Abstract
The influence of various alumina additions on the optical property of zirconia/alumina composite ceramics was investigated. The relative sintered densities, transmittances, color and the microstructure of the composite ceramics were studied. The experimental results showed that the relative sintered densities and transmittances decreased with alumina addition. The lightness increased obviously but the chroma change was small. Pure zirconia nanopowders sintered densely could obtain the relatively high transmittance, while the transmittance and the lightness of slight addition changed significantly. The zirconia/alumina composite ceramics with alumina addition less than 7.5wt% could achieve the relatively stable and reliable optical properties.
Similar content being viewed by others
References
Denry I, Kelly JR. State of the Art of Zirconia for Dental Applications[J]. Dent. Mater., 2008, 24:299–307
Kelly JR, Denry I. Stabilized Zirconia as a Structural Ceramic: An Overview[J]. Dent. Mater., 2008, 24:289–298
Chevalier J, Cales B, Drouin JM. Low-temperature Aging of Y-TZP Ceramics[J]. J. Am. Ceram. Soc., 1999, 82(8):2150–2154
Elshazly ES, Ali ME, El-Hout SM. Alumina Effect on the Phase Transformation of 3Y-TZP Ceramics[J]. J. Mater. Sci. Technol., 2008, 24(6):873–877
Tsubakino H, Nozato R, Hamamoto M. Effect of Alumina Addition on the Tetragonal-to-monoclinic Phase Transformation in Zirconia-3mol% Yttria[J]. J. Am. Ceram. Soc., 1991, 74(2):440–443
Choi SR, Bansal NP. Mechanical Behavior of Zirconia/alumina Composites[J]. Ceram. Int., 2005, 31:39–46
Sakka Y, Suzuki TS, Morita K, et al. Colloidal Processing and Superplastic Properties of Zirconia- and Alumina-based Nanocomposites[J]. Scr. Mater., 2001, 44:2075–2078
Vasylkiv O, Sakka Y, Skorokhod VV. Low-temperature Processing and Mechanical Properties of Zirconia and Zirconia-alumina Nanoceramics[J]. J. Am. Ceram. Soc., 2003, 86(2):299–304
Ban S. Reliability and Properties of Core Materials for Allceramic Dental Restorations[J]. Jpn. Dent. Sci. Rev., 2008, 44:3–21
Ban S, Nawa M, Suehiro Y, et al. Mechanical Properties of Zirconia/alumina Nano-composite after Soaking in Various Water-based Conditions[J]. Key Eng. Mater., 2006, 309–311:1 219–1 222
Kelly JR, Nishimura I, Campbell SD. Ceramics in Dentistry: Historical Roots and Current Perspectives[J]. J. Prosthet. Dent., 1996, 75:18–32
Heffernan MJ, Aquilino SA, Diaz-Arnold AM, et al. Relative Translucency of Six All-ceramic Restorative Systems. Part I: Core Materials[J]. J. Prosthet. Dent., 2002, 88:4–9
Alkhunaizi R, Pober R, Giordano R. Translucency Comparison of CAD/CAM Materials[C]. In: Proceeding of 86th IADR, Metro Toronto, 2008
McLaren EA, Giordano RA. Zirconia-based Ceramics: Material Properties, Esthetics, and Layering Techniques of a New Veneering Porcelain, VM9[J]. Quintessence of Dental Technology, 2005, 28:99–111
Zhang YL, Griggs JA, Benham AW. Influence of Powder/liquid Mixing Ratio on Porosity and Translucency of Dental Porcelains[J]. J. Prosthet. Dent., 2004, 91:128–135
Peelen JGJ, Metselaar R. Light Scattering by Pores in Polycrystalline Materials: Transmission Properties of Alumina[J]. J. Appl. Phys., 1974, 45(1):216–220
Krell A, Hutzler T, Klimke J. Transmission Physics and Consequences for Materials Selection, Manufacturing, and Applications[J]. J. Eur. Ceram. Soc., 2009, 29:207–221
Author information
Authors and Affiliations
Corresponding author
Additional information
Funded by the National High-Tech Research and Development Program of China (863 Program) (No. 2006AA03Z440)
Rights and permissions
About this article
Cite this article
Jiang, L., Liao, Y., Li, W. et al. Influence of alumina addition on the optical property of zirconia/alumina composite dental ceramics. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 26, 690–695 (2011). https://doi.org/10.1007/s11595-011-0294-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11595-011-0294-1