Skip to main content
Log in

Solid-state transformer-based new traction drive system and control

  • Research Article
  • Published:
Frontiers of Mechanical Engineering Aims and scope Submit manuscript

Abstract

A new type of traction drive system consisting of solid-state traction transformer (SSTT), inverter unit, auxiliary inverter, traction motor and other key components is built in order to suit the demand of developing the next-generation electric traction system which will be efficient and lightweight, with high power density. For the purpose of reducing system volume and weight and improving efficiency and grid-side power quality, an efficient SSTT optimized topology combining high-voltage cascaded rectifiers with high-power high-frequency LLC resonant converter is proposed. On this basis, an integrated control strategy built upon synchronous rotating reference frame is presented to achieve unified control over fundamental active, reactive and harmonic components. The carrier-interleaving phase shift modulation strategy is proposed to improve the harmonic performance of cascaded rectifiers. In view of the secondary pulsating existing in a single-phase system, the mathematical model of secondary power transfer is built, and the mechanism of pulsating voltage resulting in beat frequency of LLC resonant converter is revealed, so as to design optimum matching of system parameters. Simulation and experimental results have verified that the traction system and control scheme mentioned in this paper are reasonable and superior and that they meet the future application requirements for rail transit.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Fu Y. The research of non-power frequency traction transformer conversion system based LLC resonant conversion. Thesis for the Master’s Degree. Chengdu: Southwest Jiaotong Uninversity, 2015

    Google Scholar 

  2. Kouro S, Malinowski M, Gopakumar K, et al. Recent advances and industrial applications of multilevel converters. IEEE Transactions on Industrial Electronics, 2010, 57(8): 2553–2580

    Article  Google Scholar 

  3. Allebrod S, Hamerski R, Marquardt R. New transformerless, scalable modular multilevel converters for HVDC-transmission. In: Proceedings of IEEE Power Electronics Specialists Conference. Rhodes: IEEE, 2008, 174–179

    Google Scholar 

  4. Song Q, Liu W, Li X, et al. A steady-state analysis method for a modular multilevel converter. IEEE Transactions on Power Electronics, 2013, 28(8): 3702–3713

    Article  Google Scholar 

  5. Glinka M, Marquardt R. A new AC/AC multilevel converter family. IEEE Transactions on Industrial Electronics, 2005, 52(3): 662–669

    Article  Google Scholar 

  6. Inoue S, Akagi H. A bidirectional isolated DC&DC converter as a core circuit of the next-generation medium-voltage power conversion system. IEEE Transactions on Power Electronics, 2007, 22(2): 535–542

    Article  Google Scholar 

  7. Krismer F, Kolar J W. Accurate power loss model derivation of a high-current dual active bridge converter for an automotive application. IEEE Transactions on Industrial Electronics, 2010, 57(3): 881–891

    Article  Google Scholar 

  8. Nymand M, Andersen M A E. High-efficiency isolated boost DCDC converter for high-power low-voltage fuel-cell applications. IEEE Transactions on Industrial Electronics, 2010, 57(2): 505–514

    Article  Google Scholar 

  9. Weigel J, Ag A N S, Hoffmann H. High voltage IGBTs in medium frequency traction power supply. In: Proceedings of 13th European Conference on Power Electronics and Applications. Barcelona: IEEE, 2009

    Google Scholar 

  10. Feng J, Chu W Q, Zhang Z, et al. Power electronic transformer based railway traction systems: Challenges and opportunities. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2017, PP(99): 1

    Google Scholar 

  11. Zhao C, Dujic D, Mester A, et al. Power electronic traction transformer—Medium voltage prototype. IEEE Transactions on Industrial Electronics, 2014, 61(7): 3257–3268

    Article  Google Scholar 

  12. Zhao C, Weiss M, Mester A, et al. Power electronic transformer (PET) converter: Design of a 1.2 MW demonstrator for traction applications. In: Proceedings of 2012 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM). Sorrento: IEEE, 2012, 855–860

    Google Scholar 

  13. Dujic D, Mester A, Chaudhuri T, et al. Laboratory scale prototype of a power electronic transformer for traction applications. In: Proceedings of the 2011–14th European Conference on Power Electronics and Applications (EPE 2011). Birmingham: IEEE, 2011, 1–10

    Google Scholar 

  14. Dujic D, Steinke G K, Bellini M, et al. Characterization of 6.5 kV IGBTs for high-powermedium-frequency soft-switched applications. IEEE Transactions on Power Electronics, 2014, 29(2): 906–919

    Article  Google Scholar 

  15. Besselmann T, Mester A, Dujic D. Power electronic traction transformer efficiency improvements under light-load conditions. IEEE Transactions on Power Electronics, 2014, 29(8): 3971–3981

