Abstract
In nature, rice leaves exhibit special anisotropic sliding capabilities. Although researchers have succeeded in fabricating artificial rice leaf structures and realizing the wettability function of the leaf surface, these methods used to date are complex and do not allow the fabrication of surfaces with large area. Herein, we adopted a simple technology - two steps soft transfer to fabricate biomimetic rice leaf. The fabricated surface well reproduced the structures of the rice leaf surface and exhibited a static superhydrophobic property similar to that of the real rice leaf surface. In terms of its dynamic wettability, it clearly exhibited an anisotropic sliding property. Systematic measurements showed that the sliding angles parallel and perpendicular with the vein direction were 25° and 40°, respectively. The method was simple and reliable, without the need for expensive instruments and complex technologies, which could be used for the rapid fabrication of large-area artificial rice leaf surfaces. We believe that the artificial rice leaf surface fabricated by this method has great potential applications in biomimetic functional surfaces, microfluidics, and so on.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Neinhuis C, Barthlott W. Characterization and distribution of water-repellent, self-cleaning plant surfaces. Ann Bot, 1997, 79: 667–677
Gao X F, Jiang L. Water-repellent legs of water striders. Nature, 2004, 432: 36
Xi J M, Jiang L. Biomimic superhydrophobic surface with high adhesive forces. Ind Eng Chem Res, 2008, 47: 6354–6357
Li M H, He B, Qin H Y, et al. A wet adhesion inspired biomimetic pad with direction dependence and adaptability. Chin Sci Bull, 2011, 56: 1935–1941
Hyuneui L, Jung D H, Noh J H. Simple nanofabrication of a superhydrophobic and transparent biomimetic surface. Chin Sci Bull, 2009, 54: 3613–3616
Feng L, Song Y L, Zhai J, et al. Creation of a superhydrophobic surface from an amphiphilic polymer. Angew Chem Int Ed, 2003, 115: 824–826
Lau K K S, Bico J, Teo K B K, et al. Superhydrophobic carbon nanotube forests. Nano Lett, 2003, 3: 1701–1705
Lu X B, Zhou J H, Zhao Y H, et al. Room temperature ionic liquid based polystyrene nanofibers with superhydrophobicity and conductivity produced by electrospinning. Chem Mater, 2008, 20: 3420–3424
Srinivasan S, Praveen V, Philip R, et al. Bioinspired superhydrophobic coatings of carbon nanotubes and linear π systems based on the “bottom-up” self-assembly approach. Angew Chem Int Ed, 2008, 47: 5750–5754
Wang L, Xu B B, Chen Q D, et al. Maskless laser tailoring of conical pillar arrays for antireflective biomimetic surfaces. Opt Lett, 2011, 36: 3305–3307
Wu D, Chen Q D, Xia H, et al. A facile approach for artificial biomimetic surfaces with both superhydrophobicity and iridescence. Soft Matter, 2010, 6: 263–267
Feng L, Li S H, Li Y S, et al. Super-hydrophobic surfaces: From natural to artificial. Adv Mater, 2002, 14: 1857–1860
Haneveld J, Jansen H, Berenschot E, et al. Wet anisotropic etching for fluidic 1D nanochannels. J Micromech Microeng, 2003, 13: 62–66
Feng R T, Wu X D, Xue Q J. Profile characterization and temperature dependence of droplet control on textured surfaces. Chin Sci Bull, 2011, 56: 1930–1934
Gau H, Herminghaus H, Lenz P, et al. Liquid morphologies on structured surfaces. microchannels to microchips. Science, 1999, 283: 46–49
Wu D, Wu S Z, Chen Q D, et al. Curvature-driven reversible in situ switching between pinned and roll-down superhydrophobic states for water droplet transportation. Adv Mater, 2011, 23: 545–549
Fürstner R, Barthlott W. Wetting and self-cleaning properties of artificial superhydrophobic surfaces. Langmuir, 2005, 21: 956–961
Fang Y, Sun G, Wang T Q. Hydrophobicity mechanism of non-smooth pattern on surface of butterfly wing. Chin Sci Bull, 2007, 52: 711–716
Sommers A D, Jacobi A M. Creating micro-scale surface topology to achieve anisotropic wettability on an aluminum surface. J Micromech Microeng, 2006, 16: 1571–1578
Chung J Y, Youngblood J P, Stafford C M. Anisotropic wetting on tunable micro-wrinkled surfaces. Soft Matter, 2007, 3: 1163–1169
Wu H, Zhang R, Sun Y, et al. Biomimetic nanofiber patterns with controlled wettability. Soft Matter, 2008, 4: 2429–2433
Yang Y L, Hsu C C, Chang T L, et al. Study on wetting properties of periodical nanopatterns by a combinative technique of photolithography and laser interference lithography. Appl Surf Sci, 2010, 256: 3683–3687
Zhang F X, Low H Y. Anisotropic wettability on imprinted hierarchical structures. Langmuir, 2007, 23: 7793–7798
Xia D Y, Brueck S R J. Strongly anisotropic wetting on one-dimensional nanopatterned surfaces. Nano Lett, 2008, 8: 2819–2824
Wu S Z, Wu D, Yao J, et al. One-step preparation of regular micropearl arrays for two-direction controllable anisotropic wetting. Langmuir, 2010, 26: 12012–12016
Wu D, Wang J N, Wu S Z, et al. Three-level biomimetic rice-leaf surfaces with controllable anisotropic sliding. Adv Funct Mater, 2011, 21: 2927–2932
Zheng B, Tice J D, Ismagilov R F. Formation of arrayed droplets by softlithography and two-phase fluid flow, and application in protein crystallization. Adv Mater, 2004, 16: 1365–1368
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is published with open access at Springerlink.com
Rights and permissions
This article is published under an open access license. Please check the 'Copyright Information' section either on this page or in the PDF for details of this license and what re-use is permitted. If your intended use exceeds what is permitted by the license or if you are unable to locate the licence and re-use information, please contact the Rights and Permissions team.
About this article
Cite this article
Yao, J., Wang, J., Yu, Y. et al. Biomimetic fabrication and characterization of an artificial rice leaf surface with anisotropic wetting. Chin. Sci. Bull. 57, 2631–2634 (2012). https://doi.org/10.1007/s11434-012-5220-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11434-012-5220-1