Abstract
During locomotion, insect feet endure dramatic impact force and generate adhesive force which is controlled by the architecture of the foot. The patterns of smooth attachment pads in insect feet vary widely among insect orders and families. The functional significance of the micro-structure and geometric design of insect feet remains largely unknown. In this study, we developed a two-dimensional finite element model of a grasshopper’s attachment pad. Realistic geometric microstructure and material properties are applied in the biomechanical analysis of the structural behavior during contact. Here we use scanning electronic microscopy to study the microstructure of the grasshopper’s pad, and then use the finite element method to calculate the deformation vector fields, contact stiffness, contact area, function of the airbag and strain fields during the contact process. The results reveal that the geometric design and material topology of a grasshopper’s pads are very effective in reducing contact stiffness, increasing contact area and generating high friction force during the contact procedure. The rod-containing structure supporting the soft exocuticle makes the pads highly adaptive to various surfaces and decreases the stress inside the pads.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles and news from researchers in related subjects, suggested using machine learning.Avoid common mistakes on your manuscript.
References
Dai Z D, Yu M, Ji A H, et al. Friction design of animal’s driving pads and its bionics (in Chinese). Chin Mech Eng, 2005, 16(16): 1454–1457
Flannigan W C. Finite element modeling of arthropod exoskeleton. Thesis of master of sciences, Case Western Reserve University, May 1998
Cheung J T M, Zhang M, Leung A K L, et al. Three-dimensional finite element analysis of the foot during standing-a material sensitivity study. J Biomech, 2005, 38 (5): 1045–1054
Cheung J T M, Zhang M. A 3-dimensional finite element model of the human foot and ankle for insole design. Archi Phy Med Reha, 2005, 86(2): 353–358
Cavanagh P R. Plantar soft tissue thickness during ground contact in walking. J Biomech, 1999, 32(6): 623–628
Dong X, Fan Y B, Zhang M, et al. Studies on Biomechanics of Human Foot: a Review. J Biom Engi, 2002, 19(1): 148–153
Gefen A, Megido-Ravid M, Itzchak Y, et al. Biomechanical analysis of the three-dimensional foot structure during gait: A basic tool for clinical applications. J Biom Engi-Trans ASME, 2000, 122(6): 630–639
Gefen A, Linder-Ganz E. Diffusion of ulcers in the diabetic foot is promoted by stiffening of plantar muscular tissue under excessive bone compression (in German). Orthopade, 2004, 33(9): 999–1012
Richmond B G, Wright B W, Grosse L, et al. Finite element analysis in functional morphology. Anatomical record part A, 2005, 283A(2): 259–274
Hanft J T, Hogan H A, Hood D M. Three-dimensional finite element modeling of the horse’s foot. In: Proceedings of the 1995 fourteenth Biomedical Engineering Conference, 7–9, Apr. 1995, Shreveport, LA, USA, 59–62
Kesel A B, Philippi U, Nachtigall W. Biomechanical aspects of the insect wing: an analysis using the finite element method. Comp Biol Medi, 1998, 28: 423–437
Herbert R C, Young P G., Smith C W, et al. The hind wing of the desert locust (Schistocerca gregaria Forskal) III. A finite element analysis of a deployable structure. J Exp Biol, 2000, 203: 2945–2955
Wootton R J, Evans K E, Herbert R, et al. The hind wing of the desert locust (Schistocerca gregaria Forskal) I. Functional morphology and mode of operation. J Exp Biol, 2000, 203: 2921–2931
Dickinson M H, Farley C T, Full R J, et al. How animals move: an integrative view. Science, 2000, 288: 100–106
Nishikawa M, Kumagai T. 1990. Foot structure for legged walking robot. EP 0433091A2
Berges P, Bowling A. Impact Forces in Legged Robot Locomotion. In: Proceedings of the 2005 IEEE International Conference on Robotics and Automation Barcelona, Spain, April 2005, 3745–3751
Gorb N S, Jiao Y K, Scherge M. Ultrastructureal architecture and mechanical properties of attachment pads in Tettigonia viridissima (Orthoptera Tettigoniidae). J Compa Phys, 2000, 186: 821–831
Jiao Y K, Gorb N S, Scherge M. Adhesion measured on the attachment pads of Tettigonia viridissima (Orthoptera Insecta). J Exp Biol, 2000, 203, 1887–1895
Goodwyn P P, Perssadko A, Schwart H, et al. Material structure, stiffness, and adhesion: why attachment pads of the grasshopper (Tettigonia viridissima) adhere more strongly than those of the grasshopper (Grasshoppera migratoia) (Insecta: Orthoptera). J Comp Physiol, 2006, 192: 1233–1243
Gorb N S, Scherge M. Biological microtribology: anisotropy in frictional forces of orthopteran attachment pads reflects the ultrastructure of a highly deformable materials, Proc. R. Soc. Lond, B 2000, 267: 1–7
Stork N E. Experimental analysis of adhesive of Chrysolina polita (Chrysomelidae, Coleptera) on a variety of surfaces. J Exp Biol, 1980, 88: 583–597
Dixon A F G., Croghan P C, Gowing R P. The mechanism by which aphids adhere to smooth surface. J Exp Biol, 1999, 52: 243–253
Autumn K, Liang Y A, Hsieh S T, et al. Adhesive force of a single gecko foot-hair. Nature, 2000, 405: 681–685
Autumn K, Sitti M, Liang Y A, et al. Evidence for van der Waals adhesion in gecko setae. Proc Natl Acad Sci USA, 2002, 99, 12252–12256
Gao H J, Wang X, Yao H M, et al. Mechanics of hierarchical adhesion structures of geckos. Mech Mater, 2005, 37: 275–285
Gillett J D, Wigglesworth V B. The climbing organ of an insect, Rhodnius prolixus (Hemiptera, Reduviidae). Proc R Sco Lond B 1932, 111: 364–376
Maderson P F A. Keratinized epidermal derivatives as an aid to climbing in gekkonid lizards. Nature, 1964, 203: 780–781
Gabriel J M. The development of the locust jumping mechanism. II energy storage and muscle mechanics. J Exp Biol, 1985, 118: 327–340
Santer R D, Yamawaki Y, Rind F C, et al. Motor activity and trajectory control during escape jumping in the locust Locusta migratoria. J Comp Physiol A, 2005, 191: 965–975
Author information
Authors and Affiliations
Corresponding authors
Additional information
Supported by the National Natural Science Foundation of China (Grants Nos. 60535020, 50635030 and 50675160) and the Development Plan of the State Key Fundamental Research (Grant No. 2007CB607600)
Rights and permissions
This article is published under an open access license. Please check the 'Copyright Information' section either on this page or in the PDF for details of this license and what re-use is permitted. If your intended use exceeds what is permitted by the license or if you are unable to locate the licence and re-use information, please contact the Rights and Permissions team.
About this article
Cite this article
Dai, Z., Gorb, S. Contact mechanics of pad of grasshopper (Insecta: ORTHOPTERA) by finite element methods. Chin. Sci. Bull. 54, 549–555 (2009). https://doi.org/10.1007/s11434-009-0088-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11434-009-0088-4