Abstract
Deposition of granular materials into a container is a general industrial packing process. In this study, the deposition behaviour of dilute granular mixtures consisting of two types of particles that were of the same particle size but different particle densities in the presence of air was numerically analyzed using a coupled discrete element method (DEM) and computational fluid dynamics (CFD). Bilayer granular mixtures with light particles at bottom and heavy particles at top were first simulated. It was found that the presence of air significantly affected the flow behaviour of the bilayer mixtures. For the system with a relatively low initial void fraction, the air entrapped inside the container escaped through the dilated zones induced due to the friction between the powder bed and wall surfaces. The escaping air streams entrained light particles that were originally located at the bottom of the granular system. Consequently, these light particles were migrated to the top of the granular bed at the end of deposition process. More light particles were migrated when the deposition distance was increased. For the system with a high initial void fraction, some light particles penetrated into the top layer of heavy particles and created a mixing zone. Deposition of random mixtures with different initial void fractions was also investigated and the influence of initial void fraction on the segregation behaviour was explored as well. It was found that the increase of void fraction promoted segregation during the deposition in air. It was demonstrated that, for granular mixtures consisting of particles of different air sensitivities, the presence of air had a significant impact on the mixing and segregation behaviour during the deposition.
Similar content being viewed by others
References
Rhodes M. Introduction to Particle Technology. Chichester, England: John Wiley & Sons Ltd, 1998
Arteaga P, Tüzün U. Flow of binary of equal-density granules in hoppers-size segregation, flowing density and discharge rates. Chem Eng Sci, 1990, 45: 205–223
Ketterhagen W R, Curtis J S, Wassgren C R, et al. Granular segregation in discharging cylindrical hoppers: A discrete element and experimental study. Chem Eng Sci, 2007, 62: 6423–6439
Feng Y Q, Yu A B. Microdynamic modelling and analysis of the mixing and segregation of binary mixtures of particles in gas fluidization. Chem Eng Sci, 2007, 62: 256–268
Williams J C. Segregation of particulate materials—a review. Pow der Tech, 1976, 15: 246–251
Fan L T, Chen Y M, Lai F S. Recent developments in solids mixing. Powder Tech, 1990, 61: 255–287
Makse H A, Havlin S, King P R, et al. Spontaneous stratification in granular mixtures. Nature, 1997, 386: 379–382
Shi Q, Sun G, Hou M Y, et al. Density-driven segregation in vertically vibrated binary granular mixtures. Phys Rev E, 2007, 75: 061302
Yang S C. Density effect on mixing and segregation processes in a vibrated binary granular mixture. Powder Tech, 2006, 164: 65–74
Burtally N, King P J, Swift M R. Spontaneous air-driven separation in vertically vibrated fine granular mixtures. Science, 2002, 295: 1877–1879
Zeilstra C, van der Hoef M A, Kuipers J A M. Simulation study of air-induced segregation of equal-sized bronze and glass particles. Phys Rev E, 2006, 74: 010302(R)
Zeilstra C, van der Hoef M A, Kuipers J A M. Simulation of density segregation in vibrated beds. Phys Rev E, 2008, 77: 031309
Guo Y, Kafui K D, Wu C Y, et al. A coupled DEM/CFD analysis of the effect of air on powder flow during die filling. AIChE J, 2009, 55: 49–62
Wu C Y, Guo Y, Nikoosaleh S, et al. Competing flow of dissimilar granular materials in air. Powders Grains, 2009, in press
Kafui K D, Thornton C, Adams M J. Discrete particle-continuum fluid modelling of gas-solid fluidised beds. Chem Eng Sci, 2002, 57: 2395–2410
Johnson K L. Contact Mechanics. Cambridge: Cambridge University Press, 1985
Mindlin R D, Deresiewicz H. Elastic spheres in contact under varying oblique forces. J Appl Mech, 1953, 20: 327–344
Wu C Y, Cocks A C F. Numerical and experimental investigations of the flow of powder into a confined space. Mech Mater, 2006, 38: 304–324
Wu C Y. DEM simulations of die filling during pharmaceutical tabletting. Particuology, 2008, 6: 412–418
Wu C Y, Cocks A C F, Gillia O T. Die filling and powder transfer. Intern J Powder Metal, 2003, 39: 51–64
Author information
Authors and Affiliations
Corresponding author
Additional information
Supported by the Engineering and Physical Sciences Research Council (EPSRC), United Kingdom, through the EPSRC Advanced Research Fellowship Scheme (Grant Nos. EP/C545230 and EP/C545249)
About this article
Cite this article
Yu, S., Guo, Y. & Wu, CY. DEM/CFD modelling of the deposition of dilute granular systems in a vertical container. Chin. Sci. Bull. 54, 4318–4326 (2009). https://doi.org/10.1007/s11434-009-0474-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11434-009-0474-y