Skip to main content
Log in

Improved electrical resistance-pressure strain sensitivity of carbon nanotube network/polydimethylsiloxane composite using filtration and transfer process

  • Articles
  • Mechnical Engineering
  • Published:
Chinese Science Bulletin

Abstract

The electrical resistance-pressure strain sensitivity of carbon nanotube network (NTN)/polymer composite is investigated. In this research, polydimethylsiloxane (PDMS) is used as the polymer matrix. The composite of NTN embedded in PDMS matrix has been fabricated by using filtration and transfer process. The thickness of NTN/PDMS composite can be controlled. Electrical resistance and pressure strain of the NTN/PDMS composite are measured simultaneously. Electrical resistance of NTN/PDMS composite has been obtained as a function of pressure strain. The NTN/PDMS composite exhibits linear change in electrical resistance as a result of pressure strain and has improved electrical resistance-pressure strain sensitivity. The NTN/PDMS composite has 90.6% resistance change at 6% pressure strain. The electrical resistance-pressure strain sensitivity of NTN/PDMS composite using filtration and transfer process is 2.13 times of the traditional NTN/PDMS composite. The characteristic in electrical resistance change implies that NTN/PDMS composite can be used as pressure strain sensors and applied to sensor systems.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Sumio I. Helical microtubules of graphitic carbon. Nature, 1991, 354: 56–58

    Article  Google Scholar 

  2. Hu L, Hecht D S, Gruner G. Percolation in transparent and conducting carbon nanotube networks. Nano Lett, 2004, 4: 2513–2517

    Article  Google Scholar 

  3. Christofer H, Alain J, Christoph S, et al. Nano electromechanical sensors based on carbon nanotubes. Sensor Actuat A-Phys, 2007, 136: 51–61

    Article  Google Scholar 

  4. Hu C H, Liu C H, Chen L Z, et al. Resistance-pressure sensitivity and a mechanism study of multiwall carbon nanotube networks/poly (dimethylsiloxane) composites. Appl Phys Lett, 2008, 93: 033108

    Article  Google Scholar 

  5. Wang Z, Liang Z Y, Wang B, et al. Processing and property investigation of single-walled carbon nanotube (SWNT) buckypaper/epoxy resin matrix nanocomposites. Composites Part A, 2004, 35: 1225–1232

    Article  Google Scholar 

  6. Kang I, Schulz M J, Kim J H, et al. A carbon nanotube strain sensor for structural health monitoring. Smart Mater Sturct, 2006, 15: 737–748

    Article  Google Scholar 

  7. Wu Z C, Chen Z H, Du X, et al. Transparent, conductive carbon nanotube films. Science, 2004, 305: 1273–1276

    Article  Google Scholar 

  8. Kim Y, Minami N, Zhu W. Langmuir-blodgett films of single-wall carbon nanotubes. J Appl Phys, 2003, 42: 7629–7634

    Article  Google Scholar 

  9. Erik T T, Chou T W. Carbon nanotube networks: sensing of distributed strain and damage for life prediction and self healing. Adv Mater, 2006, 18: 2837–2841

    Article  Google Scholar 

  10. Rui Z, Mark B, Ton P. Universal resistivity strain dependence of carbon nanotube/polymer composites. Phys Rev B, 2007, 76: 195433

    Article  Google Scholar 

  11. Tran M Q, Cabral J T, Shaffer M S P, et al. Direct Measurement of the wetting behavior of individual carbon nanotubes by polymer melts: The key to carbon nanotube-polymer composites. Nano Lett, 2008, 8: 2744–2750

    Article  Google Scholar 

  12. Alig I, Lellinger D, Engel M, et al. Destruction and formation of a conductive carbon nanotube network in polymer melts: In-line experiments. Polymer, 2008, 49: 1902–1909

    Article  Google Scholar 

  13. Jiang M J, Dang Z M, Xu H P. Giant dielectric constant and resistance-pressure sensitivity in carbon nanotubes/rubber nanocomposites with low percolation threshold. Appl Phys Lett, 2004, 90: 042914

    Article  Google Scholar 

  14. Li H J, Lu W G, Li J J, et al. Multichannel ballistic transport in multiwall carbon nanotubes. Phys Rev Lett, 2005, 95: 086601

    Article  Google Scholar 

  15. Gulseren O, Yildirim T, Ciraci S S. Reversible band-gap engineering in carbon nanotubes by radial deformation. Phys Rev B, 2002, 65: 155410

    Article  Google Scholar 

  16. Lu J Q, Wu J, Duan W H, et al. Metal-to-semiconductor transition in squashed armchair carbon nanotubes. Phys Rev Lett, 2003, 90: 156601

    Article  Google Scholar 

  17. Lammert P E, Pei H Z, Vincent H H. Gapping by squashing: Metal-insulator and insulator-metal transitions in collapsed carbon nanotubes. Phys Rev Lett, 2000, 84: 2453–2456

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to ZhiYing Gan or Sheng Liu.

About this article

Cite this article

Lü, Q., Cao, H., Song, X. et al. Improved electrical resistance-pressure strain sensitivity of carbon nanotube network/polydimethylsiloxane composite using filtration and transfer process. Chin. Sci. Bull. 55, 326–330 (2010). https://doi.org/10.1007/s11434-009-0562-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11434-009-0562-z

Keywords

Navigation