The microstructures of gypsum board and gypsum particleboard were observed by SEM. The effects of retarder and waterproof agent on the shape and the average dimension of the gypsum crystal were discussed. The mechanism was investigated as well. Four typical instances, i e, the gypsum crystal shape, the gypsum combined with particles on the particles surface, the gypsum combined with particles on the wood cross section and the gypsum combined with particles inside the wood cell cavity were selected and observed. Furthermore, the agglomeration and cementation mechanism between gypsum and particle were studied.
This is a preview of subscription content, log in to check access.
Buy single article
Instant access to the full article PDF.
Price includes VAT for USA
Y H Deng, Furuno Takeshi. Effect of Additives on Gypsum Particleboard Properties[J]. Forestry Products Industry, 1998, 25(2): 2–4.
Y H Deng, L Xuan, Q Feng. Study on the Waterproof Property of Gypsum Particleboard Improved with Waterproofing Agent[C]. The 7th Pacific Rim Bio-Based Composites Symposium, PROCEEDINGS, volume II:375–382
H Y Jiang, R Z Yuan, X Xiang. Research on the Hign-Strength and Water-Resistant Mechanism of Gypsum Base New Binding Material[J]. J. Wuhan University of Technology, 2000, 22(1):22–24 (in Chinese)
L Wu. The Retarders Effect on the Hydration Process of Calcined Gypsum and Microstructure of Gypsum[J]. New Building Materials, 2003(7):1–3 (in chinese)
Funded by the National Natural Science Foundation of China (No. 30371130) NSFU and KOSEF cooperation research in 2004
About this article
Cite this article
Feng, Q., Deng, Y., Kim, H. et al. Observation and analysis of gypsum particleboard using SEM. J. Wuhan Univ. Technol. 22, 44–47 (2007). https://doi.org/10.1007/s11595-005-1044-z
- crystal shape
- gypsum particleboard