    Article  Google Scholar 

  16. Falcones S, Mao X, Ayyanar R. Topology comparison for solid state transformer implementation. In: Proceedings of 2010 IEEE Power and Energy Society General Meeting. Minneapolis: IEEE, 2010, 1–8

    Google Scholar 

  17. Shi J, Gou W, Yuan H, et al. Research on voltage and power balance control for cascaded modular solid-state transformer. IEEE Transactions on Power Electronics, 2011, 26(4): 1154–1166

    Article  Google Scholar 

  18. Zhao T, Wang G, Bhattacharya S, et al. Voltage and power balance control for a cascaded H-bridge converter-based solid-state transformer. IEEE Transactions on Power Electronics, 2013, 28(4): 1523–1532

    Article  Google Scholar 

  19. Huber J E, Kolar J W. Common-mode currents in multi-cell solidstate transformers. In: Proceedings of 2014 International Power Electronics Conference. Hiroshima: IEEE, 2014, 766–773

    Google Scholar 

  20. Marchesoni M, Novaro R, Savio S. AC locomotive conversion systems without heavy transformers: Is it a practicable solution? In: Proceedings of the 2002 IEEE International Symposium on Industrial Electronics. IEEE, 2002, 4: 1172–1177

    Google Scholar 

  21. Dujic D, Kieferndorf F, Canales F. Power electronic transformer technology for traction applications—An overview. Electronics, 2012, 16(1): 50–56

    Google Scholar 

  22. Oliveira D S, de A Honorio D, Barreto L H S C, et al. A two-stage AC/DC SST based on modular multilevel converter feasible to AC railway systems. In: Proceedings of 2014 Twenty-Ninth Annual IEEE Applied Power Electronics Conference and Exposition (APEC). Fort Worth: IEEE, 2014, 1894–1901

    Google Scholar 

  23. Feng X. AC Electrical Drives & Control System. Beijing: Higher Education Press, 2009, 272–273 (in Chinese)

    Google Scholar 

  24. Zhou M, You X, Wang C, et al. Switching angle calculation and harmonic analysis of current harmonic minimum PWM. Proceedings of the CSEE, 2014, 34(15): 2362–2370 (in Chinese)

    Google Scholar 

  25. Gou B, Feng X, Song W, et al. Analysis and suppression of beat phenomenon for railway traction converters and motors. Proceedings of the CSEE, 2013, 33(9): 55–63 (in Chinese)

    Google Scholar 

  26. Liu H, Jiao Y, Ming D. Unified power quality controller based on synchronous rotating coordinates. High Power Converter Technology, 2015, 4: 39–43

    Google Scholar 

  27. Jiang Y, Cao Y, Gong Y. Research on the cascade multilevel inverter based on different carrier phase-shifted angle. Proceedings of the CSEE, 2007, 27(1): 76–81 (in Chinese)

    Google Scholar 

  28. Holmes D G, McGrath B P. Opportunities for harmonic cancellation with carrier-based PWM for two-level and multilevel cascaded inverters. IEEE Transactions on Industry Applications, 2001, 37: 564–582

    Google Scholar 

  29. Salam Z, Goodman C. Compensation of fluctuating DC link voltage for traction inverter drive. In: Proceedings of IEEE Sixth International Conference on Power Electronics and Variable Speed Drives. Nottingham: IEEE, 1996: 390–395

    Chapter  Google Scholar 

  30. Wang J, Lu X, Zhang F, et al. Low frequency input current ripple analysis and reduction in a single phase inverter with twostage structure. Proceedings of the CSEE, 2012, 32(6): 10–16 (in Chinese)

    Google Scholar 

  31. Kadavelugu A, Bhattacharya S. Design considerations and development of gate driver for 15 kV SiC IGBT. In: Proceedings of 2014 Twenty-Ninth Annual IEEE Applied Power Electronics Conference and Exposition (APEC). Fort Worth: IEEE, 2014, 1497–1501

    Google Scholar 

  32. Kadavelugu A, Bhattacharya S, Ryu S H, et al. Understanding dv/dt of 15 kV SiC N-IGBT and its control using active gate driver. In: Proceedings of 2014 IEEE Energy Conversion Congress and Exposition (ECCE). Pittsburgh: IEEE, 2014, 2213–2220

    Chapter  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Huadong Liu.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Feng, J., Shang, J., Zhang, Z. et al. Solid-state transformer-based new traction drive system and control. Front. Mech. Eng. 13, 411–426 (2018). https://doi.org/10.1007/s11465-018-0467-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11465-018-0467-0

Keywords

Navigation