrand H, Schmuki P. Self-organized Porous Titanium Oxide Prepared in H2SO4/HF Electrolytes[J]. Electrochim. Acta, 2005, 50: 3679–3684
Bauer S, Kleber S, Schmuki P. TiO2 Nanotubes: Tailoring the Geometry in H3PO4/HF Electrolytes TiO2 Nanotubes: Tailoring the Geometry in H3PO4/HF Electrolytes[J]. Electrochem. Commun., 2006, 8: 1321–1325
Yi J L, Liu J H, Li S M, et al. Morphology Evolution and Growth Mechanism of Porous Anodic Oxide Films on Titanium Alloy Ti-10V-2Fe-3Al in Neutral Tartrate Solution[J]. J. Cent. South Univ. Technol., 2011, 18(1): 6–15
Gaponenko N V, Hluzd Y V, Maliarevich G K, et al. Room-temperature Photoluminescence From Porous Anodic Alumina Films with Wmbedded Terbium and Europium Species[J]. Mater. Lett., 2009, 63: 621–624
Zhang J S, Zhao X H, Zuo Y, et al. The Bonding Strength and Corrosion Resistance of Aluminum Alloy by Anodizing Treatment in a Phosphoric Acid Modified Boric Acid/Sulfuric Acid Bath[J]. Surf. Coat. Technol., 2008, 202: 3149–3156
Zuo Y, Zhao P H, Zhao J M. The Influences of Sealing Methods on Corrosion Behavior of Anodized Aluminum Alloys in NaCl Solution[J]. Surf. Coat. Technol., 2003, 166: 273–242
HAO L, Cheng B R. Sealing Process of Anodic Coatings-past, Present, and Future[J]. Metal Finish, 2000, 12: 8–18
Snogan F, Blanc C, Mankowski G, et al. Characterisation of Sealed Anodic Films on 7050 T74 and 2214 T6 Aluminium Alloys[J]. Surf. Coat. Technol., 2002, 154: 94–103
Tamilselvi S, Raman V, Rajendram N. Corrosion Behaviour of Ti-6Al-7Nb and Ti-6Al-4V ELI Alloys in the Simulated Body Fluid Solution by Electrochemical Impedance Spectroscopy[J]. Electrochim. Acta, 2006, 52: 839–846
Raman V, Tanmilselvi S, Rajendram N. Electrochemical Impedance Spectroscopic Characterization of Titanium During Alkali Treatment and Apatite Growth in Simulated Body Fluid[J]. Electrochim. Acta, 2007, 52: 7418–7424
Kang M K, Moon S K, Lee S B, et al. Antibacterial Effects and Cytocompatibility of Titanium Anodized in Sodium Chloride, Calcium Acetate, and b-glycerol Phosphate Disodium Salt Pentahydrate Mixed Solution[J]. Thin Solid Films, 2009, 517: 5390–5393
Hoar T P, Wood G C. The Sealing of Porous Anodic Oxide Films on Aluminium[J]. Electrochim. Acta, 1962,7: 333–353
Hitzig J, Juettner K, Lorenz W J, et al. AC-Impedance Measurements on Corroded Porous Aluminum Oxide Films[J]. J. Electrochem.Soc., 1986, 133: 887–892
Hitzig J, Juettner K, Lorenz W J, et al. AC-Impedance Measurements on Porous Aluminum Oxide Films[J]. Corros. Sci., 1984, 24: 945–952
Laet J D, Scheers J, Terryn H, et al. Characterzation of Aluminium Surface Treatments with Electrochemical Impedance Spectroscopy and Spectroscopic Ellipsometry AC-Impedance Measurements on Corroded Porous Aluminum Oxide Films[J]. Electrochim. Acta, 1993, 38: 2103–2109
Souza M E P, Ballester M, Freere C M A. EIS Characterisation of Ti Anodic Oxide Porous Films Formed Using Modulated Potential[J]. Surf. Coat. Technol., 2007, 201: 7775–7780
Raman V, Nagarajan S, Rajendran N. Electrochemical Impedance Spectroscopic Characterization of Paßsive Film Formed over Ti-29Nb-13Ta-4.6Zf Alloy[J]. Electrochem. Commun., 2006, 8: 1309–1314
Gonzalez J A, Lopez V, Bautista A, et al. Characterization of Porous Aluminium Oxide Films From AC Impedance measurements[J]. J. Appl. Electrochem., 1999, 29; 229–238
Lizarbe R, Gonzalez J A, Lopez W, et al. Autosealing of Aluminuim Oxide Films[J]. Aluminium, 1992, 2: 140–144
Author information
Authors and Affiliations
Corresponding author
Additional information
Supported by the National Natural Science Foundation of China (No.51271012)
Rights and permissions
About this article
Cite this article
Liu, J., Wu, L., Yu, M. et al. EIS characterization of sealed anodic oxide films on titanium alloy Ti-10V-2Fe-3Al. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 31, 599–605 (2016). https://doi.org/10.1007/s11595-016-1416-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11595-016-1416-6