Skip to main content
SpringerLink
Log in

Grain refining of flange plate for welded H section steel made under asynchronous rolling condition

  • Published:
Journal of Wuhan University of Technology-Mater. Sci. Ed. Aims and scope Submit manuscript

Abstract

Asynchronous rolling technology was adopted for the accumulated ten passes cold rolling, flange plate steel, and for welded H section steel, respectively. The metallographic microstructure analysis, tensile test and annealing test were carried out for cold rolled pieces; thus the ratio of length to width of grain, tensile strength, relationship between the grain size and asynchronous rolling process parameters after annealing can be obtained. The experimental results show that the relationship between the asynchronous rolling and the shearing deformation of rolled pieces can make a reasonable interpretation of the mechanism that asynchronous rolling may improve the strain accumulated energy of rolled pieces and the strength of flange plate steel. This paper provides a theoretical basis for the application of asynchronous rolling in improving the strength of flange plate steel.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Ji YH, Park JJ. Development of Severe Plastic Deformation by Various Asymmetric Rolling Processe[J]. Materials Science and Engineering A,2009, 499:14–17

    Article  Google Scholar 

  2. Luo Dexing, Zhang Haibin, Chen Qian. Study on Grain Refining in Asynchronous Rolling[J]. Iron and Steel, 2005,40(3):59

    CAS  Google Scholar 

  3. Iwahashi Y, Horita Z, Horita Z, Nemoto M, et al. An Investigation of Microstructural Evolution During Equalchannel Angular Pressing[J]. Acta Mater.,1997, 45( 17):4733

    Article  CAS  Google Scholar 

  4. Feng Xi, Shi Lianjie, Lv Shu. Research on Ultrasonic Shot Peening Surface Nanocrystallization of Low Carbon Steel [J]. Acta Metallurgica Sinica, 2000,36: 30

    Google Scholar 

  5. Cui Q, Ohori K. Grain Refinement of High Purity Aluminium by Asymmetric Rolling[J]. Materials Science and Technology, 2000,16: 1095

    CAS  Google Scholar 

  6. Jin H, Lolyd D J. The Reduction of Planar Anisotropy by Texture Modification Through Asymmetric Rolling and Annealing in AA5754[J]. Materials Science and Engineering, 2005,399: 358

    Article  Google Scholar 

  7. Jin H, Lloyd D J. The Tesile Response of a Fine-grained AA5754 Alloy Produced by Asymmetric Rolling and Annealing [J]. Metallurgical and Materials Transactions A, 2004,35A: 997

    CAS  Google Scholar 

  8. Richelsen A B. Elastic-plastic Analysis of the Stress and Strain Distribution in Asymmetric Rolling [J]. Int. J. Mech. Sci., 1997, 39:1 199

    Article  Google Scholar 

  9. Akbari Mousavi Saa, Ebrahimi S M, Madoliatr. Three Dimensional Numerical Analyses of Ssymmetric Rolling[J]. Journal of Materials Processing Technology, 2007, 187:725

    Article  Google Scholar 

  10. Kadkhodaeiam, Salimiam, Poursinab M. Analysis of Asymmetrical Sheet Rolling by a Genetic Algorithm[J]. Intemational Journal of Mechanical Sciences, 2007,49:622

    Article  Google Scholar 

  11. Farha-niaf, Salimim, Movahhedy M R. Elasto-plastic Finite Element Simulation of Asymmetrical Plate Rolling Using an ALE Approach [J]. Journal of Materials Processing Technology, 2006,177:525

    Article  Google Scholar 

  12. Lv Aiqiang, Jiang Qiwu. Effect of Asynchronous Rolling on Cold Rolled Texture of High Purity Aluminum Foil[J]. Acta Metallurgica Sinica, 2002, 38( 9):974

    Google Scholar 

  13. ZUO Fang-qing. Shear Deformation and Grain Refinement in Pure Al by Asymmetric Rolling[J]. Transactions of Nonferrous Metals Society of China, 2008,18:774–777

    Article  CAS  Google Scholar 

  14. LIU Gang. Research on Grain-oriented Silicon Steel under Asynchronous Rolling Condition[D]. Shengyang: Northeastern University, 1997,11:57–59

    Google Scholar 

  15. Chu Wuyang, Qiao Lijie, Chen Qizhi. Fracture and Environmental Fracture[M]. Beijing: Science Press, 2000

    Google Scholar 

  16. Fan Tianyou. Principle and Application of Breaking Kinetics[M]. Beijing: Beijing University of Technology Press, 2006

    Google Scholar 

  17. Zhong Qunpeng, Zhao Zihua. Fractography[M]. Beijing: Higher Education Press, 2006:154

    Google Scholar 

  18. Yu Yongning. Principles of Metallography[M]. Beijing: Metallurgical Industry Press, 2005:306

    Google Scholar 

  19. Zhao Gang. Metallurgical Physics Background for Material Formation. [M]. Beijing: Metallurgical Industry Press, 2009:78–79

    Google Scholar 

  20. Kang Yonglin, Fu Jie. Control of Structure Property of Continuous Cast and Rolled Steel from Sheet Billet[M]. Beijing: Metallurgical Industry Press, 2006:317

    Google Scholar 

  21. Kang Yonglin, Fu Jie. Control of Structure Property of Continuous Cast and Rolled Steel from Sheet Billet[M]. Beijing: Metallurgical Industry Press, 2006:375

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Research Institute of Metallurgical Engineering, University of Science & Technology Beijing, Beijing, 100083, China

    Hui Dai  (戴辉), Jiquan Sun & Di Tang

  2. Tangshan Iron & Steel Design & Research Institute Co., Ltd., Hebei Iron & Steel Group, Tangshan, 063000, China

    Hui Dai  (戴辉)

Authors
  1. Hui Dai  (戴辉)
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jiquan Sun
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Di Tang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Hui Dai  (戴辉).

Rights and permissions

Reprints and permissions

About this article

Cite this article

Dai, H., Sun, J. & Tang, D. Grain refining of flange plate for welded H section steel made under asynchronous rolling condition. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 26, 1121–1127 (2011). https://doi.org/10.1007/s11595-011-0374-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11595-011-0374-2

Key words

Search

Navigation