Abstract
Focal mechanism solutions and centroid depths of 312 M≥4 aftershocks from the 2008 Wenchuan earthquake sequence have been derived by CAP (Cut and Paste) method from broadband waveform data with relatively high signal-to-noise ratio (SNR). Following this, we have analyzed the distribution of focal depths and the stress tensors, as well as the types of focal mechanisms. The major results are: (1) different cross-sections show that the depth ranges of the aftershocks at the southern and northern ends of the aftershock area along the Longmenshan fault zone are wider than those on the central segment, where rare M≥4 aftershocks occurred at depths shallower than 10 km. The main faults trend to the NW on the southern and central segments, and for the northern segment, no dominant trend direction has been determined; (2) stress tensor distribution demonstrates that the majority of the aftershock areas on the cross-section along the major axis are mainly under compressive stress perpendicular to the profile; however, for the areas near Lixian, Beichuan, Qingchuan and the shallow parts of its northern segment, large principal stress components are parallel to the major axis profile direction. On the cross-sections perpendicular to the major axis, the three areas above can be divided into two parts: one with dominantly compressional stress near the major faults of the Longmenshan fault zone on the SE side, and the other with NE-direction push along the fault zone on the NW side; (3) the stress tensor distribution in map view is very similar to those on the vertical cross-sections. In map view, the orientation of the principal compressional stress axis S1 on the central segment of the aftershock area presents an SE-trending arc shape; (4) the stress tensor slices at different depths show that the orientation of S1 axis mainly changes on the central segment and at the northern end, indicating that the two segments have different seismogenic structures at different depths; (5) with the exception of the northern end of the aftershock region, the orientation of the S1 axis changes little during the early and late stages, illustrating the seismogenic structures are relatively stable; (6) preliminary analyses for the seismogenic structures at the northern end indicated that deeper strike-slip quakes occurred on the ENE-striking branch at first, and then the NNE-striking branch faults at the northern end were activated and generated a series of relatively shallow strike-slip earthquakes due to subsequent stress-triggering; (7) the aftershock triggering mechanism that occurred near Lixian is different between the shallow and deep depths, and between the early and late stages, indicating that the main faults and the branch faults responsible for aftershocks are at different depths. Consequently, the relaxation effect of the main shock particularly impacts the branch faults.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Angelier J (1979). Determination of the mean principal directions of stresses for a given fault population. Tectonophysics56: T17–T26.
Burchfiel B C, Chen Z, Liu Y and Royden L H (1995). Tectonics of the Longmenshan and adjacent regions, central China. Int Geol Rey J37(8): 661–735.
Chen T C, Horiuchi S and Zheng S H (2001). Earthquake focal mechanisms and stress field in Sichuan-Yunnan area determined using P wave polarity and short period P and S waveform data. Acta Seismologica Sinica14(4): 466–470.
Chen Y (1978). Consistency of focal mechanism as a new parameter in describing seismic activity. Chinese J Geophys21(2): 142–159 (in Chinese with English abstract).
Cheng E L (1981). Recent tectonic stress field and tectonic movement of the Sichuan Province and its vicinity. Acta Seismologica Sinica3(3): 231–241 (in Chinese with English abstract).
Cui X F and Xie F R (1999). Preliminary research to determine stress districts from focal mechanism solutions in Southwest China and its adjacent area. Acta Seismologica Sinica12(5): 562–572.
Das S and Scholz C H (1981). Off-fault clusters caused by shear stress increase? Bull Seismol Soc Am71: 1 669–1 675.
Fan C, Wang E Q, Wang G and Wang S F (2008). Dextral strike-slip and tectonic transformation of the northern Longmen Shan fault belt from Late Neogene: A case study from the Qingchuan fault. Chinese J Geology43(3): 417–433 (in Chinese with English abstract).
Fossen H (2010). Structural Geology. Cambridge University Press, Cambridge, 69–96.
Gephart J W (1990). FMSI: A FORTRAN program for inverting fault/slickenside and earthquake focal mechanism data to obtain the original stress tensor. Comput Geosci16(7): 953–989.
Gephart JW and Forsyth DW(1984). An improved method for determining the regional stress tensor using earthquake focal mechanism data: application to the San Fernando earthquake sequence. J Geophys Res89: 9 305–9 320.
Hu X P, Yu C Q, Tao K, Cui X F, Ning J Y and Wang Y H (2008). Focal mechanism solutions of Wenchuan earthquake and its strong aftershocks obtained from initial P wave polarity analysis. Chinese J Geophys51(6): 1 711–1 718 (in Chinese with English abstract).
Huang Y, Wu J P, Zhang T Z and Zhang D N (2008). Relocation of the M8.0 Wenchuan earthquake and its aftershock sequence. Science in China (Series D) 51: 1 703–1 711.
Jiang H K, Li M X, Wu Q and Song J (2008). Features of the May 12 M8.0 Wenchuan earthquake sequence and discussion on relevant problems. Seismology and Geology30(3): 746–758 (in Chinese with English abstract).
Long F, Zhang Y J, Wen X Z, Ni S D and Zhang Z W (2010). Focal mechanism solutions of ML≥4.0 events in the MS6.1 Panzhihua-Huili earthquake sequence of Aug 30, 2008. Chinese J Geophys53(12): 2 852–2 860 (in Chinese with English abstract).
