Abstract
Thermal diffusion (TD) salt bath chromizing of cold working dies was studied. Firstly, it obtained an ideal salt bath formula by comparing with a variety of formulas, and then obtained the influence rule of coating thickness based on studying of some process parameters. The microstructure morphologies and phase structures of the TD chromizing coating were investigated by X-ray diffraction (XRD), energy-dispersive spectrometry (EDS) and other modern analysis methods. Meanwhile, it carried out a system of testing and analysis of coating, such as hardness, wear resistance, etc.
Similar content being viewed by others
References
Qiuling Wang. Research on TD Chromizing Carbide Coating of Cold Working die Materials[D]. Wuhan: Wuhan University of Technology, 2010
X J Liu, HC Wang, YY Li. Effects of Rare Earths in Borax Salt Bath Immersion Vanadium Carbide Coating Process On Steel Substrate[J]. Surface & Coatings Technology, 2008, 202: 788–4792
XJ Liu, HC Wang, DW Li, YX Wu. Study on Kinetics of Carbide Coating Growth by Thermal Diffusion Process[J]. Surface & Coatings Technology, 2006, 201: 2414–2418
YX Wu. Study on Thermal Diffusion on Cold Extrusion Die[D]. Wuhan: Wuhan University of Technology, 2006
XJ Liu. Study on Vanadium Carbide Coating on Die Steels by Thermal Diffusion Process[D]. Wuhan: Wuhan University of Technology, 2007
Saduman Sen. Influence of Chromium Carbide Coating on Tribological Performance of Steel[J]. Materials & Design, 2006, 27(2): 85–91
Saduman Sen. The Characterization of Vanadium Boride Coatings on AISI 8620 Steel[J]. Surface & Coatings Technology, 2005, 190: 1–6
Y Herrera, IC Grigorescu, J Ramirez, CD iRauso, MH Staia. Micro structural Characterization of Vanadium Carbide Laser Clad Coatings[J]. Surface & Coatings Technology, 108–109(1998) 308–311
M Aghaie-Khafri, F Fazlalipour. Vanadium Carbide Coatings on Die Steel Deposited by the Thermo-reactive Diffusion Technique[J]. Journal of Physics and Chemistry of Solids, 2008, 69: 2465–2470
Ugur Sen. Wear Properties of Niobium Carbide Coatings Performed by Pack Method on AISI 1040 Steel[J]. Thin Solid Films, 2005, 483: 152–157
Swapnil V Shah, Narendra B Dahotre. Laser Surface-engineered Vanadium Carbide Coating for Extended Die Life[J]. Journal of Materials Processing Technology, 2002, 124: 105–112
B Chicco, WE Borbidge, E Summerville. Experimental Study of Vanadium Carbide and Carbonitride Coatings[J]. Materials Science and Engineering, 1999, A266: 62–72
Author information
Authors and Affiliations
Corresponding author
Additional information
Funded by the National Natural Science Foundation of China (No. 60473134)
Rights and permissions
About this article
Cite this article
Yuan, Z., Wang, Z., Zhang, W. et al. Preparation and property of chromium carbide thermal diffusion coating on cold working die materials. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 25, 596–599 (2010). https://doi.org/10.1007/s11595-010-0051-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11595-010-0051-x