Abstract
Lithium-sulfur (Li–S) batteries are still in difficulty to be commercialized so far, owing largely to the cathode challenges involving severe volume expansion and insulation of sulfur and its complete reduction productions or the notorious shuttle effect caused by dissolution of polysulfides. Herein, we have designed a novel sulfur-loading composite of C/Ni/NiO, consisting of flower-like Ni/NiO porous microspheres superficially decorated by sericin-derived carbon, utilized as cathodes of Li–S batteries. The Ni/NiO porous microspheres provide more active sites for electrochemical ionic exchange by using its large surface areas and also provide a strong polar chemical adsorption with polysulfides via forming Ni-S bonds. Additionally, the conductive metallic nickel and sericin-derived biomass carbon can effectively improve reaction kinetics by accelerating electron transport. Based on the synergistic effects, Li–S batteries with the as-prepared S@C/Ni/NiO cathodes deliver a high initial capacity of 1192.2 mAh g−1 at 0.2 C and a low capacity decay of 0.068% within 1000 cycles at 1.0 C. Meanwhile, a high rate up to 5.0 C with a capacity retention of 171.3 mAh g−1 is also achieved.
Similar content being viewed by others
References
Manthiram A, Fu YZ, Chung SH, Zu CX, Su YS (2014) Rechargeable lithium-sulfur batteries. Chem Rev 114:11751–11787
Evers S, Nazar LF (2012) New approaches for high energy density lithium-sulfur battery cathodes. Acc Chem Res 46:1135–1143
Yang Y, Zheng GY, Cui Y (2013) Nanostructured sulfur cathodes. Chem Soc Rev 42:3018–3032
Sun YM, Liu NA, Cui Y (2016) Promises and challenges of nanomaterials for lithium-based rechargeable batteries. Nat Energy 1:16071
Li YJ, Cai YR, Cai ZY, Xu JH, Sonamuthu J, Zhu GC, Militky J, Jin WH, Yao JM (2018) Sulfur-infiltrated yeast-derived nitrogen-rich porous carbon microspheres @ reduced graphene cathode for high-performance lithium-sulfur batteries. Electrochim Acta 285:317–325
Ma XZ, Jin B, Xin PM, Wang HH (2014) Multiwalled carbon nanotubes-sulfur composites with enhanced electrochemical performance for lithium/sulfur batteries. Appl Surf Sci 307:346–350
Wang H, Yang Y, Liang Y, Robinson JT, Li Y (2011) Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur-battery cathode material with high capacity and cycling stability. Nano Lett 11:2644–2647
Zhang K, Zhao Q, Tao Z, Chen J (2013) Composite of sulfur impregnated in porous hollow carbon spheres as the cathode of Li-S batteries with high performance. Nano Res 6:38–46
Wang HQ, Zhang WC, Xu JZ, Guo ZP (2018) Advances in polar materials for lithium-sulfur batteries. Adv Funct Mater 28:1707520
Liu X, Huang JQ, Zhang Q, Mai LQ (2017) Nanostructured metal oxides and sulfides for lithium-sulfur batteries. Adv Mater 29:1601759
Du C, Wu J, Yang P, Li SY, Xu JM, Song KX (2019) Embedding S@TiO2 nano- spheres into MXene layers as high rate cyclability cathodes for lithium-sulfur batteries. Electrochim Acta 295:1067–1074
Wu J, Dai Y, Pan ZJ, Huo DX, Wang T, Zhang HP, Hu J, Yan S (2020) Co3O4 hollow microspheres on polypyrrole nanotubes network enabling long-term cyclability sulfur cathode. Appl Surf Sci 510:145529
Sun R, Bai Y, Luo M, Qu MX, Wang ZH, Sun W, Sun KN (2021) Enhancing polysulfide confinement and electrochemical kinetics by amorphous cobalt phosphide for highly efficient lithium-sulfur batteries. ACS Nano 15:739–750
Niu SZ, Zhang SW, Shi R, Wang JW, Wang WJ, Chen XM, Zhang ZQ, Miao J, Amini A, Zhao YS, Cheng C (2020) Freestanding agaric-like molybdenum carbide/graphene/N-doped carbon foam as effective polysulfide anchor and catalyst for high performance lithium sulfur batteries. Energy Storage Mater 33:73–81
Ci HN, Cai JS, Ma H, Shi ZX, Cui G, Wang ML, Jin J, Wei N, Lu C, Zhao W, Sun JY, Liu ZF (2020) Defective VSe2-graphene heterostructures enabling in situ electrocatalyst evolution for lithium-sulfur batteries. ACS Nano 14:11929–11938
Zha CY, Zhu XR, Deng J, Zhou Y, Li YS, Chen JM, Ding P, Hu YP, Li YF, Chen HY (2020) Facet-tailoring five-coordinated Ti sites and structure-optimizing electron transfer in a bifunctional cathode with titanium nitride nanowire array to boost the performance of Li2S6-based lithium–sulfur batteries. Energy Storage Mater 26:40–45
Zhang LL, Liu DB, Muhammad Z, Wan F, Xie W, Wang YJ, Song L, Niu ZQ, Chen J (2019) Single nickel atoms on nitrogen-doped graphene enabling enhanced kinetics of lithium-sulfur batteries. Adv Mater 31:1903955