Luo Y, Ni S D, Zeng X F, Zheng Y, Chen Q F and Chen Y (2010). A shallow aftershock sequence in the northeastern end of the Wenchuan earthquake aftershock zone. Science in China (Series D) 53(11): 1 655–1 664.
Ma J, Li Q Z, Diao G L and Yu L M (1994). Application of focal mechanism to earthquake prediction and its significance. Earthquake14(S1): 27–34 (in Chinese with English abstract).
Michael A J (1984). Determination of stress from slip data: faults and folds. J Geophys Res89: 11 517–11 526.
Michael A J (1991). Spatial variations in stress within the 1987 Whittier Narrows, California, aftershock sequence: new techniques and results. J Geophy Res96(B4): 6 303–6 319.
Oppenheimer D H, Reasenberg P A and Simpson R W (1988). Fault plane solutions for the 1984 Morgan Hill, California, earthquake sequence: Evidence for the state of stress on the Calaveras fault. J Geophys Res93: 9 007–9 026.
Song M Q, Zheng Y, Li B, Su Y, Wang X S, Lü F and Zhao X Y (2012). Discussion on focal mechanism solutions and seismogenic structure of 24 Jan 2010 Hejin-Wanrong, Shanxi, MS4.8 earthquake. Acta Seismologica Sinica34(1): 111–117 (in Chinese with English abstract).
Stein R S and Lisowski M (1983). The 1979 Homestead valley earthquake sequence, California: Control of aftershocks and postseismic deformation. J Geophys Res88: 6 477–6 490.
Wang E Q, Meng Q R, Chen Z L and Chen L Z (2001). Early Mesozoic left-lateral movement along the Longmen Shan fault belt and its tectonic implication. Earth Science Frontiers8(1): 375–384 (in Chinese with English abstract).
Wang Q C, Chen Z L and Zheng S H (2009). Spatial segmentation characteristic of focal mechanism of aftershock sequence of Wenchuan earthquake. Science in China (Series D) 54: 2 348–2 354.
Wessel P and Smith W H F (1991). Free software helps map and display data. EOS Trans AGU72: 441, 445–446.
Wiemer S (2001). A software package to analyze seismicity: ZMAP. Seism Res Lett72: 373–382.
Wiemer S, Gerstenberger M and Hauksson E (2002). Properties of the aftershock sequence of the 1999 MW 7.1 Hector Mine earthquake: implications for aftershock hazard. Bull Seismol Soc Am92(4): 1 227–1 240.
Xu X W, Wen X Z, Yu G H, Chen G H, Klinger Y, Hubbard J and Shaw J (2009). Coseismic reverse- and oblique-slip surface faulting generated by the 2008 MW 7.9Wenchuan earthquake, China. Geology37(6): 515–518.
Xu Z H, Wang S Y, Huang Y R, Gao A J, Jin X F and Chang X D (1987). Directions of mean stress axes in southwestern China deduced from microearthquake data. Chinese J Geophys30(5): 476–486 (in Chinese with English abstract).
Yi G X, Long F and Zhang ZW(2012). Spatial and temporal variation of focal mechanisms for aftershocks of the 2008 MS8.0 Wenchuan earthquake. Chinese J Geophys55(4): 1 213–1 227 (in Chinese with English abstract).
Zhang J L, Shen X H, Xu Y L, Gao Z W, Lü X J and Yang P X (2009). Surface rupture features and segmentation of the MS8.0 Wenchuan earthquake. Earthquake29(1): 149–163 (in Chinese with English abstract).
Zhang P Z, Deng Q D, Zhang G M, Ma J, Gan W J, Min W, Mao F Y and Wang Q (2003). Active tectonic blocks and strong earthquakes in the continent of China. Science in China (Series D) 46(Suppl.): 13–24.
Zhang Z W, Zhang Y J, Cheng W Z, Wu P, Long F and Ruan X (2010). Focal mechanisms and stress field of small earthquakes of the MW8.0 Wenchuan earthquake sequence. J Seismol Res33(1): 43–49 (in Chinese with English abstract).
Zhao L S and Helmberger D V (1994). Source estimation from broadband regional seismograms. Bull Seismol Soc Am84(1): 91–104.
Zheng Y, Ma H S, Lü J, Ni S D, Li Y C and Wei S J (2009). Source mechanism of strong aftershocks (MS≥5.6) of the 2008/05/12 Wenchuan earthquake and the implication for seismotectonics. Science in China (Series D) 52(6): 739–753.
Zhu L P and Helmberger D V (1996). Advancement in source estimation techniques using broadband regional seismograms. Bull Seismol Soc Am86(5): 1 634–1 641.
Zoback M L (1992). First and second order patterns of stress in the lithosphere: the world stress map project. J Geophys Res97: 11 703–11 728.
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Long, F., Yi, G., Wen, X. et al. Spatio-temporal variation of the stress field in the Wenchuan aftershock region. Earthq Sci 25, 517–526 (2012). https://doi.org/10.1007/s11589-012-0875-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11589-012-0875-x