Abstract
Ionic polymer metal composites (IPMCs), a new kind of electro-active polymer, can be used for micro robotic actuators, artificial muscles and dynamic sensors. However, IPMC actuators have the major drawbacks of a low generative blocking force and dependence on a humid environment, which limit their further application. Multiple process parameters for the fabrication of IPMCs were optimized to produce a maximum blocking force; the parameters included reducing agent concentration, platinum salt concentration in the initial compositing process, and tetraethyl orthosilicate (TEOS) content. An orthogonal array method was designed and a series of fabrication experiments were carried out to identify the optimum process parameters. The results show that the platinum salt concentration in the initial compositing process plays the most significant role in improving the blocking force of IPMCs, the TEOS content plays an important role, and the reducing agent concentration has no apparent effect on the blocking force. In the optimized conditions, the IPMC actuator exhibited maximum blocking force of 50 mN, and the corresponding displacement was 14 mm. Compared with normal conditions, the blocking force improved 2.4-fold without sacrificing the displacement, and the effective air-operating life was prolonged 5.8-fold for the blocking force and 5-fold for the displacement. This study lays a solid foundation for further applications of IPMCs.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
NSFC Mechanics and Materials Science Department. Strategic Planning of Mechanical Engineering Discipline (2011–2020)(in Chinese). Beijing: Science Press, 2010
Aliev A E, Oh J, Kozlov M E, et al. Giant-stroke, superelastic carbon nanotube aerogel muscles. Science, 2009, 323: 1575–1578
Lehmann W, Skupin H, Tolksdorf C, et al. Giant lateral electrostriction in ferroelectric liquid-crystalline elastomers. Nature, 2001, 410: 447–450
Liu S, Liu Y, Cebeci H, et al. High electromechanical response of ionic polymer actuators with controlled-morphology aligned carbon nanotube/Nafion Nanocomposite electrodes. Adv Funct Mater, 2010, 20: 3266–3271
Bar-Cohen Y. Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges. Washington: SPIE Press, 2001
Kim K J, Shahinpoor M. Ionic polymer-metal composites: II. Manufacturing techniques. Smart Mater Struct, 2003, 12: 65–79
Shahinpoor M, Kim K J. The effect of surface electrode resistance on the performance of ionic polymer-metal composite (IPMC) artificial muscles. Smart Mater Struc, 2000, 9: 543–551
Lee S G, Park H C, Pandita S D, et al. Performance improvement of IPMC (Ionic Polymer Metal Composites) for a Flapping Actuator. Int J Con Aut Sys, 2006, 4: 748–755
Lee J W, Kim J H, Chun Y S, et al. The performance of Nafion-based IPMC actuators containing polypyrrole/alumina composite fillers. Macromol Res, 2009, 17: 1032–1038
Shahinpoor M, Kim K J. Ionic polymer-metal composites: IV. Industrial and medical applications. Smart Mater Struc, 2005, 14: 197–214
Park I S, Kim S M, Pugal D, et al. Visualization of the cation migration in ionic polymer-metal composite under an electric field. Appl Phys Lett, 2010, 96: 0433011–0433013
Shoji E, Hirayama D. The effects of the potential and polarization time on the performance of ionic polymer metal composite actuators: A control of forward and reverse displacements. Polym Adv Technol, 2007, 18: 346–352
Tiwari R, Kim K J. Disc-shaped ionic polymer metal composites for use in mechano-electrical applications. Smart Mater Struct, 2010, 19: 0650161–0650167
Yu M, Shen H, Dai Z D. Manufacture and performance of Ionic polymer-metal composites. J Bionic Eng, 2007, 4: 143–149
Zhang W, Guo S X, Asaka K. A New Type of Hybrid Fish-like Microrobot. Int J Autom Comp, 2006, 4: 358–365
Yeom S W, OH I K. A biomimetic jellyfish robot based on ionic polymer metal composite actuators. Smart Mater Struct, 2009, 18: 10
Kim K J, Shahinpoor M. A novel method manufacturing three-dimensional ionic polymer-metal composites (IPMC) biomimetic sensors, actuators and artificial muscles. Polymer, 2002, 43: 797–802
Onishi K, Sewa S, Asaka K, et al. Morphology of electrodes and bending response of the polymer electrolyte actuator. Electrochim Acta, 2000, 46: 737–743
Lee S J, Han M J, Kim S J, et al. A new fabrication method for IPMC actuators and application to artificial fingers. Smart Mater Struct, 2006, 15: 1217–1224
Lee D Y, Park I S, Lee M H, et al. Ionic polymer-metal composite bending actuator loaded with multi-walled carbon nanotubes. Sens Actuators A, 2007, 133: 117–127
Guo D J, Ding H T, Wei H J, et, al. Hybrids perfluorosulfonic acid ionomer and silicon oxide membrane for application in ion-exchange polymer-metal composite actuators. Sci China Ser E: Tech Sci, 2009, 52: 3061–3070
Millet P. Preparation of solid polymer electrolyte composites: Investigation of the ion-exchange process. J Appl Elec, 1995, 25: 227–232
Millet P. Preparation of solid polymer electrolyte composites: Investigation of the precipitation process. J Appl Elec, 1995, 25: 233–239
Lee J H, Lee J H, Nam J D, et al. Water uptake and migration effects of electroactive ion-exchange polymer metal composite (IPMC) actuator. Sens Actuators A, 2005, 118: 98–106
Lee J W, Yoo Y T. Anion effects in imidazolium ionic liquids on the performance of IPMCs. Sens Actuators B, 2009, 137: 539–546
Bennett M D, Leo D J. Ionic liquids as stable solvents for ionic polymer transducers. Sens Actuators A, 2004, 115: 79–90
Nguyen V K, Lee J W, Yoo Y T. Characteristics and performance of ionic polymer-metal composite actuators based on Nafion/layered silicate and Nafion/silica nanocomposites. Sens Actuators B, 2007, 120: 529–537
Kim S J, Lee I T, Kim Y H. Performance enhancement of IPMC actuator by plasma surface treatment. Smart Mater Struct, 2007, 16: N6–N11
Author information
Authors and Affiliations
Corresponding author
Additional information
These authors contributed equally to the work
This article is published with open access at Springerlink.com
Rights and permissions
This article is published under an open access license. Please check the 'Copyright Information' section either on this page or in the PDF for details of this license and what re-use is permitted. If your intended use exceeds what is permitted by the license or if you are unable to locate the licence and re-use information, please contact the Rights and Permissions team.
About this article
Cite this article
Yu, M., He, Q., Ding, Y. et al. Force optimization of ionic polymer metal composite actuators by an orthogonal array method. Chin. Sci. Bull. 56, 2061–2070 (2011). https://doi.org/10.1007/s11434-011-4509-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11434-011-4509-9