Abstract
The prediction of laminar-turbulent transition in boundary layer is very important for obtaining accurate aerodynamic characteristics with computational fluid dynamic (CFD) tools, because laminar-turbulent transition is directly related to complex flow phenomena in boundary layer and separated flow in space. Unfortunately, the transition effect isn’t included in today’s major CFD tools because of non-local calculations in transition modeling. In this paper, Menter’s γ-Re θ transition model is calibrated and incorporated into a Reynolds-Averaged Navier-Stokes (RANS) code — Trisonic Platform (TRIP) developed in China Aerodynamic Research and Development Center (CARDC). Based on the experimental data of flat plate from the literature, the empirical correlations involved in the transition model are modified and calibrated numerically. Numerical simulation for low-speed flow of Trapezoidal Wing (Trap Wing) is performed and compared with the corresponding experimental data. It is indicated that the γ-Re θ transition model can accurately predict the location of separation-induced transition and natural transition in the flow region with moderate pressure gradient. The transition model effectively imporves the simulation accuracy of the boundary layer and aerodynamic characteristics.
References
Bertin J J, Cummings R M. Critical hypersonic aerothermodynamic phenomena. Annu Rev Fluid Mech, 2006, 38: 129–57
Dhawan S, Narasimha R. Some properties of boundary layer flow during transition from Laminar to turbulent motion. J Fluid Mech, 1958, 3(4): 418–436
Cho J R, Chung M K. A k-ɛ-γ equation turbulence model. J Fluid Mech, 1992, 237: 301–322
Steelant J, Dick E. Modelling of bypass transition with conditioned Navier-Stokes equations coupled to an intermittency transport equation. Int J Numer Methods Fluids, 1996, 23: 193–220
Suzen Y, Huang P. Modeling of flow transition using an intermittency transport equation. J Fluids Eng, 2000, 122(2): 273–284
Fu S, Wang L. Progress in turbulence/transition modelling. Adv Mech, 2007, 37(3): 409–416
Fu S, Wang L. RANS modeling of high-speed aerodynamic flow transition with consideration of stability theory. Prog Aerospace Sci, 2013, 58: 36–59
Wang L, Fu S. Development of an intermittency equation for the modeling of the supersonic/hypersonic boundary layer flow transition. Flow Turbulence Combustion, 2011, 87(1): 165–187
Menter F R, Langtry R B, Likki S R, et al. A correlation based transition model using local variables: part I-model formulation. J Turbomachinery, 2006, 128: 413–422
Langtry R B. A Correlation-Based Transition Model Using Local Variables for Unstructured Parallelized CFD Codes. Dissertation for the Doctoral Degree. Stuttgart: Universität Stuttgart, 2006
Langtry R B, Menter F R. Transition modeling for general CFD applications in aeronautics. AIAA Paper, 2005, AIAA-2005-0522
Misaka T, Obayashi S. Application of correlation-based transition models to flows around wings. AIAA Paper, 2006, AIAA-2006-918
Pettersson K, Crippa S. Implementation and verification of a correlation based transition prediction method. AIAA Paper, 2008, AIAA-2008-4401
Malan P, Suluksna K, Juntasaro E. Calibrating the γ-Re θ transition model for commercial CFD. AIAA Paper, 2009, AIAA-2009-1142
Spalart P R, Rumsey C L. Effective inflow conditions for turbulence models in aerodynamic calculations. AIAA J, 2007, 45(10): 2544–2553
Zhang Y L, Wang G X, Meng D H, et al. Calibration of γ-Re θ transition model. Acta Aerodyn Sin, 2011, 29(3): 295–301
Wang Y T, Zhang Y L, Hong J W, et al. Development and application of TRIP2.0_SOLVER. Acta Aerodyn Sin, 2007, 25(2): 163–188
Wang Y T, Wang G X, Zhang Y L. Drag prediction of DLR-F6 configuration with TRIP2.0 software. Acta Aerodyn Sin, 2009, 27(1): 108–113
Wang G X, Wang Y T. Development and validation of turbulence models of TRIP2.0. Aeronaut Comput Tech, 2007, 37(3): 20–23
Wang Y T, Wang G X, Zhang Y L. Numerical study of complex flow over 30P-30N multi-element. Acta Aerodyn Sin, 2010, 28(1): 99–113
Meng D H, Zhang Y L, Wang G X, et al. Application of γ-Re θ transition model to two-dimensional low speed flows. Acta Aeronout Astronaut Sin, 2011, 32(5): 792–801
Slotnick J P, Hannon J A, Chaffin M. Overview of the first AIAA CFD high lift prediction workshop. AIAA Paper, 2011, AIAA-2011-862
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, Y., Zhang, Y., Meng, D. et al. Calibration of a γ-Re θ transition model and its application in low-speed flows. Sci. China Phys. Mech. Astron. 57, 2357–2360 (2014). https://doi.org/10.1007/s11433-014-5565-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11433-014-5565-3