Wang DR, Luo D, Zhang YG, Zhao Y, Zhou GF, Shui LL, Chen ZW, Wang X (2021) Deciphering interpenetrated interface of transition metal oxides/phosphates from atomic level for reliable Li/S electrocatalytic behavior. Nano Energy 81:105602
Li JY, Zhang HW, Luo LQ, Li H, He JY, Zu HL, Liu L, Liu H, Wang FY, Song JJ (2021) Blocking polysulfides with a Janus Fe3C/N-CNF@RGO electrode via physiochemical confinement and catalytic conversion for high-performance lithium-sulfur batteries. J Mater Chem A 9:2205–2213
Yang XY, Zu HL, Luo LQ, Zhang HW, Li JY, Yi XB, Liu H, Wang FY, Song JJ (2020) Synergistic tungsten oxide/N, S co-doped carbon nanofibers interlayer as anchor of polysulfides for high-performance lithium-sulfur batteries. J Alloy Compd 833:154969
Zhu YJ, Wang JG, Xie C, Yang M, Zheng ZJ, Yu RB (2020) Hollow multishelled structural NiO as a “shelter” for high-performance Li-S batteries. Mater Chem Front 4:2971–2975
Li HD, Gu SN, Tao BR, Xie YM, Guo F, Zhang SH, Liu BS, Liu JH, Zhang WF, Chang HX (2020) Highly wrinkled NiO nanosheet-based hierarchical structure-reduced fluorographene composite for enhanced performance of lithium-sulfur battery. J Taiwan Inst Chem E 111:205–211
Wu J, Li SY, Yang P, Zhang HP, Du C, Xu JM, Song KX (2019) S@TiO2 nanospheres loaded on PPy matrix for enhanced lithium-sulfur batteries. J Alloys Compd 783:279–285
Meng XH, Deng D (2019) Bio-inspired synthesis of 3-D network of NiO-Ni nanowires on carbonized eggshell membrane for lithium-ion batteries. Chem Eng Sci 194:134–141
Wu J, Pan ZJ, Dai Y, Wang T, Zhang HP, Yan S, Xu JM, Song KX (2020) Encapsulation of sulfur cathodes by serecin-derived carbon/Co3O4 hollow microspheres for the long-term cyclability of lithium-sulfur batteries. J Alloys Compd 823:153912
Madkour M, Abdel-Monem YK, Sagheer FA (2016) Controlled synthesis of NiO and Co3O4 nanoparticles from different coordinated precursors: impact of precursor’s geometry on the nanoparticles characteristics. Ind Eng Chem Res 55:12733–12741
Wang P, Zhang X, Wei Y, Yang P (2019) Ni/NiO nanoparticles embedded inporous graphite nanofibers towards enhanced electrocatalytic performance. Int J Hydrog Energy 44:19792–19804
Yang Y, Sun XD, Han GQ, Liu X, Zhang XY, Sun YF, Zhang M, Cao Z, Sun YJ (2019) Enhanced electrocatalytic hydrogen oxidation on Ni/NiO/C derived from a nickel-based metal-organic framework. Angew Chem 131:10754–10759
Wang J, Liang JN, Wu JZ, Xuan CJ, Wu ZX, Guo XY, Lai CL, Zhu Y, Wang DL (2018) Coordination effect of network NiO nanosheet and a carbon layer on the cathode side in constructing a high-performance lithium-sulfur battery. J Mater Chem A 6:6503–6509
Zhou XY, Chen F, Yang J (2015) Core@shell sulfur@polypyrrole nanoparticles sandwiched in graphene sheets as cathode for lithium-sulfur batteries. J Energy Chem 4:448–455
Kong L, Peng HJ, Huang JQ, Zhu WC, Zhang G, Zhang ZW, Zhai PY, Sun PP, Xie J, Zhang Q (2017) Beaver-dam-like membrane: a robust and sulphifilic MgBO2(OH)/CNT/PP nest separator in Li-S batteries. Energy Storage Mater 8:153–160
Shanthi PM, Hanumantha PJ, Ramalinga K, Gattu B, Datta MK, Kumta PN (2019) Sulfonic acid based complex framework materials (CFM): nanostructured polysulfide immobilization systems for rechargeable lithium-sulfur battery. J Electrochem Soc 166:A1827–A1835
Wang N, Hong Y, Liu TX, Wang Q, Huang J (2021) Sucrose derived microporous-mesoporous carbon for advanced lithium-sulfur batteries. Ceram Int 47:899–906
Gan QM, Wu BC, Qin N, Chen JL, Luo W, Xiao DJ, Feng J, Liu WL, Zhu YH, Zhang PS (2020) Sandwich-like dual carbon layers coated NiO hollow spheres with superior lithium storage performances. Electrochim Acta 343:136121
Han K, Zhang Y, Zhang N, Li G, Zhang L (2020) Graphene-modified porous NiO/C composites as anode materials for Li-ion batteries. J Nanosci Nanotechno 20:2514–2520
Funding
This research was financially supported by Zhejiang Provincial Natural Science Foundation of China (Grant No. LY21E020004, LY19E020011).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Zhu, M., Wu, J., Li, S. et al. Flower-like Ni/NiO microspheres decorated by sericin-derived carbon for high-rate lithium-sulfur batteries. Ionics 27, 5137–5145 (2021). https://doi.org/10.1007/s11581-021-04275-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11581-021-04275-8