Abstract
With the popularity of new energy vehicles, the demand for fast charging and rapid discharge is further increasing. Layered high-nickel ternary materials possess significant potential as cathode materials for electric vehicle batteries due to their high capacity, low cost, and environmental friendliness. In this paper, lithium metaborate, lithium hydroxide, and 90 series high-nickel ternary material precursors were used as raw materials to synthesize a series of B-doped cathode materials with highly textured structures. It is found that B doping can improve the lithium-ion diffusion rate, and the B-modified cathode material also has excellent rate performance, and the 0.5% B-doped cathode material still maintains a discharge specific capacity of 157.13 mAh/g at a discharge rate of 10 C. Additionally, the test of microparticle compressor shows that boron doping can significantly improve the mechanical properties of ternary cathode materials and inhibit the formation of microcracks. In summary, this study puts forward a new idea for the modification of high-nickel ternary cathode materials and promotes the commercialization of high-nickel ternary cathode materials.
Similar content being viewed by others
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
Patoux S, Daniel L, Bourbon C et al (2009) High voltage spinel oxides for Li-ion batteries: from the material research to the application. J Power Sources 189(1):344–352
Jan SS, Nurgul S, Shi X et al (2014) Improvement of electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode material by graphene nanosheets modification. Electrochim Acta 149:86–93
Zhang HZ, Liu C, Song DW et al (2017) A new synthesis strategy towards enhancing the structure and cycle stabilities of the LiNi0.80Co0.15Al0.05O2 cathode material. J Mater Chem A 5(2):835–841
Manthiram A, Knight JC, Myung S-T et al (2016) Nickel-Rich and lithium-rich layered oxide cathodes: progress and perspectives. Adv Energy Mater 6(1):1501010
Lv Y, Huang S, Zhao Y et al (2022) A review of nickel-rich layered oxide cathodes: synthetic strategies, structural characteristics, failure mechanism, improvement approaches and prospects. Appl Energy 305:117849
Sicklinger J, Metzger M, Beyer H et al (2019) Ambient storage derived surface contamination of NCM811 and NCM111: performance implications and mitigation strategies. J Electrochem Soc 166(12):A2322–A2335
Ryu H-H, Park K-J, Yoon CS et al (2018) Capacity fading of Ni-Rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation? Chem Mater 30(3):1155–1163
Sun YK, Chen Z, Noh HJ et al (2012) Nanostructured high-energy cathode materials for advanced lithium batteries. Nat Mater 11(11):942–947
Guo YJ, Zhang CH, Xin S et al (2022) Competitive doping chemistry for nickel-rich layered oxide cathode materials. Angew Chem Int Ed Engl 61(21):e202116865
Ahaliabadeh Z, Kong X, Fedorovskaya E et al (2022) Extensive comparison of doping and coating strategies for Ni-rich positive electrode materials. J Power Sources 540:231633
Schipper F, Dixit M, Kovacheva D et al (2016) Stabilizing nickel-rich layered cathode materials by a high-charge cation doping strategy: zirconium-doped LiNi0.6Co0.2Mn0.2O2. J Mater Chem A 4(41):16073–16084
Hu X, Qiang W, Huang B (2017) Surface layer design of cathode materials based on mechanical stability towards long cycle life for lithium secondary batteries. Energy Storage Mater 8:141–146
Chen T, Li X, Wang H et al (2018) The effect of gradient boracic polyanion-doping on structure, morphology, and cycling performance of Ni-rich LiNi0.8Co0.15Al0.05O2 cathode material. J Power Sources 374:1–11
Sivaprakash S, Majumder SB (2009) Understanding the role of Zr4+ cation in improving the cycleability of LiNi0.8Co0.15Zr0.05O2 cathodes for Li ion rechargeable batteries. J Alloys Compounds 479(1-2):561–568
Han B, Paulauskas T, Key B et al (2017) Understanding the Role of temperature and cathode composition on interface and bulk: optimizing aluminum oxide coatings for Li-ion cathodes. ACS Appl Mater Interfaces 9(17):14769–14778
Yan P, Zheng J, Liu J et al (2018) Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries. Nat Energy 3(7):600–605
Li L, Fu L, Li M et al (2022) B-doped and La4NiLiO8-coated Ni-rich cathode with enhanced structural and interfacial stability for lithium-ion batteries. J Energy Chem 71:588–594
Gao S, Shi BZ, Liu J et al (2021) Boron doping and LiBO2 coating synergistically enhance the high-rate performance of LiNi0.6Co0.1Mn0.3O2 cathode materials. ACS Sustain Chem Eng 9(15):5322–5333
Li T, Li X, Wang Z et al (2017) A short process for the efficient utilization of transition-metal chlorides in lithium-ion batteries: a case of Ni0.8Co0.1Mn0.1O1.1 and LiNi0.8Co0.1Mn0.1O2. J Power Sources 342:495–503
Jiang M, Danilov DL, Eichel RA et al (2021) A review of degradation mechanisms and recent achievements for Ni-rich cathode-based Li-ion batteries. Adv Energy Mater 11(48):2103005
Zhang LL, Wang JQ, Yang XL et al (2018) Enhanced electrochemical performance of fast ionic conductor LiTi2(PO4)3-coated LiNi1/3Co1/3Mn1/3O2 cathode material. ACS Appl Mater Interfaces 10(14):11663–11670
Funding
Project supported by the Central South University Innovation-Driven Research Programme (Grant No. 2023CXQD053), the Natural Science Foundation of Hunan Province China (Grant No.2021JJ30823), the National Natural Science Foundation of China (Grant No. 52274310), and the National Natural Science Foundation of China (Grant No. 52172264).
Author information
Authors and Affiliations
Contributions
Conceptualization, Yue Li and Ying-de Huang; methodology, Jing-yi Li; software, Chang-long Lei; validation, Yue Li and Zhen-jiang He; formal analysis, Yue Li; investigation, Zhen-jiang He; re-sources, Yun-jiao Li; data curation, Yue Li; writing—original draft preparation, Yue Li; writing—review and editing, Yue Li and Zhen-jiang He; visualization, Fei-xiang Wu; supervision, Yun-jiao Li; project administration, Yi Cheng; funding acquisition, Zhen-jiang He. All authors have read and agreed to the published version of the manuscript.
Corresponding author
Ethics declarations
Ethics approval
Ethical approval does not apply to this article.
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Li, Y., Huang, Yd., Li, Jy. et al. B-doped nickel-rich ternary cathode material for lithium-ion batteries with excellent rate performance. Ionics 29, 4559–4567 (2023). https://doi.org/10.1007/s11581-023-05191-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11581-023-05191-9